Refine by
Applications
- Channel Networks solutions for Seepage Water
- Channel Networks - Fix Installation Measurements for no shutting down the flow areas
- Channel networks solutions for replacement of measurement with inverted syphon sector
- Channel Networks - Fix Installation Measurements for hybrid flow measurement in main collector sector
- Channel Networks - Fix Installation Measurements for Flow Measurement In Pipe That Could Not Be Shut Down
- Industrial wastewater solutions for seafood processing sector
- Industrial process solutions for parks & recreation sector
- Material Handling Equipment, Batch Plants and Mixers for Mineral Processing
- Horizontal Shaft Mixer for Refractory Industry
- Horizontal Shaft Mixer for Biomass Power
- Wastewater Treatment Plant - Discharge Area solutions for Partial Discharge Section Flow Measurement
- Detection of Nighttime Volume solution for Water Supply - Drinking Water
- Volume Measurement Overhead Tank solution for Water Supply - Drinking Water
- Turbine Intake Flow Measurement solutions for Industry - Power Plants
- Municipal wastewater solutions for airports sector
- Municipal wastewater solutions for digestion & biogas sector
- Municipal wastewater solutions for septage & grease receiving sector
- Industrial wastewater solutions for food and beverage processing sector
- Industrial process solutions for marine industry
- Industrial process solutions for oil, gas & energy industry
- Equipment for Mining
- Pumps and Dredging Systems for Dredging
- Pumps and Dredging Systems for Industrial Dredging
- Pumps and Dredging Systems for Mining Dredging
- Pumps and Dredging Systems for Offshore dredging
- Municipal wastewater solutions for biological treatment industry
- Cooling Water Flow Measurement solutions for Industry - Power Plants
- Discharge measurement for hydrology research
- Hydrological and environmental monitoring Systems for Groundwater monitoring industry
- Channel Networks - Stormwater Treatment Facilities solutions for Discharge Control of Stormwater Overflow Tank
- Channel Networks - Stormwater Treatment Facilities for throttle monitoring via GPRS sector
- Stormwater Treatment solutions for GPRS in customer network sector
- Flowing Waters - Flood Protection solutions for Flow Measurement Protected Area Drainage
- Flowing Waters - Special Constructions solutions for Flow Measurement on Sluice
- Cooling Water Tap solutions for Industry - Chemical Industry
- Flow Measurement in 8 Cooling Water Intakes solution for Industry - Power Plants
Hydropower Equipment Supplied In Canada
522 equipment items found
Manufactured by:John Cockerill Group based inSeraing, BELGIUM
John Cockerill Balteau carries out the installation of hydraulic systems for the production of electrical energy (turbines). From the study of the process to its implementation, John Cockerill Balteau's engineers are able to define the technologies which will guarantee flawless control of investment, maintenance and production ...
Manufactured by:Sulzer Ltd. based inWinterthur, SWITZERLAND
Sulzer's new generation hydro-powered water drill has proven to be more reliable, cost-effective and environmentally friendly than the previous generation of water drill. It fulfills DME requirements and has unlocked the full potential of hydro-powered ...
Manufactured by:Coanda Water Intakes - ADENCO part of ADEN-GROUP Company based inKamloops, BRITISH COLUMBIA (CANADA)
The most popular and effective way for the Coanda Intake Screen, also called hydropower screen, is using it for the Hydroelectric Plants – Hydropower energy. Coanda Water Screen prevents harmful materials in the intake process and provides clean water. Thus, turbine blades in hydropower plants can operate for longer without being damaged. ...
Manufactured by:Noardling B.V. based inSneek, NETHERLANDS
Flowing water is a relentless, never ending source of power for pure, clean renewable energy. All you need to benefit from this natural resource is a Landustrie hydropower screw ...
Manufactured by:Noardling B.V. based inSneek, NETHERLANDS
The new range of the Landustrie screw pump covers the hydropower screw turbines. An efficient use of water power is already achieved at a level difference of 1 meter and a capacity of 500 l/sec. The largest capacity and level difference for hydropower screws is as much as 15000 l/sec. at 10 ...
Manufactured by:Kuhn Technische Anlagen GmbH based inHöpfingen, GERMANY
A millennia-old method of pumping river water or sewage has conquered the world of hydro power generation. The "Archimedean screw" - also known as the "water screw" - is thousands of years old. It is used to pump large volumes of water at relatively low heads and is extremely reliable and durable so application operators are fully satisfied. Systematic consideration of how to utilize all the ...
Manufactured by:J.M. Power Aggregates Limited based inArnprior, ONTARIO (CANADA)
In many jurisdictions, the use of coal cinders, bottom ash and clinkers has been banned. Natural Cinders is a new, proven STOPLEAK solution that quickly seals gates & stop logs and is environmentally friendly. To ensure optimum, repeatable performance, we have created a custom blend of this naturally occurring material that outperforms other ...
Manufactured by:REEL COH Inc. based inBoisbriand, QUEBEC (CANADA)
REEL COH is specialized in the design, engineering, manufacturing, installation and start-up of lifting equipment for hydropower projects such as Intake Gate Hoists. Intake Gate Hoist : A high capacity fixed hoist mounted on an autonomous structure upstream of the turbine penstock used to raise or lower the intake gate. The intake gate hoist is normally dedicated to one gate and ...
Manufactured by:aemco based inBoisbriand, QUEBEC (CANADA)
A high capacity fixed hoist mounted on an autonomous structure serving the spillway of a water retention construction adjacent or remote from a power house. The spillway gate hoist is dedicated to one gate and is permanently attached to it, thus operating in a cold and damp ...
Manufactured by:aemco based inBoisbriand, QUEBEC (CANADA)
COH specializes in the design, fabrication and installation of Spiral Drum Link and Roller Chain Hoists. Spiral Drum Link and Roller Chain Hoists are typically used with Tainter or Radial, Pie shaped gates. Spiral Drum Link and Roller Chain Hoists can be used on spillways as control or emergency gates and are often mobile so that Spiral Drum Link and Roller Chain Hoists can be used for servicing ...
Manufactured by:REEL COH Inc. based inBoisbriand, QUEBEC (CANADA)
Powerhouse cranes : a high capacity top running double girder electric overhead crane used in the operation of hydropower generating stations during the construction phase and throughout the economic life of the installation. In large powerhouses, where the heaviest components to be handled can range from 100 to 1 000 tons, a single crane or a combination of 2 cranes operating ...
Manufactured by:aemco based inBoisbriand, QUEBEC (CANADA)
Powerhouse cranes A high capacity top running double girder electric overhead crane used in the operation of hydropower generating stations during the construction phase and throughout the economic life of the installation. In large powerhouses, where the heaviest components to be handled can range from 100 to 1 000 tons, a single crane or a combination of 2 cranes operating ...
Manufactured by:aemco based inBoisbriand, QUEBEC (CANADA)
A high capacity fixed hoist mounted on an autonomous structure upstream of the turbine penstock used to raise or lower the intake gate. The intake gate hoist is normally dedicated to one gate and is permanently attached to it, thus operating in a cold and damp ...
Manufactured by:aemco based inBoisbriand, QUEBEC (CANADA)
A single or double track monorail hoisting trolley used to handle upstream or downstream maintenance stop logs to isolate gates for service purposes. The stop log hoist is normally provided with a submersible stop log lifting beam equipped with automatic latching hooks and a release mechanism operable from the ...
Manufactured by:REEL COH Inc. based inBoisbriand, QUEBEC (CANADA)
REEL COH is specialized in the design, engineering, manufacturing, installation and start-up of lifting equipment for hydropower projects such as Spillway Gate Hoist. Spillway Gate Hoist : a high capacity fixed hoist mounted on an autonomous structure serving the spillway of a water retention construction adjacent or remote from a powerhouse. The spillway gate hoist is dedicated ...
Manufactured by:aemco based inBoisbriand, QUEBEC (CANADA)
COH specializes in the design, fabrication and installation of Rack & Pinion Gate Lifters. Rack and pinion gate or stop log lifters are used when a down pressure has to be applied on a device traveling in guides. The down pressure can be required because the device being pushed down is lighter than the opposing hydraulic forces, this situation might appear when using wood stop logs, when the ...
Manufactured by:REEL COH Inc. based inBoisbriand, QUEBEC (CANADA)
REEL COH specializes in the design, fabrication and installation of Draft Tube Monorails, Cranes or Gantries. Draft Tube Monorails, Cranes or Gantries : the draft tube overhead handling equipment can be of a wide range of capacity depending on the year of construction of the powerhouse and also depending if gates or stop logs are used as draft tube opening and closing doors. The draft tube ...
Manufactured by:REEL COH Inc. based inBoisbriand, QUEBEC (CANADA)
REEL COH specializes in the design, fabrication and installation of Gates, Stop Logs, Trash Racks & Embedded Parts. Typically gates, stop logs, trash racks & embedded parts are used in the flow of water going through the intake or spillway ...
Manufactured by:aemco based inBoisbriand, QUEBEC (CANADA)
COH specializes in the design, fabrication and installation of Gantries and Monorails for Stop Logs and Spillway Gates.Gantries and Monorails for Stop Logs are typically used for the handling of stop logs serving for protection against water flow upstream of gates. Gantries and Monorails for Stop Logs can also be used as draft tube protection. Stop log gantries or monorails service a whole ...
Manufactured by:aemco based inBoisbriand, QUEBEC (CANADA)
Monorail or Crane : The draft tube overhead handling equipment can be of a wide range of capacity depending on the year of construction of the power house and also depending if gates or stop logs are used as draft tube opening and closing doors. The draft tube overhead handling equipment can be required in an overhead crane configuration if it operates inside the power house or in a monorail or ...