Refine by
Riser System Equipment & Supplies
54 equipment items found
by:Subsea7 based in, LUXEMBOURG
Riser Systems that meet the ever-increasing challenges of deepwater and harsh environments.Our aim is to maintain our industry leadership in riser systems through the continuous development of our existing solutions and with the addition of new riser concepts. Subsea7's riser portfolio includes ...
Manufactured by:Floppy Sprinkler (Pty) Ltd based inNelspruit, SOUTH AFRICA
The unique Floppy Sprinklers versatile design allows for a further installation option: A short riser or tall riser system ideal tor vegetables, sugarcane, bananas and other ...
Manufactured by:Asiatic Fire System Pte Ltd. based inSingapore, SINGAPORE
A KILLFIRE Dry Riser Systems provide fire protection for high rise buildings, where main pressure are not sufficient in normal fire fighting application. Systems are installed in staircase or other uitable location, with each riser valve on each floor and inlet breeching of either 2-way or 4-way at ground level to enable fire ...
Distributed by:MSC Fire based inDublin, IRELAND
A full range of inlet breechings, landing valves and cabinets for wet and dry rising mains ...
by:Future Drilling Equipment Inc. (FDE) based inColmesneil, TEXAS (USA)
FDE is a leader in Riser Tensioning systems for offshore Tension Leg ...
by:TSC Subsea Limited based inMilton Keynes, UNITED KINGDOM
ARTEMIS® is a subsea external pipeline and riser inspection system that inspects subsea pipelines and risers with measurement capabilities exceeding existing alternative technologies. It is deployed on a remotely operated vehicle (ROV) to inspect subsea pipelines to assess their internal condition. ...
Manufactured by:InnetiQs GmbH based inStutensee, GERMANY
InnetiQs specializes in developing advanced robotic inspection systems for marine drill risers. These systems conduct comprehensive length scans of main pipes, kill lines, choke lines, and booster lines using electromagnetic MagControl technology. This technology enables high detection capabilities through heavy pipe walls, allowing for dry ...
Manufactured by:AGF Manufacturing, Inc. based inMalvern, PENNSYLVANIA (USA)
AGF's RiserPACK Model 8000 is a pre-assembled floor control assembly designed to meet NFPA 13D requirements for residential fire sprinkler systems. This model includes a flow switch, Inspector'sTEST Model 3011BV, and a Model 7500 pressure gauge. Available in sizes ranging 1" - 2", orifice sizes 3/8" (K2.8) - 5/8" ELO (K11.2), and thread x thread, thread x groove, or groove x groove ...
Manufactured by:AGF Manufacturing, Inc. based inMalvern, PENNSYLVANIA (USA)
The AGF RiserPACK Model 8000 commercial riser is a pre-assembled floor control assembly for fire sprinkler systems meeting NFPA 13 requirements. A flow switch, TESTanDRAIN Model 2511, Model 7600 3-way universal valve, and a Model 7500 pressure gauge are assembled to a bronze or steel body. ...
Manufactured by:Pancera Tubi e Filtri Srl based inSan Benedetto, ITALY
Easy Pump System results from the perfect combination of experience and technical application; it is a system that makes handy, efficient and fast the connection between PVC riser pipes and submersible pump. The EASY PUMP SYSTEM makes use of a PVC pipe supplied with a previously installed PVC sleeve at one edge and an inox ...
Manufactured by:Viking Group, Inc. based inCaledonia, MICHIGAN (USA)
Viking EasyPac Floor Control Riser Manifold Assemblies are available in sizes 1-1/4”, 1-1/2”, 2”, 2-1/2”, 3”, 4”, 6” and 8” for commercial use, in high rise buildings requiring floor control assemblies. They are available with an AGF TESTanDRAIN valve, and/or pressure relief valve (PRV) to meet NFPA 13 requirements for gridded ...
Manufactured by:Viking Group, Inc. based inCaledonia, MICHIGAN (USA)
Viking EasyPac Commercial Riser Manifold Assemblies are available in sizes 1-1/4”, 1-1/2”, 2”, 2-1/2”, 3”, 4”, 6” and 8” for commercial systems. They are available with an AGF TESTanDRAIN valve, and/or pressure relief valve (PRV) to meet NFPA 13 requirements for gridded systems and any ...
Premium
Manufactured by:FIBERSCOPE.net based inWinnipeg, MANITOBA (CANADA)
The TRACER X5-300 Sewer Inspection Robot is a versatile robotic sewer camera for inspecting sewer pipes and underground structures in high resolution imagery. Thanks to the interchangeable wheels and camera elevator riser this inspection system is able to inspect sewer lines from 12" to 120" in diameters and the automatic cable reel supplies 300M (984ft) of ...
Manufactured by:Asiatic Fire System Pte Ltd. based inSingapore, SINGAPORE
KILLFIRE Breeching Inlets are installed in front of building where fire engine are accesible to feed water into riser systems via their Ø21/2” fire hoses. Riser systems of Ø150mm are installed with a 4 way breeching inlet that are manufactured and tested BS ...
Manufactured by:Encore Thermoengineering S.R.L. based inMilano, ITALY
Derrick Guy-wired structure can be a good technical-commercial compromise for installation of flare packages very high in case of large clearance around the area and the need of a derrick structure to support the risers systems. The height of this type of flare can be even more than 200 ...
Manufactured by:Infiltrator Water Technologies, LLC. based inOld Saybrook, CONNECTICUT (USA)
EZset Lids and Risers by Infiltrator are made from glass reinforced polypropylene, providing superior strength and durability. They come in green or black and in 20”, 24”, and 30” diameters making them ideal for use with any concrete or plastic tank. The slip resistant lids are fastened using stainless steel screws and can be further secured by installing ...
Manufactured by:Infiltrator Water Technologies, LLC. based inOld Saybrook, CONNECTICUT (USA)
TW-Risers by Infiltrator are made from glass-reinforced polypropylene, providing superior strength and durability. Available in green or black with a 24-inch diameter, making them ideal for use with any concrete or plastic tank. The slip-resistant lids are fastened using stainless steel screws and are further secured by indexing structural ribs, that lock the ...
Manufactured by:Leachator Pumping Systems, Inc. based inAshland, VIRGINIA (USA)
Pressure transducers are typically used in sideslope riser systems as well as in holding tanks and load out applications. The transducer body is 316 stainless steel. A diaphragm senses pressure based on the height of the liquid above the transducer. This pressure sensing is converted into a 4-20mA analog signal and displayed on the level control – typically ...
by:4Subsea based inAsker, NORWAY
Reduce your flexible riser costs. 4Subsea’s annulus monitoring solution AMOS™ provides safe and cost-effective operation of flexible risers. The system monitors the riser annulus diffusion rate, detecting early signs of riser failure, reducing risk and averting potential costly replacement of ...
Manufactured by:Oilgear based inTraverse City, MICHIGAN (USA)
The ARV-H provides the core functionality of the industry-standard Olmsted Electro-Hydraulic valve without a complex control system. And for your convenience, it can be retrofitted onto any existing riser tensioning system. Including direct or wireline systems. When you need protection for your operations, you need the ARV-H. ...