Show results for
Refine by
Peripheral Pump Equipment & Supplies
78 equipment items found
Premium
Manufactured by:M Pumps S.r.l. based inCorbola (RO), ITALY
CL MAG-M pumps range meets the requirements on custom-built solutions in the process industry, in the following areas: Chemical and pharmaceutical, transfer of aggressive, highly corrosive liquids, paper, food processing, plant engineering and construction. For all industries that choose a pumping leak-free and low maintenance for use continuous (abandon of mechanical seal ...
Manufactured by:Vossche based inDallas, TEXAS (USA)
QB peripheral pump is mainly composed of motor, water pump and sealing parts. The motor is single phase asynchronous type, and the brass impeller has peripheral structure. The single mechanical seal using ceramic/graphite/nitrile butadiene rubber works as the motive seal, and oil resistant rubber ring is used as the static seal ...
Manufactured by:SAWA Pumpentechnik AG based inDegersheim, SWITZERLAND
The peripheral pump is the right choice for all applications in which low flow rates and pulsation-free pumping against high pressure are required. The symmetrical design is suitable for both left and right ...
Manufactured by:New Milestone Group based inWenling, CHINA
Suitable for use with clean water that does not contain abrasive particles and liquids that are not chemically aggressive towards the materials from which the pump is made. Thanks to their reliability, the fact that they are easy to use and are economical, they are ideal for domestic use and in particular for distributing water in combination with small pressure sets and for the irrigation of ...
Manufactured by:Stac s.r.l. based inDuino Aurisna, ITALY
Pumps with peripheral impellers which allow to reach medium-high discharge heads with low powers. This pumps are particularly suitable for pumping and distributing water in domestic water supply systems, as well as providing water supply to high pressure water heating ...
Manufactured by:Calpeda S.p.A based inMontorso Vicentino, ITALY
Close-coupled peripheral pump (regenerative pump) with turbine impeller. Compact, patented construction with singlepiece motor casing and pump-side wall.Protected against water entering the motor from outside.CT: version with pump casing in cast iron.B-CT: version with pump casing in bronze (the ...
Manufactured by:Leo Group Pump(Zhejiang)Co.,Ltd. based inWenling, CHINA
Application: Can be used to transfer clean water or other liquids similar to water in physical and chemical properties. Suitable for lifting water from the well, sprinkling irrigation in garden, pressure boosting of running water, and supporting equipment ...
Manufactured by:Leo Group Pump(Zhejiang)Co.,Ltd. based inWenling, CHINA
Application: APm-F peripheral pump can be used to transfer clean water or other liquids which are similar to water in physical and chemical properties. It is suitable for small residential water supply systems, automatic water sprinkler systems, small air conditioner systems or supporting ...
Manufactured by:Linn-Pumpen GmbH based inSchalksmühle, GERMANY
Close-coupled peripheral pumps (regenerative pumps) with turbine impeller. T, TP: version with pump casing and lanter bracket in cast iron. B-T, B-TP: version with pump casing and lanter bracket in bronze (the pumps are supplied fully ...
Manufactured by:Streampumps based inTianjin, CHINA
The SDB series peripheral pumps offer the advantage of delivering high pressure while consuming relatively low power. They exhibit remarkably stable operating characteristics. These pumps are designed for the transfer of clean water and non-corrosive liquids, provided they are free from sand or other solid particles. Thanks to their reliability, ...
Manufactured by:Sea-Land Srl based inTorreglia, ITALY
The close-coupled pumps with peripheral impeller series BASIC have been designed to pump clean liquids, without abrasives and suspended solids, non-explosive or aggressive for the pump’s materials. Liquid temperature not higher than 35 °C for domestic use (CEI EN 60335-2-41) or 90 °C for other use, while the ambient ...
Manufactured by:Dab Pumps S.p.A. based inMestrino (PD), ITALY
Self-priming peripheral pump with star impeller, with agreat suction capacity. Cast iron body with brass ring.Motor support and impeller in brass to avoid the risk ofblocking. Driving shaft in stainless steel. Carbon/ceramicmechanical seal.Asynchronous, closed motor, cooled by external ventilation.Built-in thermal and current overload protection and acapacitor ...
Manufactured by:Streampumps based inTianjin, CHINA
The SQB series are peripheral pump, with peripheral impeller containing numerous radial blades in its edge, suitable for pumping clean water and chemically non-aggressive liquid. ...
Distributed by:Pedrollo Distribution Ltd. based inLichfield, UNITED KINGDOM
These pumps are suitable for handling clean water not containing abrasive particles, and fluids which are not chemically aggressive to the pump ...
Manufactured by:Om Murugan Industries | Torren Pumps based inCoimbatore, INDIA
TORREN Peripheral Pump is a product fitted with Thermal Overload Protector (TOP) to prevent burning with high grade ‘F’ class enameled copper wires that are suitable for wide voltage fluctuations. These pumps are developed and manufactured by the continuous efforts and innovation of our R&D Team with prime experience in ...
Manufactured by:Shimge Pump Industry Group Co.,Ltd. based inWenling City, CHINA
Performance Range: Max.Flow: 4.8m3/h Max. Head: ...
Manufactured by:Cadoppi S.r.l. based inMontecavolo (RE), ITALY
For handiling clear water with non abrasive parts and fluid non-chemical agressive - Feeding pressure systems - Tanks filing and emptying - For boosting insufficient mai water ...
Manufactured by:Vossche based inDallas, TEXAS (USA)
SQm peripheral water pump differs from QB series in the water inlet, left side for SQm series and front side for QB series. The other configurations and performances are the same for these two ...
Manufactured by:Fink Chem + Tec GmbH based inEchterdingen, GERMANY
If high process temperatures are required due to the process - for example when conveying hot fluids - or if the temperature is to be kept constant during the process, we equip the Flujo 01 peripheral gear pump with a heatable pump head. The simple design contains a heat transfer medium circuit between a thermostat or superheated steam connection ...
Manufactured by:CSF Inox S.p.A. based inMontecchio Emilia, ITALY
Thanks to the special design of the body and impeller and the absence of pulsations, these single-block peripheral impeller pumps are widely used for dosing liquids, in laboratory micro-systems, in-line measuring systems, spray systems and applications where medium-high heads and low flow rates are required. They are also used to transfer clean, non-abrasive ...