Refine by
Applications
- Structural Monitoring Solutions for Bridge Monitoring
- Structural Monitoring Solutions for Fracture Critical Monitoring
- Structural Monitoring Solutions for Overweight Monitoring
- Structural Monitoring Solutions for Barge and Vehicle Collision Detection on Bridges
- Structural Monitoring Solutions for Tunnel Monitoring
- Structural Monitoring Solutions for Structural Health Monitoring
- Structural Monitoring Solutions for Others
- Finite Element Method Model Verification for Bridges, Buildings and other Structures
- Structural Monitoring Solutions for Remote Monitoring of Bridges under Extreme Permit Loads or Superloads
- Geothermal Installations
- Structural Monitoring Solutions for Wireless Bridge Bearing/Expansion Joint Monitoring
- Structural Monitoring Solutions for Scour Critical Bridges Monitoring
- Structural Monitoring Solutions for Bridge Load Rating
- Remote Monitoring for Water Level of Bridges and Flood Zones
- Structural Monitoring Solutions for Seismic Effect Quantification/ Vibration Monitoring
- Structural Monitoring Solutions for Routine/ Contract Bridge Load Rating Validation
- Structural Monitoring Solutions for Structural Fatigue Analysis based on Rainflow-counting Methodology
- Structural Monitoring Solutions for Remote Retaining Wall Monitoring
- Structural Monitoring Solutions for Monitoring the Roof under Snow Loads
Mounted Drill Equipment & Supplies
326 equipment items found
Premium
Manufactured by:Sunmoy Technology Company Limited based inYueqing, CHINA
The SUNMOY HG300D drilling rig is a powerful machine designed for drilling in various geological formations. It is equipped with a hydraulic system that provides downward hydraulic pressure and rotational force to the drill bit, allowing it to penetrate through rock and other hard materials. The hydraulic system of the HG300D drilling rig consists of hydraulic pumps, cylinders, and pipes that ...
Manufactured by:Claydon Drills/ Claydon Yield-o-Meter Ltd based inWickhambrook, Newmarket, UNITED KINGDOM
The largest model in the mounted range, the 6m seed only Evolution drill has a hopper capacity of 1,910 litres and comes with a full range of rear toolbar and seeding set-up options. The leading tine can also be swapped out for the LD lower disturbance set-up. GPS speed sensing, electronically driven metering systems and a 4-channel drill ...
Manufactured by:Jordan Engineering based inSudbury, UNITED KINGDOM
For larger areas and larger tractors, our VEGA models are available with Cat 1 and Cat 2 three-point linkage, with sowing widths from 2M up to 3M. Also available in a choice of row widths, they have all the main features of the smaller Super Sow-Lites. A good machine for the smaller farmer, the VEGA is equally at home sowing cereals, grass or game ...
Manufactured by:Claydon Drills/ Claydon Yield-o-Meter Ltd based inWickhambrook, Newmarket, UNITED KINGDOM
The 4.8m seed only Evolution drill has a hopper capacity of 1,910 litres and comes with a full range of rear toolbar and seeding set-up options. The leading tine can also be swapped out for the LD lower disturbance set-up. GPS speed sensing, electronically driven metering systems and a 4-channel drill computer are fitted as standard. The M4 has a recommended minimum power requirement of 240 ...
Manufactured by:Claydon Drills/ Claydon Yield-o-Meter Ltd based inWickhambrook, Newmarket, UNITED KINGDOM
The 5m seed only Evolution drill has a hopper capacity of 1,910 litres and comes with a full range of rear toolbar and seeding set-up options. The leading tine can also be swapped out for the LD lower disturbance set-up. GPS speed sensing, electronically driven metering systems and a 4-channel drill computer are fitted as standard. The M4 has a recommended minimum power requirement of 250 ...
Manufactured by:Weaving Machinery based inWorcestershire, UNITED KINGDOM
The GD drill is the outcome of continuous refinement and development, to create a simple yet precise seed drill. It features the patented and future proofed GD coulter, which provides remarkably low soil disturbance, has a very low draught requirement along with an excellent service life. The GD drill excels in its adaptability to satisfy most ...
Manufactured by:Claydon Drills/ Claydon Yield-o-Meter Ltd based inWickhambrook, Newmarket, UNITED KINGDOM
The 3m Hybrid M3 is one of the most popular mounted drills in the range with owner-operators. With a 1,750 hopper and a 150hp power requirement, the M3 can drill up to 20 hectares a day. It comes with a full range of rear toolbar and seeding set-up options. The leading tine can also be swapped out for the LD lower disturbance set-up, and a ...
Manufactured by:Claydon Drills/ Claydon Yield-o-Meter Ltd based inWickhambrook, Newmarket, UNITED KINGDOM
The 4m Hybrid M4 has a hopper capacity of 1,750l and comes with a full range of rear toolbar and seeding set-up options. The leading tine can also be swapped out for the LD lower disturbance set-up. The M4 has a power requirement of 200 ...
Manufactured by:Claydon Drills/ Claydon Yield-o-Meter Ltd based inWickhambrook, Newmarket, UNITED KINGDOM
The 3m Hybrid M3F steps up from the M3 with a larger capacity hopper at 2,100 which can be divided 50:50 to apply fertiliser at the same time as drilling, either above the seed or below it. The M3F comes with a full range of rear toolbar and seeding set-up options. The leading tine can also be swapped for the LD lower disturbance set-up, and a drawbar and front toolbar fitted to transform into a ...
Distributed by:Pickett Oilfield based in, TEXAS (USA)
IDECO H-30 Trailer Mounted Drilling Rig for sale by Pickett Oilfield. This quality IDECO H-30 Trailer Mounted Drilling Rig is in good used condition. PickettOil.com offers prospective buyers an extensive selection of quality new and used oilfield equipment, including trailer mounted drilling rigs ...
Manufactured by:Beretta S.r.l. based inBesana in Brianza, ITALY
Skid-mounted drilling rig for exploration, with wireline system, portable and fully modular; maximum depth that can be reached 800 ...
Manufactured by:Bay Shore Systems Inc. based inRathdrum, IDAHO (USA)
Are you in need of a truck-mounted rig that is both easy to use and has a high degree of customization? What about a machine with simple, ergonomic controls, customized hydraulic solutions, and that is compatible with a wide variety of carrier brands? Well, look no further than Bay Shore Systems’ ...
by:Ruen Drilling International, Inc. based inClark Fork, IDAHO (USA)
This drill has a depth capacity with 6' I.D. augers of 125'-150'. It has a 250 gallon water tank and down hole water pump, and is mounted on a tandem axle truck. This machine is used primarily for 6'-10' I.D. hollow stem augers, installing monitoring and recovery wells. ...
Manufactured by:RTDrill USA based inPhilipsburg, PENNSYLVANIA (USA)
Air compressor and Power related: multicore cooler package with thermostatic controlled fan for 54°C -130° F ambient cooler. Drill Mast, angle related : Angle drilling 0° - 30° in 5° increments. Water injection, Dust control and ...
Manufactured by:Comacchio S.p.A. based inRiese Pio X (TV), ITALY
Engine Powe : 33 kW (44 HP). Max Width : 2.500 mm : 8.2 ft. Weight : 1.600 - 2.900 kg : 3,550 - 6,400 lbs. Mast Feed : 2.430 - 3.250 mm : 7.9 - 10.7 ft. Feed Force : 2.500 daN : 5,620 lbs. Retract Force : 2.500 daN : 4,620 lbs. Rotary Torque : 200 - 380 daNm : 1,475 - 2,803 lb*ft. Rotary Speed Range : 80 - 560 rpm. Clamp Range : 45 - 220 mm : 1.8 - 8.7 ...
Manufactured by:Comacchio S.p.A. based inRiese Pio X (TV), ITALY
Engine Power: 55 - 100 kW (74 - 134 HP). Max Width: 2.500 mm: 8.2 ft. Weight: 6.000 - 8.000 kg: 13,250 - 17,650 lbs. Mast Feed: 3.500 mm: 11.5 ft. Feed Force: 4.500 daN: 10,116 lbs. Retract Force: 6.500 daN: 14,613 lbs. Rotary Torque: 450 - 1.400 daNm: 3,319 - 10,326 lb*ft. Rotary Speed Range: 70 - 980 rpm. Clamp Range: 45 - 325 mm: 1.8 - 12.8 ...
by:Aardvark Drilling Inc. based inGuelph, ONTARIO (CANADA)
A midsized drill rig, outfitted for auger, mud rotary, and continuous sampling. Ideally suited for typical geotechnical and environmental drilling applications in a location with adverse ...
Manufactured by:Prime Rigs Ltd based inGurugram, INDIA
PRL Truck Mounted Drill Rig Model PDTHR-300 Brand New is primarily designed for water well applications as drinking water or for agricultural use. PRL PDTHR- 300 Brand New is among the best and most sought-after truck-mounted drilling rigs in the market. It is intended for use in borehole drilling for consumable ...
Manufactured by:Prime Rigs Ltd based inGurugram, INDIA
PRL Truck Mounted Drill Rig Model PDTHR-400 Brand New is primarily designed for water well applications as drinking water or for agricultural use. PRL PDTHR- 400 is among the best and most sought-after truck-mounted drilling rigs in the market. It is intended for use in borehole drilling for consumable and ...
Manufactured by:Jordan Engineering based inSudbury, UNITED KINGDOM
For smaller or sensitive areas of crop patching, grass seeding, over seeding, game cover or for just carrying out conventional sowing the Mounty ATV drill is an excellent machine for the job. Introduced in autumn 2017, it is one of the only drills available for mounting onto the ATV itself. It is available in a number of builds to suit the size ...