Refine by
Human Vibration Equipment & Supplies
51 equipment items found
Manufactured by:Larson Davis, a division of PCB Piezotronics based inDepew, NEW YORK (USA)
The HVM200 is a small rugged vibration meter with built in Wi-Fi that can be used to measure hand-arm, whole body and general vibration. It includes the metrics and frequency weightings needed to measure human vibration. This 3 channel meter meets the requirements of ISO 8041:2005 and it is designed to measure per ISO 2631-1, 2 ...
Manufactured by:Hottinger Bruel & Kjær A/S based inVirum, DENMARK
An easy-to-use, rugged and portable human vibration analyzer, designed primarily for Health and Safety at Work applications, specifically risk assessment according to EU Directive 2002/44/EC. It measures exposure to hand-arm and whole-body vibration, and complies with the technical requirements of ISO 8041:2005. Type 4447 measures and displays ...
Manufactured by:Svantek Sp. z o.o. based inWarsaw, POLAND
SV 106D is a compact, high-precision human vibration meter and analyser that supports simultaneous six-channel measurements using two triaxial accelerometers. The instrument complies fully with ISO 8041-1:2017 and is ideal for evaluating hand-arm and whole-body vibration in accordance with ISO 5349, ISO 2631, and the European Directive ...
Manufactured by:DEWESoft based inTrbovlje, SLOVENIA
Human body vibration module measures the effect of vibration on the human. The extracted parameters allow the judgment of risk of injuries for workers, exposed to vibration. Whole-body and hand-arm measurement are supported according to all relevant international ...
Manufactured by:Svantek Sp. z o.o. based inWarsaw, POLAND
SV 103 is a wearable vibration meter that enables accurate measurement of hand-arm exposure throughout a full working day, in compliance with ISO 8041-2:2021 and ISO 5349. The built-in force detection sensor automatically detects hand contact with the vibrating surface, allowing the instrument to calculate actual daily exposure (A(8)) with high precision. This significantly reduces ...
Manufactured by:Cirrus Research plc based inHunmanby, UNITED KINGDOM
The Revo Whole-Body Vibration Meter is a powerful meter that gives you all of the data you need to complete your vibration assessments while complying with the Control of Vibration at Work Regulations 2005 and ISO ...
Manufactured by:Cirrus Research plc based inHunmanby, UNITED KINGDOM
The Revo Hand-Arm Vibration Meter is a powerful human vibration meter that gives you all of the data you need to complete your vibration assessments while complying with the Control of Vibration at Work Regulations 2005 and ISO ...
Manufactured by:Eco-Tech based inWarszawa, POLAND
Vibration Calibrator Type WDS-3 is designed for calibration of vibration meters equipped with whole body (seat pads) and hand-arm vibration transducers. The instrument generates sinusoidal vibration of nominal acceleration 1 m/s² RMS at frequency 16 Hz and acceleration 10 m/s² RMS at frequency 80 Hz or 160 Hz. The Type WDS-3 enables calibration of triaxial whole body transducers in 3 ...
Manufactured by:Eco-Tech based inWarszawa, POLAND
Vibration Calibrator Type WDS-2 is designed for calibration of vibration meters equipped with whole body vibration transducers (seat pads). The instrument generates sinusoidal vibration of nominal acceleration 1 m/s² RMS at frequency 16 Hz. The Type WDS-2 enables calibration of triaxial whole body transducers in 3 axes without removing its rubber cover. The calibrator fulfills requirements ...
Manufactured by:Larson Davis, a division of PCB Piezotronics based inDepew, NEW YORK (USA)
Larson Davis offers a selected range of measurement accelerometers optimized for use with the HVM200 Human Vibration Monitor. They cover the complete range of applications including Hand-arm, Whole-body, and Glove Transmissibility ...
Manufactured by:Manfred Weber Metra MeB- und Frequenztechnik in Radebeul e.K. based inRadebeul, GERMANY
Quick and simple calibration and fault detection of sensors and measuring chains for acceleration, velocity and displacement . Load independent vibration magnitude. Vibration magnitude of 10 m/s² (VC20) or selectable in 5 steps from 1 to 20 m/s² (VC21). Quartz stabilized vibration frequency of 159.2 Hz (VC20) or selectable in 7 steps ...
Manufactured by:Instrumex based inMumbai, INDIA
Human Vibration Meter with Hand-Arm and Whole-Body Sensor manufacturer, supplier, and exporter, Mumbai-India. Designed for the Health & Safety monitoring of Hand Arm Vibration. Filter selection is fixed using the Wh filter for Hand Arm operation making the Excieo usability straightforward. ISO8041:1990 type 1 and latest draft of ISO8041 ...
Manufactured by:Svantek Sp. z o.o. based inWarsaw, POLAND
SV 150 is a tri-axial accelerometer designed to be used with the SV 106 human vibration analyser to provide a dedicated instrument for measurements according to ISO 5349-2. The accelerometer can easily be attached to the handle of the vibrating tool being measured. The sensor's TEDS memory stores information about calibration factor limiting the ...
Manufactured by:Sonopan Sp. z o.o. based inBialystok, POLAND
The DVA-100 set is designed for human body vibration measurement ...
Manufactured by:Sensidyne, LP based inSt. Petersburg, FLORIDA (USA)
SV 106 is a new six-channel human vibration meter and analyzer. Instrument meets ISO 8041:2005 standard and it is an ideal choice for measurements according to ISO 2631-1,2&5 and ISO 5349. This revolutionary, pocket-size instrument enables simultaneous measurements with two triaxial accelerometers (e.g. both-hands vibration or triaxial seat ...
Manufactured by:Manfred Weber Metra MeB- und Frequenztechnik in Radebeul e.K. based inRadebeul, GERMANY
Detachable clamping device for the dynamic calibration of non-contact displacement sensors (Eddy current probes) at 159.2 Hz with thread adapters for all common sensor models. Clock output for the synchronization of frequency-selective measuring systems. Load independent vibration magnitude. Vibration magnitude selectable in 5 steps from 1 to 20 m/s². Quartz ...
by:Audioscan, a Division of Etymonic Design Incorporated based inDorchester, ONTARIO (CANADA)
This system addresses traditional verification challenges by employing a sophisticated Speechmap environment and DSL-BCD targets to objectively measure device performance. It utilizes Force Level with vibrational transforms to simulate the mechanical impedance of the human head, translating vibrations into electrical signals for precise analysis. ...
Manufactured by:Nantong R&X Energy Technology Co.,Ltd. based inNantong, CHINA
Low start up speed; high wind energy utilization; beautiful appearance; low vibration. Human friendly design, easy installation, maintenance and repair. Precise injection molding blades together with the optimized design of aerodynamic contour and structure, the blades have such advantages: high utilization of wind energy which contributes to the annual energy ...
Manufactured by:RION Co., Ltd. based inTokyo, JAPAN
The VM-54 is a vibration meter capable of measuring acceleration in three axes X, Y, Z. Two measurement modes are available, namely instantaneous value and maximum value hold. AC outputs for X, Y, Z allow connection of a general-application data recorder or a DAT recorder. The optional Marine Vibration Card VX-54WS as well as other option program cards for ...
Manufactured by:Hottinger Bruel & Kjær A/S based inVirum, DENMARK
Measure unattended vibration related to structural damage, sensitive machinery disturbance and human response with our Vibration Monitoring Terminal Type 3680. The robust Vibration Monitoring Terminal provides real-time data that enables users to prevent harm to buildings, ensure regulatory compliance and meet social license ...