Refine by
Power Resistor Equipment & Supplies
34 equipment items found
Manufactured by:Nikkohm.Co.,Ltd based inAomori, JAPAN
Features and Applications 35W high power resistors in TO263 (D2-PAK) style surface mount mold package. Non-inductive design suits high frequency applications and high-speed pulse circuits. Low, 3.3 °C/W heat resistance from resistor hot spot to flange and long life performance are presented with thin film metallization technology and ...
Manufactured by:Nikkohm.Co.,Ltd based inAomori, JAPAN
Features and Applications 35W high power resistors in TO263 (D2-PAK) style surface mount mold package with matte Tin plated flange. Non-inductive design suits high frequency applications and high-speed pulse circuits. Low, 3.3°C heat resistance from resistor hot spot to flange and long life performance are presented with thin film ...
Manufactured by:Filnor Inc based inAlliance, OHIO (USA)
When a drive unit is attempting to rapidly brake a motor “Deceleration Braking Cycle” or when an “overhauling load” condition exists, the spinning motor acts as a ...
Manufactured by:Filnor Inc based inAlliance, OHIO (USA)
Neutral Grounding Resistors are used to protect power transformers, power generators, and other associated equipment in your power systems against 50/60 Hz faults (short circuit) and transient phenomena ...
Manufactured by:Zealway Electronics based inKaohsiung, TAIWAN
PRECISION POWER RESISTORS Aluminum Housed (Chassis Mount): FEATURES: High power rating, small size and ultra precision. Standard winding & non-inductive winding types. High stability, strong ...
Manufactured by:Zealway Electronics based inKaohsiung, TAIWAN
High resistivity to heat, small resistance temp coefficient and the change in resistance with temperature being linear. Resistance value unchanged after long use, good resistivity to short time overload. multi-terminal types and adjustable types available. Insulation:>500V, 20MΩ. Load: ...
Manufactured by:Zealway Electronics based inKaohsiung, TAIWAN
The power that the resistor can dissipate depends on the operating temperature. For operation at ambient temperature in excess 70? the load should be derated in accordance with figure of Derating Curve. ...
Manufactured by:Nikkohm.Co.,Ltd based inAomori, JAPAN
Features and Applications Very small size, low profile, right weight, TO252 style, SMD surge protection power film resistors. -55°C to +175°C temperature range provides for automotive applications. Low thermal resistance under 1.0 °C/W shows excellent cooling performance. Easy to replace TO252 D-PAK power resistor. ...
Manufactured by:AdValue Technology based inTucson, ARIZONA (USA)
Aluminum Nitride Substrates are also available for electronic applications, microwave devices, LED lighting technology and power resistor ...
Manufactured by:JUNXY (HK) ENERGY CO., LTD based inBao`an, CHINA
That is, for each kilowatt of load applied to the generator by the load bank, an equal amount of electrical energy converts to heat by power resistors, in a general way, this heat must be dissipated from the load bank by air forced means or other convection. The JUNXY's resistors are made by high quality finned tubular heating elements, they ...
Manufactured by:Shenzhen Jensonn Power Equipment Co., Lt. based inShenzhen, CHINA
Resistive load bank is a device which can simulate the real-life resistive loads and provides a ngorous test regime for power supplies from ikW to 3000kW. The "load" of a resistive load bank is created by the conversion of electrical energy to heat by power resistors. It mainly used to test and maintenance of Engine Generators, Storage Battery ...
Manufactured by:ZIEHL industrie-elektronik GmbH + Co KG based inSchwäbisch Hall, GERMANY
PTC-resistor temperature sensor, screw-in sensor in Housing G2 (M4). PTC-resistor temperature sensors (also called PTC-resistors or thermistors) are temperatur dependent semiconductor resistors whose main function is to alter their electrical resistance drastically when their body temperature reaches the nominal trip temperature ...
Manufactured by:ZIEHL industrie-elektronik GmbH + Co KG based inSchwäbisch Hall, GERMANY
PTC-resistor temperature sensor, screw-in sensor in Housing G3 (M6). PTC-resistor temperature sensors (also called PTC-resistors or thermistors) are temperatur dependent semiconductor resistors whose main function is to alter their electrical resistance drastically when their body temperature reaches the nominal trip temperature ...
Manufactured by:ZIEHL industrie-elektronik GmbH + Co KG based inSchwäbisch Hall, GERMANY
Triple PTC-resistor, PTFE-insulated strand Cu, silver-plated, Lead length: 500-180-180-500 ± 10 mm, Stripping of lead ends 10 mm, standard cross-section: 0.14 mm2 (AWG 26), weight: approx. 3,6 g. PTC-resistor temperature sensors (also called PTC-resistors or thermistors) are temperatur dependent semiconductor resistors ...
Manufactured by:ZIEHL industrie-elektronik GmbH + Co KG based inSchwäbisch Hall, GERMANY
Single PTC-resistor, PTFE-insulated strand Cu, silver-plated, Lead length: 500 ±10 mm, Stripping of lead-ends 10 mm, standard cross-section: 0,14 mm2 (AWG 26), weight: approx. 2,6 g. PTC-resistor temperature sensors (also called PTC-resistors or thermistors) are temperatur dependent semiconductor resistors whose main ...
Manufactured by:Tacuna Systems, LLC based inGolden, COLORADO (USA)
The ANYLOAD A2P and A2P-D2 strain gage amplifiers offer reliable signal conditioning for load cells and transducers, capable of directly driving up to 2 x 350Ω load cells or up to 8 load cells via a junction box. Housed in a PVC enclosure, these DC-powered amplifiers feature adjustable resistors and can be easily installed on a standard rail channel. They ...
Manufactured by:Transducer Techniques, LLC based inTemecula, CALIFORNIA (USA)
The units can be operated next to the sensor with 4-wire hookup or at distances up to 1 km (3300 feet) with 6-wire hookup. An onboard 87.325 kO resistor allows easy shunt calibration at the push of a button. Provision is also made for a user-furnished calibration resistor. Power requirements are 11.8 to 26V DC with load currents from 10 to 60 mA. ...
Manufactured by:KL-Maschinenbau GmbH & Co. KG based inRendsburg, GERMANY
This new EGGERS dynamometer is produced by the manufacturer of the already well-known EGGERS dynamometer: KL-Maschinenbau. Like all other test benches of the manufacturer, it is designed and manufactured in ...
Manufactured by:Shenzhen Union Tenda Technology Co., Ltd. based inGuanlan, Longhua, CHINA
LE series thermal grease has good thermal conductive performance and reliability and can wet the surface of copper and aluminum which is extremely suit for the heat transfer of the CPU, GPU and other heating power components.As LE series has low adhesion, can fully wet the surface,form very low surface thermal resistance,it can quickly transfer the heat to cooling device. Just paste the grease ...
Manufactured by:Transducer Techniques, LLC based inTemecula, CALIFORNIA (USA)
The LCA-9PC Module provides low-cost, dedicated signal conditioning for a single bridge type load cell or torque sensor. Model LCA-9PC comes with DB9 male and female connectors, which require soldering to user-furnished mating female or male wire connectors. On- board jumper selections include sensitivities from 0.5 mV/Vto 10 mV/V, bandwidths from 100 Hz to 30 kHz, and amplified outputs of 0 to ...