Refine by
Applications
- Study of Fluorescence Quenching Kinetics Using Stopped-Flow
- Nuclear Magnetic Resonance Solution for Phosphorus Analysis
- Nuclear Magnetic Resonance Solution for Lithium
- Gas Analysers for Heat Treatment
- Gas Analyzers for Cap Verde
- Advanced FT-NIR Analysis for Food Industry
- FT-NIR Analaysis for alcoholic beverages industry
- Near-Infrared Analysis for Edible Oil Sector
- Advanced FT-NIR Solutions for Pharmaceutical Development and Manufacturing Sector
- FT-NIR analaysis for chocolate & cocoa sector
- FT-NIR analaysis for fish & seafood sector
- FT-NIR analysis for coffee sector
- FT-NIR analysis for measuring meat products sector
- FT-NIR spectroscopy in rapid detection of paprika adulteration sector
- FT-NIR spectroscopy in sugarcane liquor industry
- FT-NIR analaysis for meat & poultry industry
- FT-NIR analaysis for non-alcoholic beverages sector
- FT-NIR analaysis for snack food industry
- FT-NIR analaysis for spices & raw ingredients sector
- Detecting melamine adulteration in milk powder sector
- FT-NIR analysis for pharmaceutical raw material identification sector
- FT-NIR analysis for verifying raw materials through plastic and paper packaging industry
- Electroluminescence and Photoluminescence Spectroscopy of a Phosphorescent Organic Light Emitting Diode (PhOLED)
- Luminescence Thermometry with Upconversion Materials
- Determination of Chromaticity Coordinates and Bandgaps of III-V LEDs Using Electroluminescence Spectroscopy
- Time-Resolved Electroluminescence Spectroscopy of a White Light Emitting Diode
- Observing Phase Transitions in a Halide Perovskite Using Temperature Dependent Photoluminescence Spectroscopy
- Nuclear Magnetic Resonance Solution for Sodium in Food and Beverages
- Nuclear Magnetic Resonance Solution for Sodium in Condiments and Soups
- Nuclear Magnetic Resonance Solution for Sodium in Crisps and Snacks
- Nuclear Magnetic Resonance Solution for Nutrients in Slurry
- Nuclear Magnetic Resonance Solution for Lithium Content in Brine
- Analytical and measuring instruments of energy and chemicals industry
- Advanced FT-NIR Analysis for Chemicals & Polymers Industry
- Stack emissions monitoring
- Acoustic Spectroscopy for Nanotechnology Sector
- Acoustic Spectroscopy for Bio-Sciences and Pharmaceuticals
- Acoustic Spectroscopy for Ceramics Industry
- Gas Analysers for Additive Manufacturing Sector
- Gas Analysers for Inert Gas Blanketing
- XRF Coating Thickness Measurement Systems for Printed Circuit Boards
- XRF Coating Thickness Measurement Systems for General Metal Finishing
- Laboratory and Scientific Instruments Solutions for Food Industry
- Laboratory and Scientific Instruments Solutions for Chemical Industry
- Laboratory and Scientific Instruments Solutions for Environment Industry
- Laboratory and Scientific Instruments Solutions for Pharmaceutical Industry
- Laboratory and Scientific Instruments Solutions for Metallurgy Industry
- Laboratory and Scientific Instruments Solutions for Textile Industry
- Laboratory and Scientific Instruments Solutions for Biotechnology Industry
- Laboratory and Scientific Instruments Solutions for Medical Industry
- Laboratory and Scientific Instruments Solutions for Material Analysis Industry
- Laboratory and Scientific Instruments Solutions for Cosmetics Industry
- Near-Infrared Analysis for Rice Sector
- Comparing Hole Extraction Efficiencies in Perovskite Solar Cells using Photoluminescence Quantum Yield
- Understanding the Light-Harvesting Photosystem II; Utilising Transient Absorption to Study a Molecular Triad’s Photoinduced Electron Transfer Reactions
- Kinetics of Photocatalysis Reactions Studied by Transient Absorption Spectroscopy
- Energy Transfer in a Liquid Scintillator Investigated using Time-Resolved X-ray Excited Luminescence Spectroscopy
- Emission Tail of Indium Phosphide Quantum Dots Investigated using the FS5 Spectrofluorometer
- Sn to Mn Energy Transfer Revealed using Time-Resolved Emission Spectroscopy (TRES)
- Identifying Thermally Activated Delayed Fluorescence (TADF) using an FS5 Spectrofluorometer
- Temperature Dependent Triplet States of Benzophenone; Spectral and Lifetime Measurements Utilising Transient Absorption Spectroscopy
- Fluorescence, Delayed Fluorescence and Phosphorescence Spectra of a TADF Emitter Measured using the FLS1000 with a VPL laser and Gated PMT Detector
- Photoluminescence Spectroscopy of Carbon Dots
- Relative Quantum Yield of 2-Aminopyridine
- Ligand Binding Assays on the Basis of Fluorescence Anisotropy
- Measuring Picosecond Fluorescence Lifetimes Using the FLS1000 Equipped with a Hybrid Photodetector
- Tuning the Photoluminescence of Graphene Oxide
- Photophysical Characterisation of Perovskite Quantum Dots
- SWCNT: Photogenerated Excited States in Solubillized Single-Wall Carbon Nanotubes; Transient Absorption and Oxygen Dependence of the Triplet
- Measuring Charge Carrier Lifetime in Perovskite Solar Cell Materials Using Time-Resolved Photoluminescence Spectroscopy
- Red-Edge Excitation Spectroscopy of Proteins with the FS5 Spectrofluorometer
- Molecular Beacon Probe Fluorescent Detection of DNA
- Novel microfluidic and bio-imaging technologies solutions for fertility areas
- Time-resolved Spectroscopy of Phosphorescent Oxygen Sensors in a Relevant in vitro Environment for Biomedical Applications
- Temperature-Dependent Quantum Yield of Fluorescence from Plant Leaves
Sampling Chamber Equipment & Supplies
411 equipment items found
Manufactured by:Sciencetech Inc. based inLondon, ONTARIO (CANADA)
This sample chamber has one input port and two output ports. One of the output ports is 90° relative to the input port, allowing it to be used in fluorescence-type applications. The other output port is directly across from the input port, allowing it to be used for transmission measurements/applications. The lid of the sample ...
Manufactured by:Dispersion Technology, Inc. (DTI) based inBedford Hills, NEW YORK (USA)
Small size sample chamber, from 10 to 15 ml, for DT-1202 and DT-100 and DT-600. DTI-0598 aqueous, DTI-0598K – ...
Manufactured by:ELITechGroup based inPuteaux, FRANCE
Wescor's sample chamber, model C-52, can measure the water potential of solutions, small soil or leaf samples, and leaf discs. Due to the solid aluminum housing, the C-52 provides highly accurate water potential measurements without the need for a constant temperature bath. The C-52 must be connected to a Wescor water potential instrument such as ...
Manufactured by:Sciencetech Inc. based inLondon, ONTARIO (CANADA)
This external transmission/reflectance sample chamber can be mated to the output port of a Sciencetech FTIR system. This chamber allows small samples to be studied in both transmission and reflectance modes, at temperatures ranging from approximately -20° Celsius to room temperature. The sample ...
Manufactured by:Purestream based inStockport, NORTHERN IRELAND
MCERTS & Final Effluent Sampling Chambers provide reliable, compliant monitoring of flow and water quality in wastewater treatment ...
Manufactured by:CDS Analytical based inOxford, PENNSYLVANIA (USA)
The Drop-In-Sample-Chamber (DISC) is a novel accessory module for the 6000 series Pyroprobes. It transforms the horizontal sample loading probe used in traditional manual pyrolysis system to a convenient vertical loading system. The DISC saves your precious time by reducing the sample tube loading process. When used with the ...
Manufactured by:Dispersion Technology, Inc. (DTI) based inBedford Hills, NEW YORK (USA)
Medium sample volume chamber, 70 ml, for DT-1202 and DT-100 and DT-600, allowing usage of magnetic mixer or peristaltic pump. DTI-0635 – aqueous, DTI-0635K – ...
Manufactured by:In-Situ Process based inFort Collins, COLORADO (USA)
For coarse screening. Algae screening protects analyzer inlet screens and reduces maintenance. Typical applications include post secondary clarifier. TSS is less than 150 mg/L, NTU is less than 60. Run is greater than 20 ft. Lift is greater than 5 ft. Maximum of Eight Sample Lines. External Pump(s) Required. Provided by ASA or Others. 3-10 ...
Manufactured by:HI-Q Environmental Products Company, Inc. based inSan Diego, CALIFORNIA (USA)
The MK-30 Sample Analysis Monitoring Chamber is used with a PC computer to provide measurements of swipe (smear) samples, evaporation samples, and air filters. The MK-30 has a shielded chamber to reduce background and increase measurement sensitivity. ...
Manufactured by:Shanghai Riechy Measurement and Control Technology Co., Ltd. based in, CHINA
#PVTest #SoftFilm #Backsheet #PhotovoltaicTechnology #SmallsizeMaterialTest #UVAgingTestChamber #DampHeatTest #UVDPTest Exposure area: 1000mmx1000mm Irradiation intensity: 150-250W/m2 Spectrum range: 280-400nm Nonuniformity: ≤15% UVB/(UVA+UVB): 3% to 10% UVC: ≤ Basically none Mean lamp life: ≥2000hrs Lamp warranty: 1500hrs EPS: 30% to 100% (adjustable) The application: UV preconditioning test ...
Showcase
Manufactured by:Galaxy Scientific Inc based inNashua, NEW HAMPSHIRE (USA)
The QuasIR™ 4000 FT-NIR spectrometer was designed from the ground up to offer the industry a new kind of NIR analysis solution – a solution that brings together the portability required to move NIR analysis closer to point-of-need, combined with unmatched spectroscopic performance for the fastest and most accurate results. It was engineered to ensure direct calibration transfer ...
Premium
Manufactured by:Shanghai Metash Instruments Co., Ltd. based inShanghai, CHINA
Automatic 8-position Cell Holder. Easy Printing. USB Port, Fast Data Output. Optional Bluetooth Module and PC software.. Large Sample Chamber, Multi Options of Accessories. High-quality Grating with High Performance. 16mm-thick Optical Base, Rigid ...
Premium
Manufactured by:Shanghai Metash Instruments Co., Ltd. based inShanghai, CHINA
Latest Microprocessor Controlling System. Precision 1200 lines/mm Grating Monochromator. Easy Data Output by USB/Parallel Port. Wide Sample Chamber Enables Multi-functions. Four Display Modes; One-Button Quick Switching. ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
The multipurpose solution for small samples: Introducing the Glass Oven G-300, BUCHI’s all-in-one instrument for small samples. With interchangeable accessories, the Glass Oven G-300 can perform distillation, drying, sublimation, and freeze-drying, eliminating the need for multiple large instruments. Its compact size even allows placement in a glovebox, ensuring the safe handling of ...
Premium
Manufactured by:General Oceanics Inc. based inMiami, FLORIDA (USA)
1010X External Spring Water Sampling Bottles Now you can have the simplicity and reliability of a Niskin water sampler and have a completely unobstructed sample chamber. The new Niskin X utilizes stainless steel external spring closures. The Niskin X Water Sampler can be activated by the GO Devil Messenger (1000-MG) when individually or serially ...
Premium
Manufactured by:Lovibond Water Testing and Colour Measurement based inDortmund, GERMANY
The PFXi series of spectrophotometric colorimeters introduces a unique concept in liquid colour control: RCMSi technology. You can benefit from the capability for remote calibration and servicing via the internet - saving the cost and time associated with servicing and guaranteeing compliance with standards. The PFXi-880/950/995 series ensure high precision results from the 16 filter wavelength ...
Premium
Manufactured by:Casella based inKempston, UNITED KINGDOM
The Microdust Pro is a real-time hand-held, data logging instrument for the detection of airborne dusts, fumes and aerosols. It is ideal for walk-through surveys and for checking the effectiveness of control measures. It is a simple to use instrument which gives the user the additional qualitative data which cannot be gained by gravimetric air sampling methods alone. ...
Premium
Manufactured by:Lovibond Water Testing and Colour Measurement based inDortmund, GERMANY
The Model F is a visual colorimeter designed to optimise the use of Lovibond glass filters in order to express colour in a colour scale in terms of Lovibond Red, Yellow, Blue and Neutral. It is available in slightly varying formats to meet the requirements of different applications (i.e. petroleum and edible oils) and the national and international standardising bodies which specify the ...
Premium
Manufactured by:Lovibond Water Testing and Colour Measurement based inDortmund, GERMANY
The Lovibond Model Fx solves the temperature problems associated with consistently measuring the colour of edible oils and addresses the need for quickly delivering accurate results. Misreading from crystallisation can be eliminated with its ability to keep the oil at a constant temperature and report the temperature of the ...
Premium
Manufactured by:Shanghai Metash Instruments Co., Ltd. based inShanghai, CHINA
Continuous Adjustable Bandwidth: 0.1-5nm continuously adjustable bandwidth with 0.1nm interval, suitable for various applications, especially for samples with sharp absorption peaks, like penicillin sodium, penicillin potassium, etc. Mercury Lamp equipped for auto WL calibration. Larger Sample Chamber, Multi Functions. PC Software Controlled. ...