Refine by
Inertial Sensor Equipment & Supplies
48 equipment items found
by:OrthAlign Inc. based inAliso Viejo, CALIFORNIA (USA)
Intuitive, handheld navigation for accurate component positioning. Designed to improve outcomes through efficient and simple ...
Manufactured by:CSS Electronics based inAabyhoej, DENMARK
The CANmod.gps by CSS Electronics is an advanced GPS-to-CAN module featuring a u-blox NEO-M8U GNSS/IMU chip, designed for seamless integration with any high speed CAN bus system. This device outputs GNSS position and 3D inertial data while delivering continuous positioning through its sensor fusion technology, even in the absence of a GNSS signal, thanks to its ...
Manufactured by:SBG Systems based inIle-de-France, FRANCE
Ellipse-E is a versatile miniature Inertial Navigation Sensor that connects to external GNSS receiver to provide navigation data, and other sensors such as DVL or odometer. It’s best suited in case of specific GNSS integration or when wide interfacing capability is required It provides roll, pitch, magnetic or GNSS heading, heave, and ...
Manufactured by:TOKYO KEIKI INC. based inTokyo, JAPAN
The Position and Attitude Sensor VSAS-T1G by TOKYO KEIKI is a sophisticated device designed for inertial navigation applications. This sensor leverages advanced technology to deliver accurate positioning and attitude data, critical for navigation and stabilization tasks. It integrates a vibrating silicon-gyro, enhancing the ...
Manufactured by:Silicon Sensing Systems Limited based inPlymouth, UNITED KINGDOM
An affordable non-ITAR MEMS IMU alternative to 'FOG-Grade' IMUs for use in exacting motion sensing applications. The latest of a family of High Performance IMUs (HPIMUs), DMU41 is another ground-breaking, non-ITAR, MEMS IMU for use in applications ranging from unmanned vehicle navigation to surveying and mapping. This latest version offers lower power, smaller size and lighter weight compared ...
Manufactured by:Ericco Inertial Technology based inXi 'an, CHINA
ER-FOG-851 Low Cost Fiber Optic Gyroscope (FOG) is specially designed according to the concept of traditional fiber optic gyroscope and adopts mature fiber optic gyroscope manufacturing technology. Our FOG gyroscopes have the characteristics of small volume, light weight, low power consumption, fast start-up, simple operation, convenient to use, which are widely used in INS, IMU, positioning ...
Manufactured by:Aceinna, Inc. based inAndover, MASSACHUSETTS (USA)
MTLT305D Dynamic Tilt Sensor Module includes both CAN 2.0 (J1939) and RS232 Interfaces. It combines accelerometers, gyroscopes and a temperature sensor with advanced calibration and correction algorithms to provide accurate 3D acceleration, 3D rate and Pitch and Roll measurement in dynamic, moving vehicle applications. The MTLT305D uses advanced sensor fusion (Extended Kalman Filtering) and ...
Manufactured by:Gemac Chemnitz GmbH based inChemnitz, GERMANY
The GEMAC Motus® series XC is a 2-axis tilt sensor and a 6-axis inertial measuring unit consisting of an acceleration and gyro sensor. It allows the measurement of acceleration, rotation rate, and tilt in one device. It is characterized by high accuracy, which is achieved by a factory ...
Manufactured by:Septentrio based inLeuven, BELGIUM
A GNSS + INS (Inertial Navigation System) provides centimeter-level global positioning together with attitude angles (heading, roll and pitch) showing the object’s 3D orientation and movement. This system is specifically designed to be robust in challenging environments and provides continuous positioning even during short GNSS outages. To enable inertial functionality a GNSS receiver is ...
Manufactured by:Sensor Medica srl based inGuidonia Montecelio, ROMANIA
Movit Gait is the ideal tool for clinicians and specialists interested in objectively monitoring and quantifying the patient's physical state and evaluating the effectiveness of a rehabilitation program. Thanks to the network of inertial sensors worn by the patient, it provides a complete and accurate movement ...
Manufactured by:Physical Logic based inPetah Tikva, ISRAEL
MAXL-OL-2002 is a state-of-the-art inertial sensor based on a unique MEMS device, designed to provide high stability and low noise ...
Manufactured by:Physical Logic based inPetah Tikva, ISRAEL
MAXL-OL-2005 is a state-of-the-art inertial sensor based on a unique MEMS device, designed to provide high stability and low noise ...
Manufactured by:Aceinna, Inc. based inAndover, MASSACHUSETTS (USA)
The INS1000 is a state-of-the-art, high performance integrated navigation system with built-in GNSS and inertial sensors. It offers dual frequency RTK and tight coupling between GNSS and inertial sensors, to provide cm-level accuracy, enhanced reliability, and superior performance. The Automotive Dead Reckoning (ADR) solution ...
Manufactured by:Northrop Grumman LITEF GmbH based inFreiburg, GERMANY
The B-290 accelerometer based on MEMS technology (MEMS = Micro Electro Mechanical System) was developed for the requirements of land, sea and air applications. These inertial sensors are available with various performance parameters and they provide our customers with the scope to develop their own inertial system solutions. The B-290 outputs ...
Manufactured by:Inertial Labs, a VIAVI Solutions Company based in20129, VIRGINIA (USA)
The Inertial Labs MEMS TAA-308, TAA-315, and TAA-340 are revolutionary, compact, self-contained, strap-down, Navigation-grade Accelerometers that measure linear accelerations with high precision due to their unique design and developed by Inertial Labs over the last twenty years of significant knowledge and techniques in calibrations of inertial ...
Manufactured by:Northrop Grumman LITEF GmbH based inFreiburg, GERMANY
LITEF FOG IMUS units comprise three gyro axes for rotational measurement, three accelerometer axes for the measurement of linear acceleration, a processor card, a power unit and a housing with connectors and other mechanical components. Other configurations are possible and can be developed easily on the basis of the modular inertial sensor concept. The advantage ...
Manufactured by:Inertial Labs, a VIAVI Solutions Company based in20129, VIRGINIA (USA)
Developed by Inertial Labs, the Optically-enhanced Attitude and Heading Reference System – OptoAHRSTM-II is a small size, lower power consumption, precise North-finding and North-keeping system. It combines technologies of inertial sensors with optical image tracking resulting in a robust and reliable 3DOF orientation module capable of ...
Manufactured by:Gladiator Technologies based inSnoqualmie, WASHINGTON (USA)
The LandMark 007 IMU is engineered for high dynamic environments, combining low-noise and high-range inertial sensors with VELOX technology to deliver filtered digital output. This six-axis IMU provides a rate range of 2000°/s and an acceleration range of up to 98g, ensuring precision in demanding applications. It achieves data rates up to 10 kHz with a message ...
Manufactured by:Gladiator Technologies based inSnoqualmie, WASHINGTON (USA)
The LandMark™ 005 IMU by Gladiator Technologies is a precision six-axis inertial measurement unit designed for high dynamic applications. It integrates low noise, high range inertial sensors with their proprietary VELOX™ high-speed processing technology, which ensures optimal performance without compromising on inertial data ...
Manufactured by:Inertial Labs, a VIAVI Solutions Company based in20129, VIRGINIA (USA)
The Inertial Labs Optically enhanced Weapon Orientation Module - OptoWOM -II, is Inertial Labs' second generation of its Optically Enhanced Weapon Orientation Module. OptoWOM™-II combines technologies of inertial sensors with optical image tracking resulting in a robust and reliable 3DOF orientation module capable of ...