Refine by
Applications
- Water Treatment Solutions for Waste Water Industry
- Water Treatment Solutions for Power Generation Industry
- Water Treatment Solutions for Refineries Industry
- Water Treatment Solutions for Industrial Processes Sector
- Water treatment solutions for Chemical Plants Industry
- Water treatment solutions for Drinking Water Industry
- Air pollution, emission and process monitoring systems for incineration
Injectable Activated Equipment & Supplies
77 equipment items found
Manufactured by:Tri-Mer Air Pollution Control Systems based inOwosso, MICHIGAN (USA)
SorbSaver is a simple, cost-effective retrofit for dry sorbent injection / activated carbon injection systems. Dry sorbent injection is widely used to reduce a range of pollutants. While these systems have a low capital cost when compared to alternative technologies, continued operation has shown the lance-based method of ...
Manufactured by:C.E.R.E.S. Corporation based inLos Angeles, CALIFORNIA (USA)
C.E.R.E.S. offers high quality and high surface area powder activated carbon (iPAC) for remediation application in soil and groundwater by adsorption of organic contaminants, PFOS /PFOA, and some heavy metals (e.g. Hg) or in combination with other chemical reductive and biotic reduction reagents. Adsorption can significantly retard contaminant migration and decrease dissolved phase concentrations ...
Manufactured by:C.E.R.E.S. Corporation based inLos Angeles, CALIFORNIA (USA)
C.E.R.E.S. offers high quality and high surface (e.g. 1,000 m2/g) area powder activated carbon (iPAC) for remediation application in soil and groundwater by adsorption of organic contaminants, PFOS /PFOA (iPAC-PF), and some heavy metals (e.g. Hg) or in combination with other chemical reductive and biotic reduction reagents. ...
Manufactured by:LDX Solutions based inKennesaw, GEORGIA (US) (USA)
An Activated Carbon Injection (ACI) System is an engineered system from which powdered activated carbon (PAC) is pneumatically injected from a storage silo into the flue gas ductwork. The PAC adsorbs the mercury from the flue gas and is then collected with the fly ash in the plant’s particulate collection device. ...
Manufactured by:Amerair Industries, LLC based inPacific, MISSOURI (USA)
Amerair Industries presents its line of standardized Activated Carbon (ACI) injection systems for Mercury, Dioxin/Furan emissions compliance. All of Amerair’s systems are offered with full emissions performance and reagent utilization guarantees. Amerair’s staff of experts have experience in applications from Industrial and Utility Boiler MACT ...
Manufactured by:Southern Environmental, Inc. (SEI) based inPensacola, FLORIDA (USA)
Activated Carbon Injection (ACI) Systems and Dry Sorbent Injection (DSI) Systems have been in use for many decades and SEI has been supplying such systems in the industrial markets for 20 years. The use of these systems for Mercury and Acid Gas control has a low capital cost and proven reliability. ...
Premium
Manufactured by:ENVEA based inPoissy, FRANCE
Perfectly adapted for control and regulation of reagent in flue gas treatment and transport lines with very low material ...
Manufactured by:Jansens Aircraft Systems Controls Inc. (JASC) based inTempe, ARIZONA (USA)
This Water Injection Check Valve provides stable operation and can be operated continuously. It has high-temperature seals (Class 6 seal) that provide long-life sealing capability when the valve is not flowing water. Maintaining the Class 6 seal in this Water Injection Check Valve prevents the water system from evacuating during periods of inactivity. When the ...
Manufactured by:Sol-Millennium Medical Group based inSuwanee, GEORGIA (US) (USA)
Manually retractable needle safety syringe designed to aid in the prevention of needle stick injuries. The integral safety design keeps hands and fingers remain behind the needle during injection and activation of safety mechanism. After activation, the needle is secured into the barrel of the syringe and cannot be re-used. Bold and easy to read ...
Manufactured by:Gemtier Medical (Shanghai) Inc based inShanghai, CHINA
User Safety: Visible secure with 4 locks; Finger stays out of needle at all times. Easy Operation: One-Step activation; Same injection in technique. Patient Comfort: Activation after needle’s withdrawn avoids the patient’s concern. No negative impact to the ...
Manufactured by:Newtec Water Systems NV based inMechelen, BELGIUM
By means of its unique and compact electrolysis system, AqualityBox®, Newtec provides an ‘immediate help’ for disinfecting contaminated sanitary systems using shock disinfection. This is a short term injection of high concentrated active disinfectants to eradicate the biofilm and active bacteria. The entire water system in the ...
Manufactured by:Regenesis based inSan Clemente, CALIFORNIA (USA)
A patented colloidal activated carbon technology that adsorbs groundwater contaminants, including PFAS and CVOCs, directly in situ—immobilizing them and reducing risk.PlumeStop is an injectable colloidal activated carbon technology that rapidly captures and biodegrades a wide range of contaminants including PFAS and CVOCs. ...
Manufactured by:Duscon based inSeggiano di Pioltello (MI), ITALY
Our Mercury, Heavy Metals & Dioxins Control systems are based on activated carbon injection philosophy. These types of systems are in full accordance with the Best Available Technology (BAT) of activated carbon injection systems to control mercury, heavy metals and dioxins. Our multi-year experience with these types of ...
Manufactured by:Diamyd Medical AB based inStockholm, SWEDEN
Diamyd® is a suspension for injection containing the active pharmaceutical ingredient GAD65 mixed with the vaccine adjuvant Alhydrogel (alum). The human recombinant protein GAD65 is manufactured in insect cells in a well-controlled GMP process. The manufacturing process is developed for late phase clinical use. ...
Manufactured by:ULC Technologies, LLC, part of SPX Technologies based inHauppauge, NEW YORK (USA)
During routine gas utility operations, maintenance and construction activity, natural gas is often stranded in a section of pipe. The ULC DDC-125 Drawdown Compressor enables gas utilities to extract the stranded natural gas from the isolated section of main, compress it, and inject it back into the active system to support zero emissions goals ...
Manufactured by:Haier Biomedical based inQingdao, CHINA
The LN2 Backup System is engineered to ensure secure and efficient nitrogen backup for freezers, featuring an interlocked design that halts nitrogen injection if the freezer door is opened. This system is equipped with a protection circuit to prevent battery overcharging, enhancing its reliability. Its lightweight and portable design allows convenient installation atop freezers, making it highly ...
Manufactured by:Nte Process based inGorgonzola (MI), ITALY
For the dry injection of sorbents and activated carbon, NTE Process has patented Eco-Lance®: an innovative sorbent injection technology that uses a powerful air blower capable of blending sorbents and hot fumes containing pollutants with adequate ...
Manufactured by:Roncadelle Operations Srl based inCastel Mella (BS), ITALY
The SafeR Reverse Retractable Safety Syringe System is an innovative solution designed for pre-filled syringes. It offers a unique retractable needle mechanism that automatically activates after injection, ensuring complete needle coverage to prevent needle-stick injuries. The design leverages only four plastic components, making it both cost-effective and ...
Manufactured by:MedChemExpress LLC (MCE) based inMonmouth Junction, NEW JERSEY (USA)
AM103 (free acid) is a selective FLAP inhibitor that can block the first step of the LT pathway, which is 5-LO activation. AM103 (free acid) can inhibit the production of LTB4 and cysteinyl leukotrienes (CysLT). AM103 (free acid) has anti-inflammatory activity in a mouse model of chronic lung inflammation and can extend the survival time of mice ...
Manufactured by:NEST Biotechnology Co., Ltd. (NEST) based inWuxi, CHINA
The NEST prefilled automatic pen injector assembly mainly consists of three components: a PFS, a pen body assembly, and a trigger assembly. The drug is preloaded in the syringe, which is then inserted into the pen body. The pen body protects the PFS from accidental damage and features a large viewing window for easy observation of the drug solution. Once the pen body is assembled with the trigger ...