Refine by
Manhole Ventilation Equipment & Supplies
21 equipment items found
Manufactured by:Sure Flame Products based inLethbridge, ALBERTA (CANADA)
Explosion proof motor. 12″ diameter/ductable. Ventilate manholes, tanks, vessels, or any confined space. Ducting can be attached to either or both ends for use as a blower and/or exhauster. CSA approved for class 1/group D hazardous ...
Manufactured by:Vanderlans and Sons, Inc. based inLodi, CALIFORNIA (USA)
OSHA requires continuous ventilation of manhole workspaces and HURCO helps you safely and efficiently comply. HURCO’s Original RIPCORD is the first ventilator specifically designed for our industry. Our unique “axial flow impeller” removes dangerous gases creating a safe unobstructed ...
Manufactured by:bioteg Biofilter Systems GmbH based inThurnau, GERMANY
Application: The sewer infiltration water stop WES-600/625/800 is used for the restraint of surface water from manholes of the sizes DN 600,625 resp. DN 800. It is used in all cases where sewer infiltration of surface water during rainfall should be reduced or prevented. During rainfall an integrated float reduces the water flow into the manhole. The ...
Manufactured by:Salher based inMadrid, SPAIN
Both equipment have a truncated cone shape, they are manufactured by Salher in glass fiber reinforced polyester with orthophtalic resins for underground installation and they are used for the elimination of suspended solids. The closed model has an intake in the manhole to install a ventilation ...
Manufactured by:Salher based inMadrid, SPAIN
PVC inlet and outlet pipes. Cleaning through the access shaft with a GFRP cover. Access only for authorized operators. Outlet in the manhole to install a ventilation ...
Manufactured by:Salher based inMadrid, SPAIN
The Imhoff tank CHC-IMH, Salher brand, is a settling-digestion equipment made of glass fiber reinforced polyester with orthophthalic resins according to EN-12255-4, which is used for the removal of suspended solids, with yields of 70 to 75%, and yields of 35 to 40% in the elimination of organic matter. This equipment includes a longitudinal deflector ...
Manufactured by:Salher based inMadrid, SPAIN
Dehydration or thickening of sludge from primary and secondary treatments. Truncated cone-shaped settling ...
Manufactured by:Salher based inMadrid, SPAIN
Suspended solids removal: settling - ...
Manufactured by:Salher based inMadrid, SPAIN
Class II Oil/water separator, 1 separation chamber, standard. The hydrocarbon separators class II are standard separators designed by Salher and manufactured in GFRP (Glass Fiber Reinforced Polyester), sized in accordance with EN 858. They separate mineral oil and grease and hydrocarbon from water and guarantee an outlet oil concentration lower than 100 ...
Manufactured by:Salher based inMadrid, SPAIN
The low-load activated sludge treatment plant (extended aeration) with fixed culture and primary settling chamber CHC-FS-OXIDEP is usually used to treat the water issued from small populations. It includes a primary settling chamber for equalization of the flow and the elimination of coarse solids. This GFRP equipment has an oxygen supply system and an equalization of the mixed liquor through a ...
Manufactured by:BIN Ltd. based inAleksandrów Kujawski, POLAND
Flat bottom silos type FBIN9 with sidewalls made of corrugated sheets of steel. Diameter of 8,59 metres. Loading capacity from 553 tonnes to 760 ...
Manufactured by:BIN Ltd. based inAleksandrów Kujawski, POLAND
Flat bottom silos type FBIN7 with sidewalls made of corrugated sheets of steel. Diameter of 8,59 metres. Loading capacity from 166 tonnes to 352 tonnes. ...
Manufactured by:Salher based inMadrid, SPAIN
WWTP by low-load activated sludge (extended aeration) with settling tank, blower, fine bubble diffusers and sludge recirculation system for small, medium and large ...
Manufactured by:Hydro-Elektrik GmbH based inRavensburg, GERMANY
Pipe tanks in stainless steel are the ideal solution and a guarantee of maximum retention of water quality. Stainless steel is inert and has been tried and tested in the field of drinking water storage with HydroSystemTanks set up in the ...
Manufactured by:Salher based inMadrid, SPAIN
WWTP for small populations. The low-load activated sludge treatment plant (extended aeration) with high-efficiency fixed culture CVC-OXIDEP-TC is usually used to treat the water of small towns and is certified according to EN 12566-3 ...
Manufactured by:Sierra Environmental Technologies, LLC based inPacific, MISSOURI (USA)
SWEET-AIRE PE-500 MDPE drum scrubber units are designed to provide the same adsorption functionality as larger units; but only on a smaller scale. The drums can be filled with media custom-selected to provide the maximum time on stream between changeouts and to deliver the optimum contaminant removal while in ...
Manufactured by:Sierra Environmental Technologies, LLC based inPacific, MISSOURI (USA)
Small cartridge scrubber complete with corrosion-resistant fan and motor assembly. Unit is housed in a vented fiberglass enclosure. Sized to handle lateral line and individual residential/commercial structure odor control. Sweet-Aire Cartridge scrubber units are designed to provide the same adsorption functionality as larger units; but only on a smaller scale. Each unit can be custom-fitted to ...
Manufactured by:Sierra Environmental Technologies, LLC based inPacific, MISSOURI (USA)
Sweet-Air PE-200 HDPE drum scrubber units are designed to provide the same adsorption functionality as larger units; but only on a smaller scale. The drums can be filled with media custom-selected to provide the maximum time on stream between changeouts and to deliver the optimum contaminant removal while in ...
Manufactured by:Sierra Environmental Technologies, LLC based inPacific, MISSOURI (USA)
Sweet-Aire PE-300 MDPE drum scrubber units are designed to provide the same adsorption functionality as larger units; but only on a smaller scale. The drums can be filled with media custom-selected to provide the maximum time on stream between change outs and to deliver the optimum contaminant removal while in ...
Manufactured by:Sierra Environmental Technologies, LLC based inPacific, MISSOURI (USA)
SWEET-VENT FILTER units are designed to provide the same adsorption functionality as larger units, only on a smaller scale. Each vent unit can be custom-fitted to meet the contaminant removal requirements of almost any application. The SWEET-VENT filter can be filled with media custom-selected to provide the maximum time on stream between changeouts and to deliver the optimum contaminant removal ...