Refine by
Porometry Equipment & Supplies
9 equipment items found
Manufactured by:Porometer a Division of Aptco Technologies Nv based inNazareth, BELGIUM
The POROLUX™ 100, 200 and 500 are gas liquid porometers based on the pressure scan method developed for the rapid measurement of through-pores in materials such as filters, nonwovens, textiles, paper, membranes, hollow fibres, ...
Manufactured by:Porometer a Division of Aptco Technologies Nv based inNazareth, BELGIUM
The POROLUX™ 50 is our newly developed first bubble point (FBP) tester, and is used to detect only the largest pores (FBP) in filtration and separation media. With a pressure going up to 5 bar (75 PSI), the instrument is able to detect pores down to 0.1 µm. ...
Manufactured by:Porometer a Division of Aptco Technologies Nv based inNazareth, BELGIUM
The POROLIQ 1000 is a Liquid Liquid Porometer (LLP). This rapid, precise method employed by the POROLIQ™ 1000 allows for testing of pore size down to 2nm and, compared to other techniques, uses lower pressures for characterisation of traditional micro-, nano-porous ...
Manufactured by:Porometer a Division of Aptco Technologies Nv based inNazareth, BELGIUM
ThePOROLUX 1000series comprises research grade gas liquid porometers for the rapid measurement of through-pores in porous materials based on the pressure step/stability method. The target pressure is achieved by combining an inlet valve for the gas, which generates the initial pressure, and a specially designed needle valve, which subsequently adjusts very precisely the pressure. The pressure and ...
Manufactured by:Porometer a Division of Aptco Technologies Nv based inNazareth, BELGIUM
Also, it has to be chemically inert and should not cause swelling of the sample. In many cases, the best results are obtained by using fluorinated hydrocarbons. These liquids have low surface tension (around 16 dyn/cm) and low vapour pressures, which minimises any potential evaporation during the measuement. Sometimes silicone oils are used. They have a high viscosity, a low surface tension and a ...
Manufactured by:Aqua Free GmbH based inHamburg, GERMANY
MF 1.0 mm hollow fiber membranes with log 7 retention for ...
Manufactured by:Aqua Free GmbH based inHamburg, GERMANY
MF 0.8 mm hollow fiber membranes with log 7 retention for bacteria. High performance micro-filtration membranes, delivering microbiologically safe water for high flow ...
Manufactured by:Topas GmbH based inDresden, GERMANY
The Capillary Flow Porometer PSM 165 provides a means of mercury free and non-destructive characterising of porous materials with regard to their pore size distribution (membranes, ceramics, nonwovens, sinter metalls, …) on basis of ASTM D6767, ASTM F316-03, ISO 2942, ISO 4003. The test is conveniently supported by a PC with user-friendly control software PSMWin. ...
Manufactured by:Aqua Free GmbH based inHamburg, GERMANY
UF 1.0 mm hollow fiber membranes with log 4 retention for Virus. High performance ultra-filtration membranes, delivering microbiologically safe water for high flow ...