Show results for
Refine by
Applications
- Process analyzers & instruments for trace carbon monoxide
- Process analyzers & instruments for trace carbon dioxide
- Process analyzers & instruments for trace hydrogen
- Process analyzers & instruments for trace methane
- Process analyzers & instruments for thin film/semiconductor/PVD
- Gas monitoring and dust monitoring for the iron / steel industry
- Gas monitoring and dust monitoring for the aluminium industry
- Water treatment solutions for cooling water treatment
- Water treatment solutions for utility water treatment
- Gas monitoring and dust monitoring for the nickel industry
- Process analyzers & instruments for CO emissions
- Process analyzers & instruments for atmospheric sampling reactive gases and CVD
- Advanced technology solutions for Ports and harbors sector
- Gas monitoring and dust monitoring for the powerplants industry
- Gas monitoring and dust monitoring for the cement industry
- Gas monitoring and dust monitoring for chemical industry
- Gas monitoring and dust monitoring for refinery industry
- Gas monitoring and dust monitoring for BFO gas (blastfurnace off gas/ combustion control)
- Gas monitoring and dust monitoring for fertilizer industry
- Gas monitoring and dust monitoring for pulp and paper industry
- Solutions for waste water treatment
- Water treatment solutions for swimming pool water treatment
- Gas monitoring and dust monitoring for the enviromental industry
- Gas monitoring and dust monitoring for the LNG industry
- Gas monitoring and dust monitoring for the natural gas industry
- Gas monitoring and dust monitoring for the refinery industry
- Gas monitoring and dust monitoring for the nuclearpower industry
- Gas monitoring and dust monitoring for the boilers
- Gas monitoring and dust monitoring for the BOF (basic oxygen furnace)
- Gas monitoring and dust monitoring for carbon black producers
- Gas monitoring and dust monitoring for the clean gases
- Gas monitoring and dust monitoring for the coke-oven gas
- Process analyzers & instruments for sulfur recovery tail gas
- Process analyzers & instruments for sulfur pit gas
Sample Processing Equipment Supplied In Norway
113 equipment items found
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
The 858 Professional Sample Processor processes samples from 500 µL to 500 mL. The sample transfer takes place either by means of a peristaltic pump on the 850 Professional IC system or with an 800 ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
The 858 Professional Sample Processor – Pump processes samples from 500 µL to 500 mL. The sample transfer takes place either with the installed bidirectional two-channel peristaltic pump or with an 800 ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
The Metrosep A Supp 1 - 250/4.6 is a universal anion column that is characterized by medium capacity and special selectivity. With this column it is possible to process samples with great differences in concentrations. For example, 4 µg/L of sulfate can be determined in a solution containing 150 g/L sodium chloride. An additional advantage is that bromide ...
Manufactured by:RETSCH - part of Verder Scientific based inHaan, GERMANY
The Cross Beater Mill SK 300 is suitable for coarse and fine size reduction, either in batches or continuously. It can process medium-hard and brittle materials and is easy to operate. For increased sample discharge and for processing heat-sensitive samples, an optionally available cyclone unit unit can be used instead of the ...
Manufactured by:RETSCH - part of Verder Scientific based inHaan, GERMANY
The knife mill GRINDOMIX GM 200 is the ideal instrument for grinding and homogenizing foods and feeds. With two sharp, robust blades and a powerful 1000 W motor, it allows to process sample volumes up to 0.7 liters quickly and effectively. The GM 200 is not only ideal for homogenizing substances with a high water, oil or fat content but is also perfectly suited ...
Manufactured by:RETSCH - part of Verder Scientific based inHaan, GERMANY
The Rotor Beater Mill SR 300 is suitable for coarse and fine size reduction. It can process dry, soft, medium-hard, organic and inorganic substances. For increased sample discharge and for processing heat-sensitive samples, an optionally available cyclone unit can be used instead of the gravity ...
Manufactured by:RETSCH - part of Verder Scientific based inHaan, GERMANY
Jaw crushers are always at the very front of the sample preparation chain, pre-crushing all hard and brittle materials. RETSCH jaw crushers are primarily used in laboratories and pilot plants under rough conditions but are also suitable for on-line quality control of raw materials. The RETSCH jaw crusher series is available in 8 different sizes. Throughput and final fineness ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
The Professional IC Vario system with Metrohm's intelligent Pick-up Injection Technique (MiPuT), sequential suppression and conductivity detection enables the determination of anions or cations from the smallest of sample ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
The Professional IC Vario system with Metrohm's intelligent Partial Loop Injection Technique, sequential suppression and conductivity detection enables fully automated determination of anions or cations. "Partial Loop Injection" enables the injection of various sample ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
The Professional IC Vario system with Metrohm's intelligent Partial Loop Injection Technique, sequential suppression, and conductivity detection enables fully automated determination of anions and cations. "Partial Loop Injection" enables the injection of various sample ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
"Reduce to the max" - this is the 916 Ti-Touch concept. The compact titrator from Metrohm offers the maximum in the class of stand-alone systems for routine analysis. The 916 Ti-Touch with built-in magnetic stirrer supports all potentiometric titrations: the titration modes DET (dynamic equivalence point titration), MET (monotonic equivalence point titration), SET (titration to one or two ...
Manufactured by:RETSCH - part of Verder Scientific based inHaan, GERMANY
The BB 50 is the smallest model of the RETSCH jaw crusher series and has been specially designed for sample preparation in the laboratory. The compact machine fits on any laboratory bench and offers safe and convenient handling. The RETSCH jaw crusher series is available in 8 different sizes. Throughput and final fineness depend on the crusher type, selected gap width and ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
Robotic USB Sample Processor XL with one workstation for the automatic processing of routine samples in series with large quantities and for complex sample preparation or parallel runs. Up to two pumps (membrane or peristaltic) and three dosing devices for Liquid Handling tasks can be connected. Because of the multitude of ...
Manufactured by:RETSCH - part of Verder Scientific based inHaan, GERMANY
The Jaw Crusher BB 500 is specifically designed for accepting large feed sizes up to 110 mm. The gap width can be set stepless from 0-11 mm. Depending on the sample material, particle sizes down to 0.5 mm can be obtained in one working run, resulting in an excellent crushing ratio of 220. A throughput of up to 500 kg/h is possible with the BB 500. The RETSCH jaw crusher series is ...
Premium
Manufactured by:Analytik Jena - Lab-loving people based inJena, GERMANY
CyBio FeliX extract is the solution for automated nucleic acid extraction in the 96-well format: Pipetting platform, extraction kits, software and consumables form a unit that accelerates your extraction workflow, delivers better results and makes your work ...
Manufactured by:RETSCH - part of Verder Scientific based inHaan, GERMANY
The Jaw Crusher BB 600 is specifically designed for accepting large feed sizes up to 350 x 170 mm. The gap width can be set stepless from 6 - 60 mm. Depending on the sample material, particle sizes down to 6 mm can be obtained in one working run, resulting in an excellent crushing ratio of 25. A throughput of up to 3500 kg/h is possible with the BB 600. The RETSCH jaw crusher ...
Manufactured by:NEO Monitors - a Nederman company based inSkedsmokorset, NORWAY
The detector is not affected by pollutants and corrosive gases and does not require daily maintenance. Since there is no need for sampling pretreatment process, the measurement reliability is further improved and the error caused by the pretreatment process is eliminated. The analyzer is directly connected to the process pipe at ...
Manufactured by:RETSCH - part of Verder Scientific based inHaan, GERMANY
The Jaw Crusher BB 400 is specifically designed for accepting large feed sizes up to 220 x 90 mm. The gap width can be set stepless from 0-30 mm. Depending on the sample material, particle sizes down to 2 mm can be obtained, resulting in a crushing ratio of 50. A throughput of up to 400 kg/h is possible with the BB 400. The RETSCH jaw crusher series is available in 8 different ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
Basic model for setting up customer-specific automation in the titration. Space-saving Robotic Sample Processor XL with integrated Titrando, one workstation including Swing Head and two built-in membrane pumps. The programming of the methods is accomplished by means of the handy Touch Control or with the tiamo™ titration ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
Precise measurement results at the push of a button make the NIRS XDS RapidLiquid Analyzer an equally reliable and simple solution for quality monitoring in laboratories and processes. The samples are transferred to quartz cuvettes designed for multiple use or disposable glass vials; a tempered sample compartment ensures reproducible analysis ...