Refine by
Inhalable Particle Equipment & Supplies
35 equipment items found
Manufactured by:Tri-Mer Air Pollution Control Systems based inOwosso, MICHIGAN (USA)
Particulate emissions are tiny particles and droplets in the air that are made up of hundreds of different chemicals. Most are formed in the atmosphere as a result of chemical emissions from power plants, industries and automobiles. To reduce PM pollution, the EPA regulates inhalable particles smaller than 10 ...
Manufactured by:Brechtel based inHayward, CALIFORNIA (USA)
Most particles in the atmosphere take up water when exposed to increasing relative humidity – this often explains the poor visibility during the early morning hours when the relative humidity is high and particles have swollen in size and more effectively scatter solar radiation. When we inhale particles they also grow into ...
Manufactured by:HI-Q Environmental Products Company, Inc. based inSan Diego, CALIFORNIA (USA)
The EPA Clean Air Act of 1987 established a measuring standard to evaluate and monitor the health effects of thoracic inhaleable particles. The standard was set that in order for an environment to be healthy, in terms of these particles, it must have a concentration of less than 150 mg/m3 of particles with aerodynamic diameters ...
Manufactured by:Tobra Medical Inc. based inWake Forest, NORTH CAROLINA (USA)
Surgical masks provide protection against large droplets, splashes or sprays of bodily or hazardous fluids. They do not provide the wearer with reliable protection from inhaling smaller airborne particles and are not considered respiratory ...
Manufactured by:InsightAir Europe based inSofia, BULGARIA
InsightAir’s industrial air quality sensor measures temperature, relative humidity, CO2, VOC, PM2.5 including Suspended Particulate Matter (PM100). PM100 is related to the total inhalable fraction of particles (coarse dust) in the air, which is regulated by the authorities in European countries. The sensor is connected through a local WIFI network or via ...
Manufactured by:Dustraction Ltd based inOadby, UNITED KINGDOM
The working area of the bench is 2000mm x 1100mm, with a working height of 900mm. Air is drawn downwards through the perforated surface, which reduces fine dust particles being inhaled by the operator. The air is then filtered and passed through a fan, before being discharged at low level back to the workshop. ...
Manufactured by:TCR-Tecora based inCogliate (MB), ITALY
MDI Metered Dose Inhalers; DPI Dry Powder Inhaler. Aerodynamic particle sizing. The design concept of the Andersen Cascade Impactor evolves from the following information: The human respiratory system tract is an aerodynamic classifying system for airborne particles. A sampling device can be used as a substitute for the ...
Manufactured by:TSI Incorporated based inShoreview, MINNESOTA (USA)
The RESPICON™ Particle Sampler is a lightweight, compact device for measuring human exposure to airborne particle concentrations in the workplace. The RESPICON uses a single sampling head to model the human respiratory tract and simultaneously determine the three most critical particle fractions: inhalable, thoracic, and ...
Manufactured by:Westech Scientific Instruments (Westech) based inUpper Stondon, UNITED KINGDOM
The Westech 7 (W7) is Westech’s version of the Next Generation Impactor (NGI), a Seven Stage Cascade Impactor with Micro-Orifice Collector conforming to all the critical dimensions defined for USP Apparatus 5 & 6 and EP Apparatus E. The W7 is a multi-jet impactor with 8 removable collection cups and a convenient single tray design with operating flowrates between 15 and 100 ...
Manufactured by:Dosimetrics, Part of Mirion Technologis (AWST) GmbH based inMünchen, GERMANY
Optically stimulated luminescence (OSL) dosimetry is a well-established method of reporting individual doses. Our new OSL dosimeter defines a milestone in monitoring the Personal Dose Equivalents Hp(10) and Hp(0.07). Using state-of-the-art methods, our new OSL dosimeter covers the full energy range from 16 keV to more than 10 MeV. For this energy range, it is exceptional in its energy dependency ...
Manufactured by:Inert Corporation based inAmesbury, MASSACHUSETTS (USA)
The PowderShield 3D Printing Depowdering System by Inert provides a specialized solution for safely removing excess powders from additive manufacturing components. Designed as a customizable enclosure, it ensures an inert environment with a hermetic seal to prevent powder inhalation and static buildup, critical for handling metal powders like titanium. It incorporates an argon management system ...
Manufactured by:Atos Medical, part of Coloplast A/S based inMalmö, GERMANY
An HME that is also an effective bacteria, virus and dust filter. Combining an HME with a filter, provides more than humidification.?It also provides very effective filtration, for extra ...
Manufactured by:Westech Scientific Instruments (Westech) based inUpper Stondon, UNITED KINGDOM
Westech 7 is the newest innovation in impactor sampling technology, suitable for dry powder inhaler testing, metered dose inhaler testing, nebulizer testing & nasal spray testing. The W7 is a Seven Stage Cascade Impactor with Micro-Orifice Collector conforming to all the critical dimensions defined for USP Apparatus 5 & 6 and EP Apparatus E. The W7 is a multi-jet impactor with 8 removable ...
Manufactured by:Acorda Therapeutics, Inc. based inPearl River, NEW YORK (USA)
ARCUS® is an innovative technology platform that transforms medicines into light, dry powders. These powders are designed to deliver high doses of medication through an inhalation device that is activated by a patient’s own ...
Manufactured by:EHC Teknik AB based inPartille, SWEDEN
We have developed diesel particulate filters (DPF) that can handle the conditions that mining vehicles are used in. Without these filters, diesel particulate matter can spread through underground mines. It pollutes the air and poses serious health risks. ...
Manufactured by:Noruco S.L. based inSevilla, SPAIN
Self- filtering mask in accordance with EU regulation 2016/425 regarding personal protective equipment. Composition: - Product tested and approved in accordance with the UNE-EN 149:2001+A1:2009 standard. ...
Manufactured by:Livermore Instruments Inc. based inOakland, CALIFORNIA (USA)
The Livermore Instruments Aerodynamic Focusing Lens Interface draws particle laden air from the environment and delivers the particles into vacuum as a tight particle beam. A result of years of research at Lawrence Livermore National Laboratory and the subject of two patents*, the interface focuses far larger particles than any previous design and focuses a broad range of particle sizes. The ...
Manufactured by:Zefon International - Antylia Scientific based inOcala, FLORIDA (USA)
The Zefon Inhalable Dust sampler is a reusable filter cassette with a sampling head designed to measure the worker's exposure to inhalable particulates and respirable dust. When sampling at the recommended flow rate of 2 LPM, it collects a particle size distribution that includes particles of 100 micron and smaller. This meets ...
Manufactured by:Cubic Sensor and Instrument Co., Ltd based inWuhan, CHINA
PM5000S optical particle counter is based on laser scattering technology, which can accurately detect and calculate the number of different size suspended particles in the air per unit volume. The built-in intelligent identification for different air/dust source that could automatically identify dust source and ambient air to give accurate measurement. It can simultaneously output the number of ...
Manufactured by:MedChemExpress LLC (MCE) based inMonmouth Junction, NEW JERSEY (USA)
Capreomycin is a macrocyclic peptide antibiotic. Capreomycin can be used for anti-multidrug-resistant-tuberculosis research. Capreomycin can inhibit phenylalanine synthesis in in mycobacterial ribosomes ...