Refine by
Piezometer Groundwater Sampling Equipment & Supplies
15 equipment items found
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
The AMS “Piezometer Groundwater Sampling Kit” was designed in response to our clients’ need for a manually-operated sampling kit, capable of providing a semi-permanent sampling point for water level measurements and shallow groundwater sampling investigations. ...
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
Specifically designed for shallow groundwater investigations and long-term monitoring programs, this manually operated sampling kit is ideal for low-flow groundwater sampling and precise water level measurements up to 12 ft. (3.66 m) below ground surface. Built for rugged field conditions, this kit provides a semi-permanent access point for consistent, repeatable data collection across ...
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
The Geotech Geopump™ Peristaltic Pump Series II is an AC/DC combination. It has two pumping stations which can also be piggy-backed for multi-station pumping. The first pumping station has a variable speed of 30 to 300 RPM and the second station 60 to 600 RPM. It also comes equipped with a carrying case and battery. A peristaltic pump often is a good choice for obtaining samples collected ...
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
1-1/4" Expendable Tips are used instead of the SST Piezometer, to avoid any damage while hammering to target ...
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
The Piezometer Tee Jack Adapter is threaded to the Piezometer Slotted Pull Adapter which is then connected to a Big Foot Removal Jack in order to extract the system from below ground ...
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
The 1-1/4" X 3' SST Piezometer Extension w/ Coupler is used to reach deeper depths if needed when sampling with AMS's Piezometer. The male-to-male couplers are crucial for providing the same outside diameter the entire way down the drive string; allowing for an easier push and ...
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
This adapter is used to drive Piezometer sampling accessories by simply placing it over the Male-to-Male SST Piezometer ...
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
The Male-to-Male Stainless Steel Piezometer Coupler is used to connect the 1-1/4" X 14" SST Piezometer to 1-1/4" X 3' SST Piezometer Extensions. This coupler is crucial for providing the same outside diameter the entire way down the drive string; allowing for an easier push and ...
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
#50 Stainless Steel Mesh ...
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
The SST Piezometer Spring is an internal component to the 1-1/4" (outside diameter) X 14" SST Piezometer. This part can be removed and replaced within the Piezometer for proper decontamination in-between samplings, which is extremely ...
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
The Piezometer Point Holder holds the 1-1/4" Expendable Tip while driving or hammering to target ...
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
The Piezometer Slotted Pull Adapter is threaded to a 1-1/4" X 3' SST Piezometer Extension for tubing to be ran up and through. The Piezometer Tee Jack Adapter is then threaded to the Piezometer Slotted Pull Adapter to extract the system from below ground ...
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
Used as both a drop weight and sampling port, the GVP Dedicated Tip is connected to 3/16" (inside diameter) X 1/4" (outside diameter) Fluoropolymer or Poly Tubing via the Twist-to-Lock Connector, 3/16" Inner Diameter barbed adapter and lowered inside the ...
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
The SST Piezometer Screen #50 Mesh is an internal component to the 1-1/4" (outside diameter) X 14" SST Piezometer. This part can be removed and replaced within the Piezometer for proper decontamination in-between samplings, which is extremely ...
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
The 1-1/4" (outside diameter) X 14" SST Piezometer drive point can be connected to any 3' SST Piezometer Extension using heavy-duty single-lead threaded couplers. The male/male couplers are crucial for providing the same outside diameter the entire way down the drive string; allowing for an easier push and pull! Unlike other Piezometer designs with welded fittings, our Piezometer allows the ...