Refine by
Applications
- Gas detection for building ventilation control
- Temperature and gas sensing solutions products for indoor environments
- Trace gas analyzers for airborne molecular contamination (AMC) sector
- Biogas measurement for the waste to energy industry
- Secundary air flow measurement for power generation industry
- Emission monitoring for cement plants
- Gas measurement for the pulp & paper industry
- Greenhouse gas monitoring for regulations and compliance consultancy
- Gas calibration for laboratories
Multipoint Gas Equipment & Supplies
23 equipment items found
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
The ACME MegaSet series is a microprocessor-based multipoint multigas detection and control system that can be used with the GasPost sensors. The communication between the Control Panel and the remote GasPost sensor/transmitters is accomplished through a true RS485 daisy chain network. The versatility of the multipoint multigas detection system allows the user to ...
Manufactured by:DOD Technologies Inc based inCary, ILLINOIS (USA)
The EC20x Multipoint Electrochemical Gas Detector Cabinet is the next generation of our EC20 cabinet system. It offers the convenience of gas monitoring with the sample distance of a larger ...
Manufactured by:CEA Instruments, Inc. based inWestwood, NEW JERSEY (USA)
SERIES U gas detectors utilize unique, patented sensors that are unaffected by moisture, temperature change, or poisons. Dedicated units are available for Hydrogen Sulfide, Sulfur Dioxide, Carbon Monoxide, Ammonia, Diesel/Gasoline Vapors, Total Hydrocarbons, Hydrogen, Combustibles (as Methane), Freons, or Ethylene Oxide and Alcohols. SERIES U sensors are solid state, diffusion type with no pump ...
Premium
Manufactured by:Umwelttechnik MCZ GmbH based inBad Nauheim, GERMANY
Compact system for PC-controlled multipoint multi-component span gas generation for up to 25 l of span gas / hour. Up to 8 gases can be mixed into one span gas. An ozone generator can be integrated to generate ozone span gas or for gas phase titration with ...
Premium
Manufactured by:ESCO International (EI) based inGlan Conwy, UNITED KINGDOM
ESCO International can offer ozone analyzers including ozone monitoring in the gas phase, water phase and atmosphere. Gas phase ozone monitors are suitable for measurement of the ozone produced by the ozone generator as well as the ozone off-gas that leaves the ozone contact chamber. The liquid phase monitor is suitable for measuring the ...
Manufactured by:Kurz Instruments, Inc. based inMonterey, CALIFORNIA (USA)
K-BAR 2000B multipoint insertion flow meter uses up to four sensors for measurement redundancy and to ensure accuracy. Its rugged design withstands the high stress and high vibrations found in large industrial stacks and ducts that commonly have wide-ranging velocity and temperature profiles. The K-BAR 2000B supports process temperatures up to 260°C or up to ...
Manufactured by:Kurz Instruments, Inc. based inMonterey, CALIFORNIA (USA)
K-BAR 2000B-WGF multipoint insertion flow meter is engineered specifically for wet stacks, condensing gas environments, and biogas applications. The K-BAR WGF processes the dry flow signal independent of the effects of moisture in the process gas stream. K-BAR 2000B-WGF flow meters have effectively no impact on the flow stream, proven high ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
The Acme WS GasPost Series toxic or combustible gas sensor/transmitter measures the concentration of the target gas in an enclosed area and transmits this value to the control panel via a 900MHz or 2.4 GHz wireless medium. The WS Wireless GasPost Sensor / Transmitter includes a high gain antenna concealed inside the enclosure as well as a built-in battery pack that can be easily accessed and ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
The Acme GasPost II toxic gas sensor/transmitter measures CO and NO2 gas concentrations in enclosed areas and transmit its readings to a CEL-series monitor/controller over an addressable RS-485 “Daisy-Chain” sensor ...
Premium
Manufactured by:Umwelttechnik MCZ GmbH based inBad Nauheim, GERMANY
PC-controlled multipoint multi-component span gas generation for up to 32 measuring stations or 25 m³ span gas / hour. Up to 16 bottled span gases can be connected and mixed into one span gas. An ozone generator can be integrated to generate ozone span gas or for gas phase titration with ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
The Acme GasPost toxic gas sensor/transmitter measures the concentration of the target gas in an enclosed area and produces a proportional analog output ...
Manufactured by:Analytical Technology - a brand by Badger Meter based inCollegeville, PENNSYLVANIA (USA)
Many gas detection applications require multiple sensing locations to provide adequate area protection for plant personnel. Signals from a variety of field measurement sites are often transmitted to a central location where display and alarming functions are needed. ATI’s Series C14 ScanAlarm Receiver provides a versatile central monitor that can be configured to meet most ...
Manufactured by:DOD Technologies Inc based inCary, ILLINOIS (USA)
The ChemLogic Four-Point Gas Detector is our flagship continuous monitor for multipoint, low-maintenance colorimetric gas detection. Guarantees low level gas detection that’s interference free, simple to install, and easy to ...
Manufactured by:DOD Technologies Inc based inCary, ILLINOIS (USA)
The ChemLogic Continuous Eight-Point Gas Detector is our flagship monitor for multipoint, low-maintenance colorimetric gas detection. Guarantees low level gas detection that’s interference free, simple to install, and easy to ...
Manufactured by:LSE Monitors based inGroningen, NETHERLANDS
In order to extract sample gas from multiple points and transport it to an LSE NH3 analyzer, LSE Monitors has developed a multipoint sampler for measuring NH3 in ambient air. The multipoint sampler and the gas connections be-tween the sample points and the analyzer are custom-built for an optimum solution for the ...
Manufactured by:Advanced Energy Industries, Inc. based inDenver, COLORADO (USA)
The Advanced Energy Innova 1409 is a reliable, easy-to-use multipoint sampler for gas sampling of up to 24 different locations. The Innova 1409 is designed to be remotely controlled from a PC using a USB interface in conjunction with an Innova Photoacoustic Gas Monitor to provide a flexible, sensitive, and accurate monitoring ...
Manufactured by:IUT Technologies GmbH based inBerlin, GERMANY
Our MPS (Multipointsampler) is designed for subsequently continuous monitoring of multiple measuring points. It’s designed to work as an integral part of a measuring system. It is used for online measurements. The sample pump, valves and sample lines are at ambient temperature. It is an ideal tool to measure components in ambient conditions from several measuring ...
Manufactured by:Defiant Technologies, Inc based inAlbuquerque, NEW MEXICO (USA)
Advantages of the BASS-100 Automated Calibration Gas Dilution System:Uses less calibration gas. Use one calibration standard and provide multiple concentrations for calibration. Multiple-point calibration data generated ...
Manufactured by:Defiant Technologies, Inc based inAlbuquerque, NEW MEXICO (USA)
The Gas Diluter is a robust system for gas calibration in the field, and is designed to be used with the FROG portable GC or any other gas chromatography system. The Gas Diluter dilutes a calibration gas, which allows for a multi point ...
Manufactured by:HI-Q Environmental Products Company, Inc. based inSan Diego, CALIFORNIA (USA)
HI-Q Environmental Products Company's product line includes complete stack sampling systems, consisting of a specified type of probe, in-line filter holder, the transport line, sampling pump and flow controller. We recommend, design, and supply complete systems. HI-Q Environmental Products Company is able to make stack-sampling systems design suggestions by receiving your sampling requirements ...