Refine by
Applications
- Consensus Cares Solution for Patients
- Packaging Solutions for Fulfillment
- Packaging Solutions for General Manufacturing
- Packaging Solutions for Produce and Flower
- Packaging Solutions for Food and Beverage
- Packaging Solutions for Window and Doors
- Hip and Knee Replacement Systems for Medical Education
- Hands-Free Robotic Device for Spinal Cord Injury
- Hands-Free Robotic Device for Spinal Cord Injury (Tetraplegia)
- Hands-Free Robotic Device for Traumatic Brain Stroke Injury
- Hands-Free Robotic Device for Physiotherapy
- Industrial Filters for Steel Plant
- Industrial Filters for Power Generation
Leg Length Equipment & Supplies
122 equipment items found
Manufactured by:Merete Technologies, Inc. (MTI) based inOakbrook Terrace, ILLINOIS (USA)
The trapezoidal design of the PediatrOS™ RigidTack™ staple is closely aligned to the anatomy of the femur and tibia. Cannulated legs allow accurate placement using K-wires. Low fluoroscopy times are another advantage. The PediatrOS™ RigidTack™ is the only growth arrest implant on the market specifically developed and approved for correcting ...
Premium
Distributed by:Interstate Products, Inc. based inSarasota, FLORIDA (USA)
Drum Pourer - Morse 82A - Manual Lift - 800 lbs capacity - Morse Drum Palletizer/Pourer. Morse Drum Palletizers allow you to move drums on and off shipping pallets, spill containment pallets, and drum dollies. The V-shaped base is designed so you can raise and place a drum at the corners of a pallet. Straddle a pallet up to 41" wide and 7" tall. Manually tilt drum to pour at up to 26" high ...
Manufactured by:OPED Medical Inc. based inBraselton, GEORGIA (US) (USA)
EVENup ® is an orthotic shoe lift that is used for compensating temporary leg length discrepancy. EVENup ® was developed by two Podiatrists in Ft Myers, Florida, after hearing complaints from patients wearing a fracture boot. The patients were experiencing pain in the back, hip and/or knee due to uneven gait when walking with an orthotic walking ...
Manufactured by:Consensus Orthopedics based inEl Dorado Hills, CALIFORNIA (USA)
The TaperSet Hip System combines design enhancements that restore leg length, stability, offset and ROM precisely and reliably. The TaperSet Hip System features a reduced distal profile that addresses proximal/distal ...
by:OrthAlign Inc. based inAliso Viejo, CALIFORNIA (USA)
Technology that navigates cup placement and measures changes in leg length to improve accuracy, reduce outliers and minimize the need for ...
Manufactured by:Caltech Instruments Pvt Ltd based inMumbai, INDIA
G.A.L. Adjustable Weld Gauge measures both leg lengths and weld throat fillet weld ...
Manufactured by:Vooner FloGard Corporation based inCharlotte, NORTH CAROLINA (USA)
The unloader pump design is used when there is not room to have the required drop leg length. These pumps require 0 NPSH and have the option of being flanged for easy maintenance. Unloader pump standard in CD4MCu. Stainless Steel upgrade available. Horsepower required is dependent on pressure and flow ...
Manufactured by:Modular Pontoon Systems BV based inAalst (GLD), NETHERLANDS
Side depth: 2.44 m. (8 ft); Water depth: 18.0 m; Spud legs: 4; Spud leg length: 28.0 m; Diameter: 762mm x 25 mm; HPU: 78 kW; Length: 36.58 m (140 ...
Manufactured by:Winamac Coil Spring, Inc. (WCS) based inKewanna, INDIANA (USA)
Torsion springs can be used to neutralize, lift, rotate, and or center rotating loads or torques. Single Torsion springs are produced at Winamac Coil Spring on computer controlled equipment. A wide variety of leg lengths, shapes, anchoring configurations and coil diameters are available to meet your torsion spring ...
Manufactured by:Modular Pontoon Systems BV based inAalst (GLD), NETHERLANDS
Length: 36.58 m. (12 ft); Width: 12.19 m. (40 ft); Side depth: 1.98 m. (6.5 ft); Water depth: 8.0 m; Spud legs: 4; Spud leg length: 12.0 m; Diameter: 762mm x 25 mm; HPU: 78 kW; Winches: 4 pc. Single drum SD7 ...
Manufactured by:Big John Trailers based inFolkston, GEORGIA (US) (USA)
Bolsters: 4x10 Rectangular Tubing. Bumber: Push Style. Landing Gear: Single Drop Leg. Length: 23 ft.. Standards: 5x5 Square Tubing. Axles: 25,000 lbs each. Tires: 11R- 22.5 / 11R-24.5. Rims: Unimount Steel. Suspension: Hutch 9700 . Lights: DOT ...
Manufactured by:Bochem Instrumente GmbH based inWeilburg, GERMANY
Type 1: base frame tube V (2 legs, form V). Type 2: base frame tube H (legs form H, bridge variable). A*=leg length. External dimensions A, B and C can be defined ...
Manufactured by:Oertli Instrumente AG based inBerneck, SWITZERLAND
I/A Quick Tip for use without irrigation sleeve, 45° aspiration port 0.35 mm, diameter 1.8 mm, leg-length 1.5 mm, for incisions of 2.8-3.2 mm, ...
Manufactured by:Roller Die + Forming based inLouisville, KENTUCKY (USA)
Roll formed metal angles are fundamental profiles in the roll forming industry, distinguished by their simplicity and versatility. These angles typically feature equal leg lengths, though Roller Die offers a variety of leg configurations to meet diverse needs. The company excels in maintaining tight tolerances on both the legs ...
Manufactured by:Fuse Medical Inc. based inRichardson, TEXAS (USA)
Designed to facilitate reproducible results allowing total hip replacement patients to return back to their personalized level of activity. Built to achieve optimal alignment, desired leg length, and rotational stability. Streamlined, two-tray instrumentation system to complement the surgical technique. ...
Manufactured by:SIOEN nv based inArdooie, BELGIUM
When working in dangerous and busy environments it is imperative you are very good visible. Thanks to the fluorescent colour and the reflective striping over the entire leg length you will definitely stand out with these trousers. Because of the inherent flame retardant properties of the fabric, the Empe trousers also protect against burns and splashes of molten ...
Manufactured by:UP Umweltanalytische Produkte GmbH based inIbbenbüren, GERMANY
Caliper digital, 40 mm outer leg length, 150 mm measuring range, IP40, with RS-232 interface for entering measuring results to the ...
Manufactured by:Consensus Orthopedics based inEl Dorado Hills, CALIFORNIA (USA)
The UniSyn Hip System features patented connection technology that allows the surgeon to independently fit the diaphysis and metaphysis, and then select the neck component that will best restore leg length, offset and anteversion of the patient’s hip joint. 59 Head Centers ¦ Infinite Version Control ¦ Titanium Plasma Surface ...
Manufactured by:ScreenCo Systems / Scott Meyer based inGenesee, IDAHO (USA)
All of our tripods feature 1" aluminum cleats beneath the feet for strong grip into soft soils. Available in 4', 5' and 6' leg lengths. New model with 5'-7' telescoping legs available. Makes pump removal from chambers and lift stations easy! Price varies by size and available options. Call or email today for ...
Manufactured by:Intellijoint Surgical Inc. based inKitchener, ONTARIO (CANADA)
It provides real-time, intraoperative measurements for fast, easy and accurate implant alignment for cup position, leg length and offset. ...