Refine by
Low Noise Accelerometer Equipment & Supplies
18 equipment items found
by:Silicon Audio Seismic based inAustin, TEXAS (USA)
The Silicon Audio Model 203 Low Noise Accelerometer bridges the gap between traditional strong motion accelerometers and weak motion seismometers. The exceptionally large dynamic range of the instrument can eliminate the need for multiple sensors and applications which once required a broad-band seismometer paired with a ...
Manufactured by:ASC GmbH based inPfaffenhofen, GERMANY
The ASC 3511LN is a uniaxial accelerometer that utilizes MEMS capacitive technology, making it suitable for precise and demanding applications. Its differential analog voltage output, adjusted by integrated electronics, allows for a wide range of measurements, making it flexible in terms of power supply voltage from 6 to 40 VDC. Notable for its low ...
Manufactured by:Reftek Systems Inc. based inDartmouth,, NOVA SCOTIA (CANADA)
The 147A Low Noise Accelerometer uses a state of the art force balance feedback technique to improve performance characteristics over conventional accelerometers. It is +/-4g full scale and has excellent dynamic range. Make the most of the dynamic range available by combining it with a 24-bi digitizer such as the Wrangler and the ...
Manufactured by:Vectory Sensor Systems ApS based inHerlev, DENMARK
The Vectory Sensor Systems Microrad is a rugged, versatile, very high accuracy tilt sensor / inclinometer, ideal for any kind of application where reliable, accurate tilt measurements are needed. The Microrad consists of 3 high accuracy state-of-the art low-noise MEMS accelerometers. These are used to measure the apparent gravity to output values ...
Manufactured by:Hpsystem.IT Srl based inPozzuoli (NA)., ITALY
The HPS MEMS Seismic Sensor is a high stability, low-noise triaxal accelerometer, consisting in three MEMS capacitive sensors which are sensitive to vibrations along three orthogonal directions. Its widly dynamic range, the superior bandwith, the low distorsion, its high shock tolerance, together with its thermal stability, make ...
Manufactured by:MonoDAQ d.o.o based inTrbovlje, SLOVENIA
MonoDAQ-E-gMeter is a fully integrated low-noise MEMS accelerometer with EtherCAT interface and DEWESoft software support. This makes it a tailor-made solution for permanent condition monitoring on big structures such as bridges, antennas and ...
Manufactured by:EMCORE Corporation based inAlhambra, CALIFORNIA (USA)
With a data rate 10x faster than competing systems, EMCORE’s advanced GEO-FOG 3D inertial navigation system (INS) includes three EMCORE ultra-reliable PIC enhanced gyroscopes integrated with three low-noise, high-grade 16g accelerometers, three axes of magnetometers, a pressure sensor, and the option of either a single or dual antenna GNSS ...
Manufactured by:ISTI - Instrumental Software Technologies, Inc. based inSaratoga Springs, NEW YORK (USA)
The GEOfba200 (Fig. 1 - 3) is a very low-noise triaxial force-balance accelerometer with a large dynamic range, suitable for seismology, hazard mitigation and civil engineering applications. The instrument has both a flat response to ground acceleration from DC to 215 Hz and a stable phase response within the passband. ...
Manufactured by:Inertial Labs, a VIAVI Solutions Company based in20129, VIRGINIA (USA)
The MS-IMU3025 MEMS Inertial Measurement Unit delivers standout inertial performance in an ultra-compact package. The tactical gyro bias instability and sub seven micro-g accelerometer bias instability supply ample inertial performance to support a wide range of applications from inertial navigation and control to precision platform stabilization. User configurable options allow the IMU to be ...
Manufactured by:Inertial Labs, a VIAVI Solutions Company based in20129, VIRGINIA (USA)
The MS-IMU3030 Inertial Measurement Unit delivers unmatched low drift performance in an ultra-compact aluminum package. The IMU contains triaxial MEMS gyros, accelerometers and magnetometers that are extensively tested and calibrated over the full operational temperature range to ensure the highest performance and robust operation. The gyro bias stability of 0.55 degrees per hour and accel bias ...
Manufactured by:Inertial Labs, a VIAVI Solutions Company based in20129, VIRGINIA (USA)
The MS-IMU3050 is an Inertial Measurement Unit that provides a smaller, lower power, and cost-effective alternative to Fiber Optic Gyro (FOG) based IMUs and other high performance MEMS IMUs. The IMU contains triaxial MEMS gyros, accelerometers, and magnetometers that are extensively tested and calibrated over the full operational temperature range to ensure the highest performance and robust ...
Distributed by:Geomatrix Ltd based inLeighton Buzzard, UNITED KINGDOM
The 147-01 is a force balance accelerometer which converts motion acceleration signals into voltage signals to measure various low frequency and ultra low frequency motion. The 147-01 accelerometer adopts the force balance feedback technique to make up for the mechanical characteristic limitations of conventional accelerometers. This overcomes the shortcomings of nonlinear distortion and ...
Manufactured by:Reftek Systems Inc. based inDartmouth,, NOVA SCOTIA (CANADA)
24-bit Strong Motion Accelerograph. 130-SMHR Strong Motion High Resolution Recorder provides accurate data and related information about seismic events, especially as they relate to buildings and structures. The 130-SMHR meets the USGS Advanced National Seismic System (ANSS) specifications for strong motion reference stations for deployment in urban areas. It is also certified under the ...
Distributed by:Geomatrix Ltd based inLeighton Buzzard, UNITED KINGDOM
The 131B-01 Accelerometer uses a Micro-Electro-Mechanical System (MEMS) variable capacitance displacement sensor. Because no coils or magnets are used, the accelerometer is inherently stable over temperature, with excellent reliability, linearity, hysteresis, and noise levels. The 131B-01/3 Tri-axial Accelerometer is best suited to structural ...
Manufactured by:Reftek Systems Inc. based inDartmouth,, NOVA SCOTIA (CANADA)
The SMA2 combines Reftek's latest generation of universal broadband seismic recorders, with the advanced high-resolution, capacitive accelerometer, model 131D. Designed to facilitate installation, security and maintenance in a single, secure enclosure optimized for structural monitoring ...
Manufactured by:Reftek Systems Inc. based inDartmouth,, NOVA SCOTIA (CANADA)
The SMHR2 combines Reftek's latest generation of universal broadband seismic recorder, with the advanced high resolution, force-balance accelerometer, model 147. Designed to facilitate installation, security and maintenance in a single, secure enclosure optimized for early warning system ...
Manufactured by:Nanjing Sky MEMS co., ltd. (SkyMEMS) based inNanjing, CHINA
MS3012 single/dual/tri-axial MEMS accelerometer sensor is one type of high-performance vibration monitoring sensor base on MEMS technologies. It adopts 7~24V or 5V±3% power supply, integrate X-Y-Z trial axes and self test function, it adopts high performance accelerometer, the dynamic range can reach 110dB. MS3012 accelerometer sensor has passed the strictest tests, it enjoys excellent ...
Manufactured by:Instrumented Sensor Technology, Inc. (IST) based inOkemos, MICHIGAN (USA)
The EDR-3C is a portable impact, shock and vibration full waveform recorder and has a built-in triaxial accelerometer that’s designed to measure shock, vibration, temperature and (as an option) humidity, pressure, or resistance-bridge devices. The programmable unit tags all acceleration events with a time and date to provide a time history of the dynamic environment experienced during a ...