Refine by
Liquid Recirculation Pump Equipment & Supplies
18 equipment items found
Manufactured by:Mass Transfer Systems (MTS) - part of North American Filtration Family of Companies based inWalpole, MASSACHUSETTS (USA)
The Mass Transfer Systems bi-directional jet aerators are designed with jet aeration nozzles installed on both sides of the liquid/air jet aeration manifold. This configuration is most applicable for square or rectangular tanks, larger lagoons, and sequence batch reactors where directional flow patterns are not ...
Premium
Manufactured by:Vobis LLC based inEaston, PENNSYLVANIA (USA)
Our crystallizers are capable of yielding solids from a vast spectrum of product and waste feed streams enabling our clients to cost-effectively produce product crystals or reduce waste stream volumes creating landfill-ready solid ...
Manufactured by:Pompetravaini Spa based inCastano Primo, ITALY
The new HydroPack series represents the best solution for compactness, efficiency and functionality in the installation of total recirculation liquid-ring vacuum ...
Manufactured by:Pacer Pumps based inLancaster, PENNSYLVANIA (USA)
All major pump parts are precision molded of tough, corrosion resistant glass reinforced thermoplastics. These high strength plastics provide resistance to many acids, bases, solvents and salt water at temperatures as high as 200 degrees F (93C). O-rings and seals are Viton, EPDM or Buna-N. Stainless steel fasteners. The 1-1/2” and 2” models are the same pump with both ports threaded ...
Manufactured by:AcornVac, Inc. based inChino, CALIFORNIA (USA)
The 150 Series vacuum toilet and fixture waste system effectively and efficiently collects waste with a single 30-gallon collection tank and a PLC driven automatic control panel. Single frame, factory-assembled vacuum center. Compact size alleviates space constraints. UPC and CUPC ...
Manufactured by:AcornVac, Inc. based inChino, CALIFORNIA (USA)
The 200 Series vacuum toilet and fixture waste system effectively and efficiently collects waste with two 30-gallon collection tanks and a PLC driven automatic control panel. Single frame, factory-assembled vacuum center. Compact size alleviates space constraints. UPC and CUPC ...
Manufactured by:Pacer Pumps based inLancaster, PENNSYLVANIA (USA)
All major pump parts are precision molded of tough, corrosion resistant glass reinforced thermoplastics. These high strength plastics provide resistance to many acids, bases, solvents and salt water at temperatures as high as 200 degrees F (93C). O-rings and seals are Viton, EPDM or Buna-N. Stainless steel fasteners. The 1-1/2” and 2” models are the same pump with both ports threaded ...
Manufactured by:Pacer Pumps based inLancaster, PENNSYLVANIA (USA)
The self-priming Series ‘G’ pump is made in either Noryl® or Ryton®, providing a maximum range of chemical resistance. It is available with stainless steel or complete non-metallic solution contact. The pump comes standard with stainless steel external hardware. It is protected with a basket type strainer in either Polypropylene or ECTFE. The large cover makes initial priming ...
Manufactured by:Pacer Pumps based inLancaster, PENNSYLVANIA (USA)
The self-priming Series ‘G’ pump is made in either Noryl® or Ryton®, providing a maximum range of chemical resistance. It is available with stainless steel or complete non-metallic solution contact. The pump comes standard with stainless steel external hardware. It is protected with a basket type strainer in either Polypropylene or ECTFE. The large cover makes initial priming ...
Manufactured by:Zhengzhou Sykes Biotechnology Co., Ltd. based inZhengzhou, CHINA
An ( Explosion-proof ) rotary evaporator ( also be called rotary vacuum evaporator or Rotary Devaporizer or rotovap or rotavapor or rotavap ) is used for purification and distillation test. They rotate and shape a thin film in negative pressure condition by heating, evaporate efficiently, and then condense and recollect solvent to purify and separate. ...
Manufactured by:Zhengzhou Sykes Biotechnology Co., Ltd. based inZhengzhou, CHINA
An ( Explosion-proof ) rotary evaporator ( also be called rotary vacuum evaporator or Rotary Devaporizer or rotovap or rotavapor or rotavap ) is used for purification and distillation test. They rotate and shape a thin film in negative pressure condition by heating, evaporate efficiently, and then condense and recollect solvent to purify and ...
Manufactured by:Zhengzhou Sykes Biotechnology Co., Ltd. based inZhengzhou, CHINA
An ( Explosion-proof ) rotary evaporator ( also be called rotary vacuum evaporator or Rotary Devaporizer or rotovap or rotavapor or rotavap ) is used for purification and distillation test. They rotate and shape a thin film in negative pressure condition by heating, evaporate efficiently, and then condense and recollect solvent to purify and ...
Manufactured by:Zhengzhou Sykes Biotechnology Co., Ltd. based inZhengzhou, CHINA
An ( Explosion-proof ) rotary evaporator ( also be called rotary vacuum evaporator or Rotary Devaporizer or rotovap or rotavapor or rotavap ) is used for purification and distillation test. They rotate and shape a thin film in negative pressure condition by heating, evaporate efficiently, and then condense and recollect solvent to purify and ...
Manufactured by:Rovar Pumps Private Limited based inBelgaum, INDIA
Applications: Rovar RSC pumps are self-priming centrifugal pumps suitable for handling clear, liquid contains solids in suspension, contaminated and low-viscosity liquids. The innovative design, eliminating the need for a non-return valve, results in less maintenance. The self-priming ability prevents the pump from running dry and ensures smooth and easy ...
Manufactured by:Bionomic Industries Inc based inMahwah, NEW JERSEY (USA)
Whether you purchase one of our stand alone scrubbers or a waste heat recovery unit, leave it to the experts at Bionomic Industries to provide all the accessories and components needed to ensure a truly reliable trouble-free operating system. Backed by our many years of experience in providing engineered systems, our staff of competent qualified engineers can provide all the necessary components ...
Manufactured by:TCR-Tecora based inCogliate (MB), ITALY
ISOFROST 3 was born from the development of previous chiller systems ISOFROST and ISOFROST 2. ISOFROST 3 is able to support multiple samplings in extreme environmental conditions (e.g. summer season). A magnetic drive recirculation pump is incorporated in the device and not takes up valuable space in the tub allowing simultaneous sampling of PCDD/F & PCBs and others (e.g heavy metals, ...
Manufactured by:Evapco Inc. based inWestminster, MARYLAND (USA)
The LCR-P is specifically designed to be roof mounted on the refrigerated space. Penthouse units are available with Pumped Recirculated Liquid (PRL) ammonia evaporators for low and medium temperature applications, or Direct Expansion (DX) evaporators for medium and high temperature applications. Choose from 250 models and configurations of our ...
Manufactured by:Transvac Systems Ltd based inAlfreton, UNITED KINGDOM
Transvac Venturi Aerators and Mixers have been successfully implemented for Aeration and Tank Mixing applications throughout a number of industries. These include Oil and Gas, Pharmaceutical, Chemical, Food and Water ...