Refine by
Applications
- Air Quality Monitor & Environmental Particulate Monitoring Instruments for Professional
- Air pollution, emission and process monitoring systems for power generation
- Environmental Impact Assessment Monitoring for Tracking Industrial Emissions
- Air Pollution Measurements for Education
- Sensors for Air Quality Measurements?
- Air Quality and Noise Monitoring for Roadside Traffic
- EHS Air Quality Monitoring for Industrial Compliances
- Environmental Monitors for all the Requirements
- Chemical Industries, Refineries and Industrial Areas
- Airports / Railway Stations / Seaports
- Landfill Sites
- Gas safety and process control for gas/oil/coal-fired power generation and refineries
- Oxygen and carbon dioxide analyzers solutions for scientific and industrial industry
- Air Quality Monitor & Environmental Particulate Monitoring Instruments for Home - Indoor Air Quality Monitor
- Air Quality Monitor & Environmental Particulate Monitoring Instruments for Business
- Oxygen and carbon dioxide analyzers solutions for biological, environmental, industrial, research, process sector
- Process analyzers & instruments for NOx reduction
- Process analyzers & instruments for continuous emissions monitoring (CEM)
- Process analyzers & instruments for combustion efficiency and fuel air ratio
- Process analyzers & instruments for oxygen measurement
Particulate Sensor Equipment & Supplies
87 equipment items found
Premium
Manufactured by:Oizom Instruments Pvt. Ltd. based inAhmedabad, INDIA
The Particulate Matter sensor module can accurately measure respirable suspended particulate matter – PM2.5 in the ambient air. The PM sensor module design is capable to monitor the atmospheric particulate matter concentration on a real-time ...
Premium
Manufactured by:Optical Scientific Inc. (OSi) based inGaithersburg, MARYLAND (USA)
The OFS-2000P Particulate and Flow sensors report Air Flow and a general Particulate loading and percent opacity in virtually any operating condition. OSi's patented Optical Flow Sensor (OFS) makes drift-free measurements across the entire stack, duct or pipe diameter and calculates an accurate average flow reading. It is the ...
Premium
Manufactured by:ENVEA based inPoissy, FRANCE
The last generation of Cairsens micro-sensors for Particulate Matters (PM) monitoring operates without any influence from moisture in ambient air. They measure PM1, PM2.5 and PM10 ...
Manufactured by:Auburn based inBeverly, MASSACHUSETTS (USA)
This standard sensor is designed for easy install and reduced maintenance ...
Manufactured by:Auburn based inBeverly, MASSACHUSETTS (USA)
This high-performance sensor designed for industrial applications with a wide variety of mount and sensor configurations to meet your process ...
Manufactured by:Environmental Devices Corporation (EDC) based inPlaistow, NEW HAMPSHIRE (USA)
Haz-Dust Model AQ-10 Air Quality Particulate Sensor is a versatile transducer designed to continuously monitor for the presence of airborne particles. The AQ-10 is calibrated for OSHA and EPA regulations. Suitable for monitoring emissions from cyclone, precipitators, bag houses or any dust control device. ...
Manufactured by:HCTM based inIcheon-si, SOUTH KOREA
The AtrSens can be measured using a light scattering method. The AirSens functions as a particle counter that measures particles in 16 channels and a measuring device that can measure PMlq, PM2.5, and ...
Manufactured by:HCTM based inIcheon-si, SOUTH KOREA
The AirSensPM can be measured using a light scattering method. The AirSensPM functions as a particle counter that measures particles in 16 channels and a measuring device that can measure PM1.0, PM2.5, and ...
Manufactured by:Endress+Hauser Conducta Inc. based inAnaheim, CALIFORNIA (USA)
The AF12 sensor accurately measures particulates ranging from 200ppm to 10,000ppm, featuring Pyrex optics for consistent performance under industrial conditions. Alternative options include fire polished Quartz, Lexan®, or Sapphire optics. It utilizes a low voltage incandescent lamp for extended operational life. The sensor can be equipped ...
Manufactured by:Qweriu BVBA based inSint-Andries (Bruges), BELGIUM
PM1, PM2.5 and PM10 refer to particles with a particle diameter of 1 up to 10 microns and are among the most dangerous air pollutants. Because of their small size, PM1 & PM2.5 particles can penetrate deep into the human lung and cause a variety of health problems; for example by triggering asthma attacks or contributing to cardiovascular ...
Manufactured by:Greystone Energy Systems Inc. based inMoncton, NEW BRUNSWICK (CANADA)
The PMRMC Particulate Matter Sensor uses an optical sensor based on laser scattering principles and features innovative contamination resistance technology to perform highly accurate and reliable PM measurements. With a continuous-operation lifetime of more than 8 years, the sensor will provide long-term reliability and high ...
Manufactured by:ION Science Ltd. based inRoyston, UNITED KINGDOM
Environmental monitoring & smart city sensing technology. NextPM has been designed to meet the very highest performance standards in all applications. Featuring advanced technical specifications that enable ultra-precise measurements to be obtained, even in extreme climatic ...
Manufactured by:HCTM based inIcheon-si, SOUTH KOREA
The AirSensPM can be measured both indoors and outdoors using a light scattering method. The AirSensPM functions as a particle counter that measures particles in 16 channels and a measuring device that can measure PM1.0, PM2.5, and ...
Manufactured by:AVTECH Software, Inc. based inCutler Mill Warren, RHODE ISLAND (USA)
Monitor airborne particulate matter (PM) and temperature (-40°F to 257°F / -40 °C to 125 °C) with the Digital Particulate & Temperature Sensor. This digital sensor delivers highly accurate readings to help ensure air safety in environments where air quality can fluctuate rapidly, when used with any Room Alert ...
Manufactured by:Greystone Energy Systems Inc. based inMoncton, NEW BRUNSWICK (CANADA)
The PMOS Outside Particulate Matter Sensor uses an optical sensor based on laser scattering principles and features innovative contamination resistance technology to perform highly accurate and reliable PM measurements. The replaceable sensor measures particles of PM2.5 and PM10, with a continuous operation lifetime of more than ...
Manufactured by:Greystone Energy Systems Inc. based inMoncton, NEW BRUNSWICK (CANADA)
The PMDT Duct Particulate Matter Sensor uses an optical sensor based on laser scattering principles and features innovative contamination resistance technology to perform highly accurate and reliable PM measurements. The replaceable sensor measures particles of PM1.0, PM2.5, PM4.0, or PM10, with a continuous operation lifetime of ...
Manufactured by:Emsys Maritime Ltd based inAltrincham, UNITED KINGDOM
Our Emsys-PM platform is our combined Opacity (smoke density) and Particulate Matter (PM) sensor system. The Emsys-PM can be calibrated to monitor smoke density in line with growing class society environmental notations, to monitor and identify maintenance issues in diesel engines, to monitor in line with localised EPA visible smoke regulations, to monitor ...
Manufactured by:Cubic Sensor and Instrument Co., Ltd based inWuhan, CHINA
Automotive particulate matter sensor APMS-5000 is a laser particle sensor module for automotive application, which can measure PM2.5 concentration accurately and output in unit of μg/m directly via mathematical algorithm and scientific ...
Manufactured by:Cubic Sensor and Instrument Co., Ltd based inWuhan, CHINA
Automotive particulate matter sensor APMS-3302 is a laser particle sensor module for automotive application, which can measure PM2.5 concentration accurately and output in unit of μg/m directly via mathematical algorithm and scientific ...
Manufactured by:Lunar Outpost Inc. based inGolden, COLORADO (USA)
PM1.0/PM2.5/PM10: Range: 0~1000 μg/m³; Max Resolution: 1 ...