Refine by
Pipe Flare Equipment & Supplies
38 equipment items found
Manufactured by:Callidus Technologies - part of UOP, a Honeywell Company based inTulsa, OKLAHOMA (USA)
High stability flame retention system allows the flare to bum during all types of weather conditions. The pipe flare is the most basic type of flare tip. It is sometimes called an “utility flare”. Pipe flares will not smoke when burning low carbon content gases. The ...
Manufactured by:Callidus Technologies - part of UOP, a Honeywell Company based inTulsa, OKLAHOMA (USA)
The Demountable flare system provides flexible flaring operations to so that you can place multiple risers on a single support structure. They also allow you to perform maintenance to the tip at grade with minimal use of personnel at elevation. The demountable flare system features a derrick with the riser or risers mounted in such a way to permit lowering the flare tip to grade for service ...
Manufactured by:Boshart Industries based inMilverton, ONTARIO (CANADA)
Nipple Specification ASTM A733. Thread Specification ANSI B.1.20.1. LIST PRICE PER UNIT. When ordering Black Nipples, Part No. starts with BLN-. PRICE CODE - W. CRN Number for Steel Nipples ...
Premium
Manufactured by:InduMar Products, Inc. based inHouston, TEXAS (USA)
Quickly plugs open-ended pipes, allowing you to instantly plug knocked-off pipes carrying water, fuel, chemicals and gas. Great for knocked-off gas meters and tank truck discharge ...
Manufactured by:TRIC Tools, Inc. based inOakland, CALIFORNIA (USA)
The 1″ Copper Nut is used when attaching a new 1″ copper line to be pulled in behind the 1″ Water Line Bursting Heads (such as TT-WDGE-1WED). The Copper Flaring Tool (TT-WDGE-CFT) is used to flare the new copper pipe before it is attached to the head using the 1″ Copper Nut. Be sure to put the nut on the new ...
Manufactured by:FlareTech Inc. based inStettler, ALBERTA (CANADA)
A utility flare stack is a fundamental type of open pipe flare used primarily for the combustion of waste gases. Its height is engineered to comply with safety regulations, ensuring proper dispersion of combustion products and minimizing ground level radiation, which is generally kept below 1500 BTU/hr/ft². The diameter is determined by the ...
Manufactured by:BD Environmental Solutions, a subsidiary of BD Group Industries based inSeminole, FLORIDA (USA)
Utility Flares; Pipe Flares are unassisted equipment designed to combust hydrocarbons where non-smokeless operation is environmentally acceptable or where the waste gases produce little or no smoke due to their ...
Distributed by:Star Equipment & Rental based inMt. Airy, GEORGIA (US) (USA)
Lightweight 2-stroke handheld blower for landscape clean-up jobs. 21.2cc professional-grade, 2-stroke engine, Light weight for ease-of-use, Grouped controls including cruise control for comfortable operation, Includes flared end pipe for moving wet ...
Manufactured by:Smitsvonk Holland B.V. - a member of the Durag Group based inZoetermeer, NETHERLANDS
Ignition of waste gas from pipe flares, air and steam assisted flares and ground flares For most flare systems the pilot burner can not be accessed for service. Maintenance or replacement is not possible while the flare is in operation.To safeguard operation, Smitsvonk's pilots provide reliable ...
by:EnviroPro, Inc. based inHouston, TEXAS (USA)
Sometimes referred to as steam assisted pipe flares, upper steam flares have a steam manifold near the top of the flare tip. The manifold distributes steam to nozzles surrounding the outside diameter of the flare tip, just above the flare tip exit. Steam injected into the combustion zone pulls ...
Manufactured by:Hero Flare LLC based inKellyville, OKLAHOMA (USA)
Flame Front Generators are a traditional method of lighting flare pilots. An FFG panel mixes plant air and fuel gas into an ignition chamber. A spark plug ignites the mixture. The 'flame front' travels through a 1' pipe to flare ...
Manufactured by:Europem N.V based inLier, BELGIUM
Utility Flares (Pipe Flares) are the most basic flare design available, to provide a robust, reliable and flexible solution for the flaring of large volumes of low pressure waste gas when smokeless operation is either not required or can be achieved without an assisting medium (like steam, air or gas). ...
Manufactured by:Shanghai Selvo Industrial Co., Ltd. based inShanghai, CHINA
Submersible jet aerator uses a submersible pump to generate high velocity water current, the water flows through a Venturi pipe and generates negative pressure, as a result the air will be sucked in through an air intake pipe and mixed with the water in a flaring pipe, then the air-water mixture will be sprayed out in high ...
Manufactured by:Tideflex Technologies - a Division of Red Valve Company, Inc. based inPittsburgh, PENNSYLVANIA (USA)
The CIL - Series 37 In-Line Flanged Check Valve is a simple, reliable, cost-effective solution for backflow prevention. The revolutionary design of the 37 is similar to the Series 35, but the Series 37 bill does not flare and is designed to be inserted into the downstream pipe and fastened between two mating flanges, eliminating the need for a valve body. Because ...
Manufactured by:Nuhn Industries Ltd. based inSebringville, ONTARIO (CANADA)
Built to withstand high speeds and increased fluid velocities and pressures produced by the Nuhn Header Series Pumps. The Nuhn 8" manure fill pipe is a great addition for any Nuhn ...
Manufactured by:H. Butting GmbH & Co. KG based inKnesebeck, GERMANY
Through a combination of state-of-the-art production technology, craftsmanship and long-standing experience we offer our customers customised components with particular ...
Manufactured by:Dinex A/S based inMiddelfart, DENMARK
Dinex designs and manufactures high quality clamps for connecting exhaust components. Our long-term experience enables us to provide custom designs tailored to suit your clamping requirements. We can offer high strength, low weight clamps for demanding applications such as those at elevated temperatures requiring gas-tight joints. Furthermore, we can give technical support in the form of product ...
Manufactured by:aquatechnik s.p.a. based inMagnago (MI), ITALY
Brass alloy fitting system, caps of PA-M and O-Rings of HNBR, only with multilayer pipes. Pending English certification, not yet available in the English market. Designed to give maximum protection to joints that are to be installed inside and outside of the walls. The Safety system is distinguished by two key ...
Manufactured by:American Cast Iron Pipe Company based inBirmingham, ALABAMA (USA)
The AMERICAN Fastite joint, furnished in sizes 4” to 64”, is a flexible, rubber ring compression-type joint used extensively in underground service for water, sewage or other liquids. It has the proven long-life and high-strength qualities inherent in pipe produced centrifugally in accordance with AWWA ...
Manufactured by:aquatechnik s.p.a. based inMagnago (MI), ITALY
Designed to give maximum protection to joints that are to be installed inside and outside of walls. The Safety system is distinguished by two key ...