Refine by
Applications
- Plasma Recycling System for Energy
- Plasma Recycling System for Forestry
- Plasma Recycling System for Metal Recovery
- Plasma Recycling System for Agriculture
- Plasma Recycling System for Heating Furnaces
- Plasma Recycling System for Building and Construction
- Plasma Recycling System for Petrochemistry
- Plasma Recycling System for Offgas
Plasma Heating Equipment & Supplies
36 equipment items found
Manufactured by:FCT Systeme GmbH based inFrankenblick, GERMANY
"Hybrid heating" is the combination of the FAST/SPS process with one or more heating systems, that normally influence the press tool systems from the outside. The thermal gradients of a standard FAST/SPS system, which are typically directed from the inside to the outside, can thus be compensated by the inversely directed gradients of the additional heating system. This further improves heating ...
Manufactured by:FCT Systeme GmbH based inFrankenblick, GERMANY
In this sintering process, the tool or component is heated in a direct current passage, alowing cycle times of a few minutes are possible. The use of direct current pulses results in an additional increase in sintering activity for many materials due to the processes that take place at the contact points of the powder particles (Joule heating, ...
Manufactured by:Phoenix Solutions Co. (PSC) based inPlymouth, MINNESOTA (USA)
The Water/Gas Manifold provides a central point to analyze and control the supply of torch cooling water and operating gas. It is custom-designed for each installation and built of high-grade stainless steel. To monitor cooling water and operating gas, PSC relies on top-of-the-line gauges and instruments from Sierra Instruments and ...
Manufactured by:Phoenix Solutions Co. (PSC) based inPlymouth, MINNESOTA (USA)
PSC works with every client to custom-design a Torch Manipulation System that meets the specific requirements for each environment and application. The controls for the manipulator are integrated into the HMI, giving operating technicians a single point of control over the entire ...
Manufactured by:Phoenix Solutions Co. (PSC) based inPlymouth, MINNESOTA (USA)
The Process Furnace is the vessel in which the plasma torch operates. Our expansive knowledge of plasma heating, combined with the legacy of FluiDyne Engineeing Corp as an industry leader in furnace design, makes us uniquely qualified to design and fabricate custom ...
Manufactured by:Plasmait GmbH based inLannach, AUSTRIA
PlasmaANNEALER is a continuous heat treatment machine for ferrous and non-ferrous wire, rod, tube, and strip. Plasma heat treatment can be used for annealing, stress relieveing or hardening applications. Inert atmosphere in PlasmaANNEALER is selected to provide simultaneous surface treatment such as surface degreasing and oxide ...
Manufactured by:Plasmait GmbH based inLannach, AUSTRIA
PlasmaANNEALER is a heat treatment machine for stainless steel and nickel alloy wire, rod, tube, rope, and strip. Plasma heat treatment can be used for annealing, stress relieving or hardening ...
Distributed by:S3 Instruments based in, ONTARIO (CANADA)
Features: Reduces oxides in the solder by irradiating hydrogen radicals having strong reducing power generated in H2 plasma when heating and melting solder bumps in order to enable formation of pure ...
Manufactured by:Plasmatreat GmbH based inElgin, ILLINOIS (USA)
RD1004 Rotary Jet – Ultrafine cleaning and plasma activation with low heat input; The RD1004 plasma rotary jet is used to generate cold plasma. It is especially suited for thermally sensitive and geometrically complex surfaces and materials. The patented rotary system evenly distributes the plasma effect on ...
Manufactured by:Fari Plasma based inShenzhen, CHINA
The AF-G40 Plasma Treatment Machine combined with a Rotating Platform is designed for advanced surface treatment applications. Having been refined over 12 years of dedicated research and development, this system provides plasma cleaning and treatment solutions for a variety of materials, including round substrates. It is instrumental in preparing hardware ...
Manufactured by:XP Power S.A. based inRungis Cedex, BELGIUM
The CB series is the culmination of 45 years of RF plasma and heating experience. We have taken the proven rugged design of the CX series power amplifier section and combined it with all the innovation in DC supplies and diagnostics to make a compact, stable RF power supply without compromising reliability for size. ...
Manufactured by:Sidrabe Vacuum, Ltd. based inRiga, LATVIA
Metal and alloy coatings: Cu, Ag, In, Ti, Ni, Mo, Cr, NiCr, St.St , NiCo etc. Oxides and nitrides: SiO2, TiO2, TiN, Si3N4 etc. p-i-n structures. Preliminary drying using different heating techniques. Plasma pre-treatment by ion and magnetron sources. Vacuum lamination of web ...
Manufactured by:Meyer Burger based inGwatt (Thun), SWITZERLAND
It can be adapted to RIE, PVD and PECVD and can process different substrate sizes up to 200 mm / 300 mm in diameter. The modular concept of MicroSys 200 / MicroSys 300 allows a customized setup of plasma sources and sample heating or ...
Manufactured by:Barkey Gmbh & Co KG based inLeopoldshöhe, GERMANY
The Barkey plasmatherm is the innovative and user-friendly solution for warming standard blood and plasma bags. The patented heat technology allows dry warming and thawing of Fresh Frozen Plasma (FFP), erythrocyte concentrates (EK) as well as cryopreserved preparations (stem cells etc.) and infusion ...
Manufactured by:Plasmait GmbH based inLannach, AUSTRIA
Plasmait uses proprietary patented plasma technology for heat and surface treatment of various materials. Plasmait solutions have been utilized in continuous (wire, tube, strip) and batch production on a wide range of ...
Manufactured by:P&P Optica Inc. based inWaterloo, ONTARIO (CANADA)
Laser Induced Breakdown Spectroscopy measures the atomic emission of samples. A laser pulse is used to generate a plasma burst from the sample. The atoms in the super heated plasma emit photons which are then analyzed with an optical spectrometer. LIBS measures mostly atomic emission lines, but the appearance of these lines is greatly affected by ...
Manufactured by:JEMA based inLouvain-la-Neuve, BELGIUM
Plasma can be generated in several ways for various processes and applications. Our tailor-made solutions intervene in the powering of plasma torch. High heat process: A thermal plasma torch is generally powered by a DC power supply from few tens of kW up to several MW. A gas is pushed through the torch and transits inside ...
Manufactured by:Realta Fusion Inc. based inMadison, WISCONSIN (USA)
Realta Fusion Inc. has pioneered a revolutionary approach in the realm of fusion energy through their right-sized system design, which is both compact and scalable, aimed at efficiently decarbonizing industrial heat and power. The system employs a magnetic mirror fusion concept, confining plasma between two high-field superconducting magnets. This technique ...
Manufactured by:Deposition Technology Ltd. based inLivingston, UNITED KINGDOM
The EVOS PVD system utilises the latest technology to deliver the best performance, robust reliability and lowest cost of ownership in its class, all packaged into a very small footprint. The EVOS is easily configurable and changeable between 100mm, 125mm,150mm and 200mm wafer ...
Manufactured by:Magellan Aerospace based inMississauga, ONTARIO (CANADA)
Magellan Aerospace specializes in the manufacture and supply of aeroengine shafts and helicopter drive shafts, as well as other flight safety critical machined components, including discs, seals, and spacers. In this niche, yet highly competitive market, we utilize many unique processes to manufacture shafts for both the hot and cold sections of a gas turbine engine. Shafts up to 120 inches long ...