Refine by
Geothermal Application Equipment & Supplies
65 equipment items found
Manufactured by:MARL Technologies Inc. based inEdmonton, ALBERTA (CANADA)
The Fraste Multidrill ML is well-known and highly popular with drillers worldwide.As one of the most compact drills in the Fraste Multidrill series, the ML is an excellent choice for rotary drilling with direct or reverse fluid circulation, down the hole hammer, augers, conventional and wire-line coring, roto-percussion, geothermal drilling, geotechnical investigation and environmental ...
Manufactured by:Hütte Bohrtechnik GmbH based inOlpe/Biggesee, GERMANY
The Hütte HBR 204 GT represents state-of-the-art hydraulic drill rig technology specifically designed for geothermal drilling applications. Building upon the proven foundation of the HBR 205 GT, this model brings forth enhanced efficiency and productivity in a compact and lightweight frame. Despite its reduced size, it boasts the same maximum rotary head torque, ...
Manufactured by:Halco Rock Tools based inWest Yorkshire, UNITED KINGDOM
The GP400 is a high performance hammer which can drill under a head of water, typically suited to Waterwell and Geothermal applications due to its non-ported piston ...
Manufactured by:Bauer Mat Slurry Handling Systems - BAUER Group based inImmenstadt - Seifen, GERMANY
The BE 100 is a compact and powerful desanding unit specifically designed for small volumes of suspension, as commonly encountered in geothermal applications. Thanks to its short installation time and low power requirements, it offers a cost-effective solution even for small construction sites. With a connected load of just 17.3 kW, the system can be quickly ...
Manufactured by:Geo-Systems USA based inGrand Prairie, TEXAS (USA)
BH20 is GeoPro’s conventional, non-thermally enhanced grout designed for use in bore hole sealing applications and geothermal applications where a thermal conductivity value of no more than 0.42 Btu/hr-ft-°F is required. Mixed as a 20% – 25% solids grout, BH20 sets into a semi-rigid plug well suited for sealing well casings, ...
Distributed by:GeoPro, Inc. based inElkton, SOUTH DAKOTA (USA)
BH20 is GeoPro’s conventional, non-thermally enhanced grout designed for use in bore hole sealing applications and geothermal applications where a thermal conductivity value of no more than 0.42 Btu/hr-ft-°F is required. Mixed as a 20% - 25% solids grout, BH20 sets into a semi-rigid plug well suited for sealing well casings, ...
by:Iceland Drilling Company Ltd. (IDC) based inKópavogur, ICELAND
Principal Particulars: Drilling depth theoretical: 5.500 m / 17.800 ft with 5″ DP range 3. Year of construction: 2007. Fast moving trailer mounted automatic drilling rig. Designed for cold climate and Geothermal applications and is fully capable of working in heavy winds. Year of construction 2007. It is capable of drilling to 5500 m. with 3 ½“ ...
Manufactured by:Webco Industries, Inc. based inSand Springs, OKLAHOMA (USA)
Designed to withstand harsh environments, Webco’s LaserLine corrosion-resistant coiled tubing is ideal for upstream oil and gas, geothermal, and downhole applications. Using a combination of the highest-quality strip splice and tube-to-tube orbital welds, Webco produces long-length coiled tubing onto IPPC-certified wood or metal reels up to 30,000 feet ...
Manufactured by:Massenza Drilling Rigs based inParola, ITALY
The rig is designed for drilling up to 450 m and is used for water wells, geothermal applications, geotechnics, coring, seismic. Compactness and solidity are the main characteristics of the rig which is designed to work with several drilling methods: reverse circulation by mud and by air, down the hole hammer drilling, conventional circulation. ...
Manufactured by:Massenza Drilling Rigs based inParola, ITALY
Powerful and innovative drilling rig. Perfect for water wells, mineral researches, geothermal applications and coring at great depths. Thanks to its pull up of 55 tons and a rotary head torque of 23.500 Nm, the MI55 E can indeed arrive up to 1400 m. The special feature of this drilling rig, however, is to be the first real electric rig with zero emissions. ...
Manufactured by:Hütte Bohrtechnik GmbH based inOlpe/Biggesee, GERMANY
Hütte Bohrtechnik, with over 40 years of experience, continues to deliver innovative solutions in micropiles, anchors, geothermal applications, and jet grouting, ensuring reliable performance across the ...
Manufactured by:Massenza Drilling Rigs based inParola, ITALY
It is a very versatile drilling rig used for various applications: water wells (beyond 250 m), geothermal applications, geotechnics and seismic. The rig can be either crawler or truck mounted and he can work by all the main drilling methods: mud pump, coring, augering, down the hole hammer drilling using an adequate compressor. ...
Manufactured by:Massenza Drilling Rigs based inParola, ITALY
Drilling rig for water wells, mineral exploration, geothermal applications, coring, seismic. It can drill up to 1100 m and it is possible to mount a mud pump or a high capacity compressor depending on the various needs. The rig can be mounted on truck or on semi-trailer (in this case it is possible to handle 9 m drill pipes). ...
Manufactured by:Massenza Drilling Rigs based inParola, ITALY
The rig is used for various applications, water wells, mineral exploration, deep geothermal applications, coring, seismic. It can drill up to 1500 m and it can be equipped with mud pump or compressor, depending on the customer’s needs. The rig can be mounted on truck or on semi-trailer (in this case it is possible to handle 9 m drill ...
Manufactured by:Massenza Drilling Rigs based inParola, ITALY
Drilling rig for water wells, mineral explorations, seismic, coring and deep geothermal applications. Although its moderate dimensions it has high technical characteristics in terms of pull up and torque: for this reason the rig able to reach high depths (around 800 m). It is possible to work by mud pump 7”1/2x8” which vastly improves drilling also in ...
Manufactured by:Massenza Drilling Rigs based inParola, ITALY
Drilling rig for water wells, mineral exploration, geothermal applications, coring, seismic. It can drill up to 1000 m and it is possible to mount a mud pump or a high capacity compressor depending on the various needs. The rig can be mounted on truck or on semi-trailer (in this case it is possible to handle 9 m drill pipes). ...
Manufactured by:Sera Plastik based inAntalya, TURKEY
Solar resistance period, thickness and other optional additives of greenhouse covers are determined according to the intended application (flower, vegetable, fruit, traditional agriculture, hydroponic agriculture, geothermal application, etc.) and the location where it will be ...
Manufactured by:Massenza Drilling Rigs based inParola, ITALY
Drilling rig for water wells, mineral exploration, geothermal applications, coring, seismic, it is the most representative in the Massenza’s production range as although the moderate dimensions it has high technical characteristics in terms of pull-up and torque. For these reasons the rig can reach high depths, around (700m) and it is possible to work by ...
Manufactured by:Massenza Drilling Rigs based inParola, ITALY
Solidly constructed and versatile the rig is used for various applications: small water wells, geothermal applications, soil investigations, coring and micro piles. The rig is designed for working safely with various drilling methods: direct circulation, down the hole hammer drilling and augering. Thanks to the remote radio control the rig can be ...
Manufactured by:Geotherm based inKyiv, UKRAINE
The Ø40 mm U-turn geothermal probe is designed for assembling geothermal probes directly at the installation site, tailored to actual borehole depths and distribution manifold connections. Utilizing high-quality polyethylene pipe and fittings, specifically molded polyethylene couplings, this system ensures a highly reliable and speedy assembly process with ...