Refine by
Open Cooling Circuit Equipment & Supplies
34 equipment items found
Manufactured by:OFS Online Fluid Sensoric GmbH based inRonneburg, GERMANY
Permanent rainwater in tanks or circulation waters in air conditioning, humidification or open cooling systems are heavily contaminated with germs. Benefiting from a warm climate in the environment or in the pipes form biofilms and legionella. In addition to the intensive use of biocides, health hazards are possible. With the electrolytic degermination, the water is microbiologically purified ...
Manufactured by:Torraval Cooling S.L - part of The MITA group based inLeioa, SPAIN
The CTFP series is indicated for plants of medium or large size, specially designed for the most adverse conditions, that is, complex waters in plants of medium or large ...
Manufactured by:Torraval Cooling S.L - part of The MITA group based inLeioa, SPAIN
The PME-E series is suggested for medium and large size plants, all models are totally preassembled at our ...
Manufactured by:Torraval Cooling S.L - part of The MITA group based inLeioa, SPAIN
The PMS series is suggested for small size plants, all models are totally pre-assembled at our ...
Manufactured by:MITA S.r.l. based inSiziano (PV), ITALY
PME-E series is suggested in medium/big size plants, all models K12 version are EUROVENT Certified. Capacity: from 860 kW to 2,6 MW. Directly coupled axial motor-fan group/s, low installed power, low noise levels. IP56 motors, lockable isolating switch pre-wired to the motor-fan group/s to facilitate the final installation. Casing made of fibreglass reinforced polyester resin (FRP) sandwich ...
Manufactured by:MITA S.r.l. based inSiziano (PV), ITALY
PMM series is suggested in big size plants. Every unit is designed according to the technical data of the relevant project. All models are made of factory pre-assembled modules and components. The particular design of PMM series grants a quick and inexpensive installation, besides the possibility of adjusting/designing the unit to fit the existing basins or ...
Manufactured by:Hebei Feiyu Cooling Equipment Co., Ltd. based inHengshui, CHINA
Open circuit cooling tower is a cooling device that achieves process circulating water cooling by spraying hot process circulating water on the packing and undertaking heat transfer by contacting with the air flowing through the ...
Manufactured by:Torraval Cooling S.L - part of The MITA group based inLeioa, SPAIN
The MCT series is suggested for small/mediumsized installations and indoor installations. All models are totally pre-assembled at our ...
Manufactured by:Torraval Cooling S.L - part of The MITA group based inLeioa, SPAIN
The PMM series cooling towers are suggested for large size plants. The equipment is designed according to the characteristics of each project and all models are composed of modules and components pre-assembled in our factory. The PMM series design grants a quick and economical installation besides the possibility of adaption to existing ...
Manufactured by:DECSA srl based inVoghera, ITALY
The SQA series industrial cooling tower is an open cooling tower designed and built for industrial applications with water even partially contaminated with suspended solids. Designed to guarantee a reduced water consumption and ensure minimum environmental impact, SQA stands out from the other industrial cooling towers of the industrial market thanks to a chimney-shaped fan section capable of ...
Manufactured by:DECSA srl based inVoghera, ITALY
TMA-EU series open circuit cooling towers are designed and built by Decsa to best suit all plant applications where high efficiency and low operating cost are required cooling towers. Designed to optimize the L/G ratio within the unit resulting in optimized committed power and reduced operating costs-the TMA-EU water ...
Manufactured by:DECSA srl based inVoghera, ITALY
TMR open circuit cooling towers are forced-draft cooling towers that meet all applications which require high efficiency and low operating costs. Made of hot-dip galvanised steel sheet Z-725, they stand out for double inlet centrifugal fans with forward curved blades, (that ensure the lowest noise), dynamically balanced and ...
Manufactured by:MITA S.r.l. based inSiziano (PV), ITALY
PMS series is a fiberglass cooling tower suggested in small size plants, all models K12 version are EUROVENT Certified. Capacity: from 18 to 860 kW. Directly coupled axial motor-fan group/s, low installed power, low noise levels. IP56 motors. Entirely corrosion–free casing, basin (with sloping base) and water distribution system (FRP, PVC, PP, PE) equipped with non-clogging PP spray ...
Manufactured by:MITA Cooling Technologies S.r.l. based inSiziano (PV), ITALY
It is a cooling tower for industries of any type and for any water quality: very compact, self-supporting, light and long-lasting non-corrodible fiberglass ...
Manufactured by:MITA Cooling Technologies S.r.l. based inSiziano (PV), ITALY
A light and non-corrodible open-circuit evaporative cooling tower: process industry and HVAC operators will be able to count on its multiple versions and ease of transport and ...
Manufactured by:Hunan Yuanheng Technology Co., Ltd. based inChangsha, CHINA
YHD series cooling tower from Yuanheng features state-of-the-art induced draft, counter flow technology to deliver superior operating advantages in any climate. With reliable thermal performance and a conditioned resistance to corrosion, this series of cooling towers provide the desired heat rejection consistently. For maintenance, they simply work ...
Manufactured by:Hunan Yuanheng Technology Co., Ltd. based inChangsha, CHINA
YHW as a new generation of Yuanheng's cross flow cooling tower, adopts the new design concept, through the use of advanced production technology of automated assembly line, perfect testing methods and quality control program, with multiple characteristics of reliability, high efficiency, energy saving, water saving, low noise, compact, simple field assembly in ...
Manufactured by:MITA Cooling Technologies S.r.l. based inSiziano (PV), ITALY
This is a series of large industrial cooling towers for power generation, steel and aluminium processing, cogeneration and other large production sites. Efficiency, high performance, reduced installation and transport costs are ...
Manufactured by:Torraval Cooling S.L - part of The MITA group based inLeioa, SPAIN
The field erected cooling towers are designed for large industrial plants and are suitable for high flow rates (500-10,000 ...
Manufactured by:Torraval Cooling S.L - part of The MITA group based inLeioa, SPAIN
The closed circuit cooling tower MCC works in free cooling: the fluid circulates inside a tube evaporator coil. It is suggested as an alternative to open cooling circuits with heat exchangers, since the cooling liquid cannot be polluted by external agents. ...