Refine by
Piezometer Point Equipment & Supplies
12 equipment items found
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
The Piezometer Point Holder holds the 1-1/4" Expendable Tip while driving or hammering to target ...
Manufactured by:Solinst Canada Ltd. based inGeorgetown, ONTARIO (CANADA)
The 615 Drive-Point Piezometers are cost-effective for initial site investigations, plume delineations, and as low-cost mini well points. They are excellent for groundwater or soil gas sampling, underground storage tank monitoring, and as sparge points. The stainless steel piezometer point has a ...
Manufactured by:Solinst Canada Ltd. based inGeorgetown, ONTARIO (CANADA)
The Model 615 ML Multilevel Drive-Point Piezometer system can provide several monitoring zones in one drive location. The 615 ML Ports have a dual barbed stem that allows the connection of either 3/8" OD or 1/4" OD tubing to create up to 3 or 6 monitoring zones, respectively. ...
Manufactured by:Solinst Canada Ltd. based inGeorgetown, ONTARIO (CANADA)
The 601 Standpipe Piezometer is excellent for taking water level measurements. The PVC tip is suitable for pushing into very loose sands at the base of a borehole, or for backfilling in place within test pits and pre-augered holes. It uses a porous polyethylene filter inside a perforated PVC tip which connects to the surface with 3/4" (19 mm) ID PVC ...
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
The 1-1/4" (outside diameter) X 14" SST Piezometer drive point can be connected to any 3' SST Piezometer Extension using heavy-duty single-lead threaded couplers. The male/male couplers are crucial for providing the same outside diameter the entire way down the drive string; allowing for an easier push and pull! Unlike other ...
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
The AMS “Piezometer Groundwater Sampling Kit” was designed in response to our clients’ need for a manually-operated sampling kit, capable of providing a semi-permanent sampling point for water level measurements and shallow groundwater sampling investigations. ...
Manufactured by:Aquadata based inSeyhan, TURKEY
To measure the variation in the level of the water table is useful by means of ready access for a measuring device. Driving a piezometer tip into some point below the natural water table allows the water to enter and rise up the access standpipe to stabilise at the water table level. Seasonal variations or variations due to irrigation can be measured by lowering ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
Micro-DiverCompact water level logger for Groundwater Monitoring. Easy to use water level logger. Perfect for pump and slug tests. Easy to install in small diameter wells. Available in various measuring ...
by:Dune Technologies, LLC based inGrand Rapids, MICHIGAN (USA)
Compact Datalogger for Groundwater Monitoring. Compact size: Ø 18 mm - length 88 mm, 48,000 records of time stamp, pressure and temperature, 30-Point Pressure Factory Calibration, Pre-programmed and user defined pumping ...
Manufactured by:ACE Instrument Co., Ltd. based inGyeonggi-do, SOUTH KOREA
As shown in the figure on the right, model 1500 VW multipoint piezometer is installed as several VW piezometer in one hole by layer. Even if it is perfectly shielded from bentonite, the piezometer on the top encounters with several signal cables, causing inevitable leakage due to the narrow shield ...
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
Specifically designed for shallow groundwater investigations and long-term monitoring programs, this manually operated sampling kit is ideal for low-flow groundwater sampling and precise water level measurements up to 12 ft. (3.66 m) below ground surface. Built for rugged field conditions, this kit provides a semi-permanent access point for consistent, repeatable data collection across ...
Manufactured by:Cascade Drilling based inBothell, WASHINGTON (USA)
They are capable of obtaining soil and groundwater samples, installing standard and pre-packed monitoring wells, and have geotechnical capabilities when equipped with 140 lb. hammer. They can drill and set piezometers, inclinometers, and vapor points; and support injection of a variety of remediation compounds. ...