Refine by
Applications
Process Energy Optimization Equipment & Supplies
69 equipment items found
Premium
Manufactured by:LAND® based inDronfield, UNITED KINGDOM
The LAND Slag Detection System (SDS V2) delivers improved yields, higher-quality steel and reduces costly downstream processing. There are additional benefits in reduced ladle refractory ...
Premium
Manufactured by:Dosch Messapparate GmbH based inBerlin, GERMANY
Orifice plate according to ISO 5167 – Your reliable and cost-effective choice for flow measurement. Rely on orifice plates according to ISO 5167 for precise flow measurement of fluids in pipelines. An orifice plate is characterized by its sharp-edged inlet, generating a defined differential pressure used to calculate the volumetric or mass flow rate. The orifice plate coefficient of ...
Manufactured by:Clauger based inErstein, FRANCE
The SMO Spiral Tunnel, a product Made in Clauger, allows for either continuous or in-line cooling or deep-freezing of products. This interest lies in its automation of processes, optimization of energy usage, and increase in ...
Manufactured by:Van Aarsen International B.V. based inPanheel, NETHERLANDS
Sieving of raw materials may take place at the beginning of the process or after pelleting and crumbling and is intended to separate sizes. By sieving the raw materials first, the grinding process is optimized and energy can be saved. Smaller sizes do not need to be grinded. By sieving pellets and crumbles fines are sorted out, ...
Manufactured by:akYtec GmbH based inHannover, GERMANY
The akYtec SPC210 integrates the functionalities of a Programmable Logic Controller (PLC) and a Human-Machine Interface (HMI) into a single device, effectively streamlining system architecture, reducing hardware requirements, and optimizing operational workflows. This compact design conserves valuable space in automation cabinets and allows for more flexible installations, ...
Manufactured by:TMC Fluid Systems, Inc. based inTustin, CALIFORNIA (USA)
In recent years, the need for a blower to delivery larger flow rates at higher differential pressure has become an essential requirement in many ...
Manufactured by:Vapor Technologies, Inc. based inLongmont, COLORADO (USA)
The Cadence system is a compact and efficient magnetron sputtering system specifically designed to deliver high-performance coatings across a variety of industrial applications. Utilizing the proprietary Remote Anode Assisted Magnetron Sputtering (RAAMS) process, this system achieves high deposition rates, enhancing wear resistance, reducing friction, and improving heat resistance and product ...
Manufactured by:Excellence Consultants based inNavi Mumbai, INDIA
This unique configuration continually agitates the bed contents with an agitator in addition to fluidization with air, preventing lump formation and eliminating the need for intermittent raking. The incorporated Agitated Fluidization allows for greater operational flexibility, handling process variations with improved energy efficiency. Specifically designed for ...
Manufactured by:ShangHai Naut Steel Belt Systems Co., Ltd. based inShanghai, CHINA
NAUT is an early developing steel belts type continuous pressing system company at home and abroad. The system can be widely used in areas such as casting, molding and laminating. The whole production system of steel belt is detailed and includes heating, reaction, pressure, thickness, cooling and other processes, thereby helping it to achieve efficient processing, reducing the energy ...
Manufactured by:Sistema AZUD, S.A. based inAlcantarilla, SPAIN
These systems adapt to installations in which the pressure conditions are a limiting to the rest of self-cleaning systems, reducing the consumed water on the backflushing and maintenance and the pressure, optimizing the filtration process and improving the energy cost of the ...
by:Swedish Exergy AB based inGothenburg, SWEDEN
Exergy Air Stream Dryer is a semi-closed, low temperature dryer designed as stand-alone dryer or as a pre-dryer together with Superheated Steam Dryer (SHSD) for two stage drying. The drying air is indirectly heated in a heat exchanger using heating media such as low pressure steam, flue gases, hot water etc. Wet product is fed into the dryer via an air lock. The product is transported and dried ...
Manufactured by:Gleeble, brand of Dynamic Systems Inc. based inPoestenkill, NEW YORK (USA)
The Gleeble 563 is a highly versatile and performance-focused research tool tailored for thermal mechanical simulation (TMS) in metallurgy research. As the most advanced member of the Gleeble 500 Series, it offers a compact and economical solution while retaining world-class capabilities. The system allows precise reproduction of thermal and mechanical processes in a lab setting, aiding in the ...
Manufactured by:Mesys Industrial Air Systems BV based inHerwen, NETHERLANDS
A completely new technology in waste processing is the splitting of duckweed into cellulose, oil or biofuel. The installation which Mesys developed for this purpose helps water companies to scoop out 750,000 tonnes duckweed from their waters. The water companies are currently still paying for the disposal, but soon, the duckweed will be processed and will provide income. Mesys is working on the ...
Manufactured by:Nikkiso Cryogenic Industries based inTemecula, CALIFORNIA (USA)
Hydrogen liquefaction is a key enabling technology for storing the lightest element on earth economically. As a liquid, this versatile energy carrier can be distributed efficiently. With over 60 years of cryogenic process plant experience and over 450 process plants successfully installed globally, Nikkiso Cosmodyne is pleased to launch the BALSA Series Hydrogen Liquefiers with three ...
Manufactured by:Sistema AZUD, S.A. based inAlcantarilla, SPAIN
The AZUD HELIX AUTOMATIC range of filters offers multiple combinations to achieve an efficient and economic filtration solution, which can be adapted to various water conditions in the industrial, municipal, environmental, agricultural and landscaping ...
Manufactured by:Heze Hualan Machinery Co,.Ltd based inHeze City, CHINA
The straw compressor baler through hydraulic system, is mainly used to compress and pack loose materials such as straw for easy storage and ...
Manufactured by:Air Industrie Thermique España, S.L. (AITESA) based inMadrid, SPAIN
Recover waste heat from the WHRB exhaust gas steam and Fired Heaters. The three heat transfer mechanisms are: conduction, convection and radiation. Recover residual heat from a hot current with a high content of potential energy and putting that energy into use increases the total efficiency of the process. Using this improvement, energy consumption in plants can decrease with consequential ...
by:Groupe Alphard based inMontréal, QUEBEC (CANADA)
Process engineering and design. Industrial equipment sizing (pumps, tanks, filters, reactors, heat exchangers,etc.). Technical expertise as a third party. Piping design. Process diagrams (PFD & P&ID). Process optimisation. Energy efficiency optimisation. Mass and energy balance. Feasibility studies. Process control strategies ...
Manufactured by:HSM GmbH Co. KG based inFrickingen, GERMANY
For industrial applications with special requirements: 4-fold strapping for optimised bale result. Particularly suitable for cardboard, paper and foils and also for compressing DSD goods, UBC and PET bottles. Also suitable for materials with bulk weights higher 60 kg / m³. Optimised bale dimensions and bale weights for efficient truck loading. Large loading apertures, quick mode of ...
Manufactured by:HSM GmbH Co. KG based inFrickingen, GERMANY
For industrial applications with special requirements: 4-fold strapping for optimised bale result. Particularly suitable for cardboard, paper and foils and also for compressing DSD goods, UBC and PET bottles. Also suitable for materials with bulk weights higher 60 kg / m³. Optimised bale dimensions and bale weights for efficient truck loading. Large loading apertures, quick mode of ...