Refine by
Ground Conductivity Equipment & Supplies
40 equipment items found
by:Apex Geoservices Ltd based inWexford, IRELAND
Ground Conductivity Mapping is an electromagnetic technique used to investigate lateral variations in overburden material and variations in depth to bedrock. This EM31 survey technique (shown below) determines the apparent conductivity of the ground material from 0-6 m ...
Manufactured by:M.G. Chemicals based inBurlington, ONTARIO (CANADA)
This carbon paint consists of a 1-part, solvent-based acrylic lacquer, pigmented with highly conductive carbon powder. It is smooth, durable, and abrasion resistant. It can be easily applied by brush or spray. It has a quick dry time, with no heat cure necessary. It adheres strongly to most injection-molded plastics, such as ABS, PVC, nylon and polycarbonate. It provides strong ...
by:TerraDat based inCardiff, UNITED KINGDOM
The problem of characterising both active and closed landfills and waste sites is an increasing one in the light of increasing environmental legislation and poor historical records. A TerraDat geophysical survey can be rapidly carried out for a fraction of the cost of obtaining low-resolution information through invasive means, without disturbing the ...
Manufactured by:TransDigm Group Inc based inCleveland, OHIO (USA)
TA Aerospace conductive loop/saddle clamps are patented, conductive grounding clamps that provides a low resistance pathway from the payload to the aircraft ...
Manufactured by:Dontech based inDoylestown, PENNSYLVANIA (USA)
Conductive optical ground plane options include transparent conductive coatings and conductive optical grids. These conductive ground planes can be applied to the surfaces of glass, plastic, and crystalline substrates. Conductive materials can be laminated between two substrates, ...
Manufactured by:Luvata Oy based inPori, FINLAND
Copper is one of the safest materials for electrical earthing because it is durable, resists corrosion in soil and enables a quick discharge when lightning strikes. Our copper tapes are commonly used for electric conducting, grounding and lightning protection. Luvata’s copper tapes are produced from high quality copper according to customers’ ...
Manufactured by:Eltex-Elektrostatik-GmbH based inWeil am Rhein, GERMANY
Eltex's TERRALIGHT active grounding system addresses safety concerns when dealing with highly flammable materials in manual processes. Given the potential for explosion due to uncontrolled electrostatic sparks, TERRALIGHT ensures protection by verifying that grounding contacts have a conductive connection to objects being ...
Manufactured by:ProGlass Inc. based inShelton, WASHINGTON (USA)
You want a product that arrives ready-to-install, is long-lasting, and is backed by a strong product guarantee. We have your solution: Our sectionalizing cabinet ground sleeves are non-conductive, corrosion resistant and feature a high strength-to-weight ratio. The base lip around the perimeter offers extended product stability. The tapered body supports ...
Manufactured by:SG Power Products Pvt. Limited based inNoida, INDIA
It is Superior conductive material that solves your toughest grounding problems.It makes a conductivity layer contacting with the electrode closely.The natural features of strong absorbent & Moisture retention keep the soil moist fro a long time and reduce surrounding soil resistance.This Enhancing compound is environment friendly and does ...
Manufactured by:T & G Technology Co., Ltd. based inLinping District, CHINA
There are two specifications available for Top Hat Steel DIN Rail, DR 357.5E10 TS 35x7.5 DIN rail and DR 3515E15 NS 35x15 DIN rail. With the same structure and size, there is a distinction between a height of 7.5mm and 15mm. 15mm high din rails have better rigidity and larger load capacity, please choose according to the working ...
Manufactured by:VFC Group based inNorth Salt Lake, UTAH (USA)
Lynconite II is used as a backfill to surround the XIT systems during installation. It is based on natural clay formed by volcanic action. Specially processed to be very electrically conductive, Lynconite II enhances the performance of the grounding system. It is mixed with water (14gals./bag) until a slurry is formed (similar to pancake batter) then pumped or ...
Manufactured by:Ingesco based inBarcelona , SPAIN
The graphite electrode is suitable for soils with a high rate of corrosion or extreme temperatures.They can be installed as deep grounding electrodes and for the improvement of ground networks of pike or plate electrodes. ...
Manufactured by:Ningbo Zhenhai Beisuda Petrochemcial Equipment Co.,Ltd based inNingbo, CHINA
Production process: electroplating / continuous electroforming. Raw materials: Cold draw high quality mild steel. Product type: one pointed, one flat, two threads (requires with a striker, connector, drill). Thread production process: mainly consists of two processes: turning before electroplating and rolling after electroplating. Tensile strength: 450-600MPA. Copper layer thickness: more than ...
Manufactured by:GWF AG based inLucerne, SWITZERLAND
The time-reverse acoustic principle enables a new level of measuring repeatability unaffected by flow perturbations, electromagnetic or grounding interference and water ...
Manufactured by:CETCO based inNew York, NEW YORK (USA)
GROUNDING GROUT is a high-solids, single-component bentonite grout. GROUNDING GROUT is specially formulated to provide a conductive seal around grounding rods. When used to seal drilled boreholes in which vertical grounding rods are placed, GROUNDING GROUT increases the grounding ...
Manufactured by:SG Power Products Pvt. Limited based inNoida, INDIA
SG (Safe Ground) Ground Enhancing Compound - GEM PLUS - is a Superior conductive material that caters to toughest grounding problems. It makes a conductuctive. layer around the electrode tightly. SG Back Fill compound is hygroscopic in nature and have best moisture retaining qualities. NO need to add water over time. Hence makes ...
Manufactured by:Dontech based inDoylestown, PENNSYLVANIA (USA)
Dontech has an extensive array of high energy vacuum deposition systems for applying thin film transparent conductive coatings to different types of glass, plastic, and crystalline substrates. Processes include DC and AC magnetron sputtering and ion-enhanced (IAD) e-beam evaporation. Dontech’s conductive coatings are used in applications ranging from the very demanding requirements of an ...
Manufactured by:M.A.E. Srl based inFrosolone (IS), ITALY
Drilling Tip 18 mm diameter, installed on a stainless steel bar of 1,25 mt length. Used to drill survey hole where probe for the measure of soils thermal conductivity is ...
Manufactured by:The Local Exhaust & Ventilation Company Inc. (Lev-Co) based inPort Perry, ONTARIO (CANADA)
This hose is ideally suited for conveying oil mist and abrasive dust from machining processes. For applications where a flexible, chemical, and abrasion-resistant hose is ...
Manufactured by:SG Power Products Pvt. Limited based inNoida, INDIA
These rods are also known as copper coated ground rod, as a leading copper coated earth rod manufacturer our copper coated grounding rod are made from low carbon steel & are molecularly coated with 99.9% pure electrolytic copper. This conductor has high strength, excellent elasticity as steel but also good conductivity and corrosion ...