Refine by
Sample Introduction System Equipment & Supplies
35 equipment items found
Manufactured by:SPECTRO Analytical Instruments GmbH - AMETEK, Inc based inKleve, GERMANY
The modular mounted sample introduction systems enable easy access and offer the possibility to customize components for specific applications. Some of the selections include; concentric glass nebulizers, cross flow nebulizers, ML nebulizers and parallel path PTFE nebulizers. Spray chambers include; Scott type glass and HF resistant chambers, ...
Manufactured by:Teledyne CETAC Technologies based inOmaha, NEBRASKA (USA)
When coupled to a compatible autosampler, the ASXPRESS PLUS Rapid Sample Introduction Accessory minimizes times for sample delivery, stabilization, and washout with ICP-AES or ICP-MS. The result is increased sample throughput by up to 5 times or more. In addition, the ASXPRESS® PLUS reduces costs from argon, power, ICP-AES ...
Manufactured by:Elemental Scientific (ESI) based inOmaha, NEBRASKA (USA)
Elemental Scientific introduced the new oneFAST high throughput sample introduction system at Pittcon 2008 in New Orleans. oneFAST extends the high throughput and fast-washout features of the popular SC-FAST system to non-ESI autosamplers. Laboratories currently using Cetac, Perkin Elmer, or Varian autosamplers, as well as ESI SC ...
Manufactured by:Elemental Scientific (ESI) based inOmaha, NEBRASKA (USA)
The new prepFAST S is an ultraclean automated sample introduction system for direct analysis of high purity chemicals by ICPMS. The prepFAST S uses inline syringe-driven flows of UPW, high purity HNO3 and standard spike to automate sample and standard preparation.The ICPMS may be calibrated using either external autocalibration ...
Manufactured by:Joint Analytical Systems GmbH (JAS) based inMoers, GERMANY
Reproducible results with low Relative Standard Deviations (RSD; measured in percent) are two main aspects of modern gas analysis. Fundamental is the gas sample injection at reproducible and controllable volumes, pressures and temperatures. This is especially challenging in cases where one GC system is required to handle samples coming from different sample containers and where the sample ...
Manufactured by:Joint Analytical Systems GmbH (JAS) based inMoers, GERMANY
The JAS GBS allows automated sampling of gases, stored in tedlar bags or gas sampling balloons, as well as gas cylinders, e.g. calibration gas cylinders. Sample transfer is carried out via a multi-position valve. Each gas sampling inlet is equipped with an in-line filter to avoid multi-position valve blocking. Connection to the GC can be made by means of 1/16” SS tube. The GBS is controlled ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
Metrohm Inline Sample Preparation (MISP) puts an end to manual sample preparation for ion chromatography. MISP stands for methods developed by Metrohm that allow you to fully automate the preparation of even the most challenging samples. Not only will you increase sample throughput but also improve accuracy and reproducibility of analyses and ...
Manufactured by:Teledyne CETAC Technologies based inOmaha, NEBRASKA (USA)
The compact and efficient design of the ASX-280 Two-Rack Autosampler preserves precious laboratory bench space. Ideal for low to medium volume sample applications, these autosamplers provide all of the fully automated features of a CETAC Autosampler in compact, easy to use sample introduction ...
Manufactured by:Zhejiang Aijiren, Inc. based inQuzhou City, CHINA
Aijiren screw thread top sample vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called an autosampler vial. And this sample vial is extremely compatible.The 1.5ml sample vial we usually say is the ...
Manufactured by:Teledyne CETAC Technologies based inOmaha, NEBRASKA (USA)
Teledyne CETAC offers the IsoMist Programmable Temperature Spray Chamber from Glass Expansion. The IsoMist provides the benefits of a temperature-controlled ICP sample introduction system in a compact, convenient ...
Manufactured by:Glass Expansion based inPort Melbourne, AUSTRALIA
The extreme sensitivity of the ICP-MS technique demands exceptional purity in all sample introduction components. This is why we have developed a new range of PFA spray chambers for ICP-MS. The PFA44 spray chamber can be teamed with the OpalMist PFA nebulizer to form the highest purity, most inert sample introduction ...
Manufactured by:Specac based inOrpington, UNITED KINGDOM
For routine diffuse reflectance sampling, the Minidiff™ Plus is the ideal accessory of choice. High performance solids analysis is made simple through a minimal alignment optical system. Solid sampling versatility is maintained through the use of standard sampling cups and Diabrase abrasive sampling pads. ...
Manufactured by:SVT Associates, Inc. based inEden Prairie, MINNESOTA (USA)
SVT Associates' NorthStar™ Atomic Layer Deposition (ALD) system is a versatile research deposition tool for thermal or energy enhanced ALD. With up to 8 precursor lines and a hot wall — cross flow deposition chamber, a wide range of applications may be performed from a single system. Sample introduction is rapid and ...
Manufactured by:Teledyne FLIR LLC based inWilsonville, OREGON (USA)
The Griffin 460 mobile gas chromatograph mass spectrometer (GC/MS) enables innovative multi-modal sample introduction to detect and identify complex chemical samples, 24 hours a day, 7 days a week. The instrument is able to accept liquid, solid and vapor samples as well as provide continuous, direct air monitoring. The Griffin ...
Manufactured by:FIAlab Instruments, Inc based inSeattle, WASHINGTON (USA)
More features and improved performance define the next generation of autosampler from Teledyne CETAC Technologies. The compact ASX-280 Autosampler builds upon the reliability of its predecessors with latest generation electronics, improved accessory interfaces, enhanced pumping capabilities, easier serviceability, and a sleek new ...
Manufactured by:Teledyne CETAC Technologies based inOmaha, NEBRASKA (USA)
Double Your Sample Capacity; XLR-860 Extended Rack AutosamplerA complete 8 rack autosampler that holds up to 720 samples and 10 standards, freeing valuable personnel from the task of manual sample manipulation. More features and improved performance define the next generation of autosampler from Teledyne CETAC Technologies. The high capacity XLR-860 Extanded Rack Autosampler builds upon the ...
Manufactured by:PerkinElmer, Inc. based inShelton, CONNECTICUT (USA)
The NexION® 350X ICP-MS, with a single-channel Universal Cell, is well suited for general purpose applications that may be susceptible to interferences or analyses where you simply want to remove any unknown interferences. The NexION 350X ICP-MS can use a simple non-reactive gas in Collision mode or a reactive gas in Reaction mode, making it ideal for semi-quantitative analysis, environmental ...
Manufactured by:PerkinElmer, Inc. based inShelton, CONNECTICUT (USA)
The Optima 8300 is a bench-top, dual-view ICP-OES with two solid-state SCD detectors, delivering superior detection limits and true simultaneous ...
Manufactured by:Agilent Technologies, Inc. based inSanta Clara, CALIFORNIA (USA)
Raise your expectations—the new Agilent 7900 ICP-MS opens up a new dimension in quadrupole ICP-MS. With 10x higher matrix tolerance, 10x wider dynamic range and 10x better signal to noise than the world’s bestselling 7700 ICP-MS Series, plus software so powerful that it can write your methods for you, the Agilent 7900 ICP-MS redefines ICP-MS. Again. The world’s most powerful and ...
Manufactured by:Medic Labor s.r.o. based inBratislava, SLOVAKIA
Engineered to deliver an uncompromising level of performance at an unbeatable price, the PinAAcle™ 500 puts the industry’s most robust, reliable Flame AA within reach of even the most budget-conscious laboratories. The PinAAcle 500 offers superior durability, longer life, lower maintenance costs, and the fastest return on investment of any Flame AA. Discover an instrument engineered ...