Show results for
Refine by
Optoelectronic Sensor Equipment & Supplies
10 equipment items found
Manufactured by:TT Electronics based inAbercynon, UNITED KINGDOM
The 2N2222AUA (TX - Obsolete, TXV - NRND) is a hermetically sealed ceramic surface mount general purpose switching transistor. The four pin ceramic package is ideal for designs where board space and device weight are important design considerations. The “UA” suffix denotes the 4 terminal leadless chip carrier package, type “A” per MIL-PRF-19500/255. Typical screening per ...
Manufactured by:TT Electronics based inAbercynon, UNITED KINGDOM
The OPF1414 series fiber optic transmitters contain a high speed 840 nm GaAIAs LED. This LED in conjunction with the package lensing is designed to efficiently couple light into multimode optical fibers ranging in size from 50/125 μm up to 200/230 μm. The high coupling efficiency of the LED and lensing allows the devices to be used at low current drive levels thus decreasing the power ...
Premium
Manufactured by:Tecnidro Srl based inGenova (GE), ITALY
The TW series water meters, manufactured in Italy by TECNIDRO, are specifically designed for all applications with raw water, in particular, agricultural irrigation, gardening and waste waters. The impeller measures the flow speed and its rotation is transmitted to a screen for the visualization of the total recorded volume. This class of measurers adopts an innovating technology that differs ...
Manufactured by:Cubic Sensor and Instrument Co., Ltd based inWuhan, CHINA
LED particle sensor PM1006K adopts principle of optical sensing method to detect the variation trend of particle (size between 0.3μm~10μm) concentration in the air. An infrared light emitting diode and an optoelectronic sensor are optically arranged inside, dust concentration is measured by detecting the intensity of scattered light,and output ...
Manufactured by:ELCO Industrie Automation GmbH based inOberstefeld, GERMANY
Central to its function is a coded disk that attaches to the rotary shaft, featuring alternating transparent and opaque sections. As rotation occurs, the disk interacts with an optoelectronic sensor emitting light, generating signals whenever light is obstructed or permitted passage. These signals, or pulses, are counted by electronic systems to gauge speed and ...
Manufactured by:UQG Optics Ltd. based inMilton, Cambridge, NORTHERN IRELAND
The glass surfaces are characterized by their smoothness, excellent surface quality, and flatness, featuring low microroughness of less than 1 nm (RMS). These plates are primarily used in optoelectronics, optical sensors, MEMS (Micro-Electro-Mechanical Systems), and microscopy applications, including microscope slides and cover slips. UQG offers these glasses as ...
Manufactured by:Geovane, developed by Kintech Engineering based inZaragoza, SPAIN
The Geovane device offers a revolutionary approach to measuring wind direction by leveraging high-resolution optoelectronic sensors to accurately determine True North. It uses a patented design incorporating 2048 photosensing pixels to capture and analyze solar azimuth values, which its embedded processing unit compares with computed theoretical values. ...
Manufactured by:Microcertec SAS based inCollegien, FRANCE
Microelectronic circuits continuously require new packaging technologies. Ceramic substrates are widely used in this field for their good dimension stability, high electrical insulation as well as their resistance to high temperature. But it is now possible to create microelectronic circuits on 3D carriers made with ceramics. This new type of component integrates electrical and mechanical ...
Manufactured by:SENTECH Instruments GmbH based inBerlin, GERMANY
The SENTECH SI PEALD system is designed for the homogenous and conformal coating of sensitive substrates and layers, operating efficiently at low temperatures under 100°C. This advanced atomic layer deposition technology ensures precise, conformal, and uniform film deposition, crucial for semiconductor applications like high-k dielectric materials. ALD systems by SENTECH offer in-situ ...
Manufactured by:Microcertec SAS based inCollegien, FRANCE
Advanced ceramics are widely used in laser systems due to their combined properties of very good electrical insulation - high voltage and high current - and resistance to gas and plasma corrosion. Their resistance to temperature variations, to high temperatures, as well as their very low thermal expansion make them reliable materials to manufacture precision ...