Refine by
Load Resistor Equipment & Supplies
55 equipment items found
Manufactured by:Wekomm Engineering GmbH based inPlanegg, GERMANY
When dealing with metrology tasks, you could usually have to chose between precision or high load capability. We have combined both. Now you can get precision and high load capability built into one single resistor. The high load precision resistors made by wekomm put electrical measurements to a whole new level. ...
Manufactured by:Telema SPA based inMilano (MI), ITALY
The load resistors (load banks) are the most technically advanced, most reliable and cheapest way to perform load tests on electrical power sources and are used in a variety of applications such ...
Manufactured by:Meatest, spol. s r.o. based inBRNO, CZECH REPUBLIC
Model M642 is programmable real-resistance decade with range from 0.1 Ω to 20 MΩ. Basic accuracy is 0.02 %, best resolution on the lowest range is 1 μΩ. Decade consists of high load resistors switched with combination of relays. Apart from resistance function, the M642 can be also used as an RTD temperature sensor simulatior (temperature ...
Manufactured by:Foresight Electronics Co, Ltd. based inGreenland Lehe City, CHINA
Load Element: Stainless steel resistors. Load Voltage: DC900V. Load Power: Total: 930KW, (Channel 1:465KW, Channel 2: ...
Manufactured by:Meatest, spol. s r.o. based inBRNO, CZECH REPUBLIC
Model M641 is programmable RTD simulator with range from 10 Ω to 300 kΩ. Basic accuracy is 0.1°C, resolution is 0.001°C. Decade consists of high load resistors switched with combination of relays. Apart from RTD temperature sensor simulation (temperature setting in degree of Celsius or Fahrenheit) the M641 can be also used as a standard ...
Manufactured by:Euro-Gas Management Services Ltd. based inChurston Ferrers, UNITED KINGDOM
Maximum zero shift(+20°C to +40°C):0,2ppm equivalent. Expected long term output drift:<2% signal loss/month. Recommended load resistor:33 Ohm. Bias voltage:not required. Output signal:-250 +75 nA/ppm. Output linearity:linear. Resolution:0.1ppm. Life time:2 years in air. Dimensions:20 mm diameter Height 20.7mm including pin projection. Part ...
Manufactured by:Research Energy of Ohio, Inc. based inNorwalk, OHIO (USA)
AD5 (BM175 series) Load Plug is used to test blasting machines. The load plug contains 10 resistors, each equal to the maximum load resistance of the blasting machine. Shipping Weight: 1 lb. (0.5 ...
Manufactured by:Thomson Power Systems member of Regal Rexnord Corporation based inMississauga, BRITISH COLUMBIA (CANADA)
Thomson Power Systems resistive test load banks utilize coiled chromium alloy load elements supported with cool cast ceramic insulators. 4.5' maximum continuous spacing is provided between each support point. All load resistor ends are fitted with silver soldered stainless steel connection studs.Thomson’s “cool ...
Manufactured by:ECM Technologies based inGrenoble Cedex 2, FRANCE
The Cristal range is made of furnaces dedicated to heat treating under vacuum at high temperatures. The enclosure is insulated with specific metals, with a possible choice of molybdenum or tungsten resistors. It is the perfect tool for clean treatments at high temperature. Its design allows precise positioning of loads. The patented resistor ...
Manufactured by:Scott Hydroelectric based inRepublic, WASHINGTON (USA)
This includes the hydro-turbine Morning Star 600 volt charge controller, disconnects, 3 phase rectifier, over current protection and dump load control/resistor for heating water or heat. Shipped prewired and mounted on a 19″ x 34″ ...
Manufactured by:Wekomm Engineering GmbH based inPlanegg, GERMANY
To work with currents up to 30A we have made special resistors which fulfil our quality requirements. Excellent long term stability, very low self heating and a maximum of independence from environmental influences define these resistors as well. All that effort so you can concentrate yourself onto your work and your measurement instrument just do what they are meant to to - their work. ...
Manufactured by:AMETEK Compliance Test Solutions (CTS) GmbH based inReinach, SWITZERLAND
The CN 200N1 is a standalone coupling network unifying two audio transformers being individually configurable for various test requirements (e.g. Ford FMC1278 and SAE J1113-2). The CN 200N1 is used to apply the test signals to the lines under test via an audio transformer to perform ripple voltage tests and continuous or transient conducted immunity ...
Manufactured by:Quantum Design GmbH based inPfungstadt, GERMANY
Its design supports modifications with modules for differential current and voltage measurements, optimizing for varying resistor loads and test applications. Unique MeasureSync™ technology ensures concurrent sampling across channels, enhancing data consistency. The MeasureLINK™ software offers flexible scripting, enabling seamless integration with ...
Manufactured by:Kinetic Traction Systems based inChatsworth, CALIFORNIA (USA)
In these micro-grid networks when renewable supply exceeds demand, such as during high wind or bright sun conditions, the conventional approach is connecting additional demand loads such as large resistor banks. When supply is less than demand during low wind conditions or cloud coverage, a diesel generator is often used to supply the power. In both scenarios, ...
Manufactured by:MBS AG based inSulzbach-Laufen, GERMANY
Unlike conventional current transformers with a 1 or 5 A secondary output signal, current sensors output a voltage ...
Manufactured by:AMETEK Compliance Test Solutions (CTS) GmbH based inReinach, SWITZERLAND
AMP 200N2 - Low-frequency signal / amplifier for supply simulation and magnetic field testing The AMP 200N2 has been designed as a low-frequency signal source to generate sinusoidal signals used to simulate ripple noise and ground shift noise as required by a variety of standards in the avionics, military and automotive industry. The AMP 200N2 is controlled by the NetWave (for testing Electrical ...
Manufactured by:Piezo.com is a Division of Mide Technology based inWoburn, MASSACHUSETTS (USA)
A 1-layer piezoelectric actuator produces curvature when one piezo layer expands while the other layer contracts. These transducers are often referred to as benders, bimorphs, or flexural elements. Bender motion on the order of hundreds to thousands of microns, and bender force from tens to hundreds of grams, is typical. The brass shim reinforcement laminated between the two piezoelectric layers ...
Manufactured by:Pepperl+Fuchs SE based inMannheim, GERMANY
Inductive analog. Analog output 0 V ... 10 V/4 mA ... 20 ...
Manufactured by:Euro-Gas Management Services Ltd. based inChurston Ferrers, UNITED KINGDOM
Physical Specification: Weight: 5g (approx). Housing Material: Noryl 110. Storage Life: 6 months in sealed container. Storage Conditions: +10°C to +30°C. Orientation: Any. Warranty Period: 18 months from date of ...
Manufactured by:Piezo.com is a Division of Mide Technology based inWoburn, MASSACHUSETTS (USA)
A single layer product recommended for energy harvesting and sensing applications. It also exhibits good performance as a resonant actuator. It is not recommended for applications requiring high force output. This product does not have mounting and alignment holes like the other ...