Refine by
Scientific Data Logger Equipment & Supplies
34 equipment items found
Manufactured by:Campbell Scientific, Inc. based inLogan, UTAH (USA)
The 014A, manufactured by Met One, is a three-cup anemometer that monitors wind speed for the range of 0 to 45 m/s with a threshold of 0.45 m/s. You connect the 014A directly to a Campbell Scientific data logger, which measures the anemometer's pulse signal and converts the signal to engineering units (mph, m/s, ...
Manufactured by:Campbell Scientific, Inc. based inLogan, UTAH (USA)
An integrated electronic compass allows the MetSENS200 to provide accurate, relative wind direction measurements without being oriented in a particular way, making installation easier. WMO average wind speed and direction and gust data are provided. The MetSENS200 is compatible and easily integrated with the MeteoPV Solar Resource Platform and any Campbell ...
Manufactured by:Campbell Scientific, Inc. based inLogan, UTAH (USA)
Its low power consumption and wide power-supply range make it popular for remote locations with no access to ac power, and its pulse/frequency signal is ideal for use with Campbell Scientific data loggers. The sensor is constructed from anodized aluminum alloys, stainless steel, and weather-resistant plastics for long life. It is used as part of ...
Manufactured by:MTN Met Instruments Pvt ltd based inGreater Noida West, INDIA
The CS475A outputs a digital SDI-12 signal to indicate distanceand stage. This output is acceptable for recording devices withSDI-12 capability, including Campbell Scientific data ...
Manufactured by:Campbell Scientific, Inc. based inLogan, UTAH (USA)
The eosFD, manufactured by Eosense, uses the patented Forced Diffusion (FD) technology to measure soil CO2 flux directly using an NDIR sensor and small internal diaphragm pump. It features onboard data logging capabilities that enable it to be a stand-alone sensor; however, it can also deliver analog or serial data to Campbell Scientific ...
Manufactured by:Campbell Scientific, Inc. based inLogan, UTAH (USA)
The MetSENS300 compact weather sensor measures air temperature, relative humidity, and barometric pressure in a single, combined instrument mounted inside three double-louvered, naturally aspirated radiation shields with no moving parts. Temperature, relative humidity, barometric pressure, absolute humidity, air density, and wet bulb temperature data are provided. The MetSENS300 ...
Manufactured by:Campbell Scientific, Inc. based inLogan, UTAH (USA)
The CS475A outputs a digital SDI-12 signal to indicate distance and stage. This output is acceptable for recording devices with SDI-12 capability, including Campbell Scientific data ...
Manufactured by:Campbell Scientific, Inc. based inLogan, UTAH (USA)
The SR50A-EE is an anodized version of Campbell Scientific's acoustic sensor for measuring the distance from the sensor to the snow surface. The sensor has been designed to operate in extreme environmental conditions where corrosion is a concern (such as coastal regions). The SR50A-EE features an aluminum body that has been treated with a Type III, hard-anodizing process ...
Manufactured by:Campbell Scientific, Inc. based inLogan, UTAH (USA)
WMO average wind speed and direction and gust, temperature, relative humidity, barometric pressure, absolute humidity, air density, and wet bulb temperature data are provided. The MetSENS500 is compatible and easily integrated with the MeteoPV Solar Resource Platform and any Campbell Scientific data logger using SDI-12, RS-485, ...
Manufactured by:Campbell Scientific, Inc. based inLogan, UTAH (USA)
WMO average wind speed and direction and gust, temperature, relative humidity, barometric pressure, absolute humidity, air density, wet bulb temperature, rainfall total, and rainfall intensity data are provided. The MetSENS600 is compatible and easily integrated with the MeteoPV Solar Resource Platform and any Campbell Scientific data ...
Manufactured by:Campbell Scientific, Inc. based inLogan, UTAH (USA)
WMO average wind speed and direction and gust, temperature, relative humidity, barometric pressure, absolute humidity, air density, wet bulb temperature, rainfall total, and rainfall intensity data are provided. The MetSENS550 is compatible and easily integrated with the MeteoPV Solar Resource Platform and any Campbell Scientific data ...
Manufactured by:Campbell Scientific, Inc. based inLogan, UTAH (USA)
The “C” version of this sensor (coil version) contains no mercury and is compatible with all Campbell Scientific measurement and control data loggers. The P2546A (reed switch version) and P2546D (electronic version) are also ...
Manufactured by:Campbell Scientific, Inc. based inLogan, UTAH (USA)
The durable construction is suitable for both on-shore and off-shore environments. The “D” version of this sensor (electronic version) is compatible with all Campbell Scientific measurement and control data ...
Manufactured by:Campbell Scientific, Inc. based inLogan, UTAH (USA)
The CC5MPXWD is similar to the CC5MPX, except it includes an internal defroster that prevents and removes light frost and icing from the camera's window. This high-resolution digital camera produces JPG images with a resolution of up to 5 megapixels, and shoots videos with a resolution of up to 720P. It has an integrated environmentally sealed enclosure that protects the camera from moisture and ...
Manufactured by:MetSpec based inNottingham, UNITED KINGDOM
No matter how careful you have been in your choice of sensors, the choice of a high specification shield is vital. This will help to ensure that you maintain measurement accuracy and protect your sensors from blowing precipitation, insect life and debris. Because these factors can seriously impact on the performance of even the most expensive and accurate sensors. ...
Manufactured by:Sper Scientific based inScottsdale, ARIZONA (USA)
Sper Scientific’s Integrating Sound Datalogger measures sound pressure level (SPL) according to A or C weighting and integrates the weighted SPL over an established length of time, such as an 8-hour workday, to calculate cumulative sound exposure (LEQ). ...
Manufactured by:Campbell Scientific, Inc. based inLogan, UTAH (USA)
The KH20 is a highly sensitive hygrometer designed for measurement of rapid fluctuations in atmospheric water vapor, not absolute concentrations. It is typically used together with a CSAT3B in eddy-covariance ...
Manufactured by:MetOcean Telematics based inDartmouth, NOVA SCOTIA (CANADA)
MetOcean developed the Ice Mass Balance (IMB) buoy in partnership with CRREL (Cold Regions Research and Engineering Laboratory). IMB’s instruments measures ice thickness and ice temperature, and acquires meteorological and upper oceanographic ...
Manufactured by:East 30 Sensors based inPullman, WASHINGTON (USA)
Sturdy and affordable Needle Thermal Resistivity and Conductivity Probe. The East 30 Sensors Thermal Conductivity Sensor is ASTM D5334-14 compliant and accurate in many applications including:, Agronomy, Food industry, Insulation, Laboratory and Field, ASTM D5334-14 ...
Manufactured by:Jeostok based inYenimahalle, TURKEY
A real-time alternative to the traversing probe type of inclinometer, the GeoFlex system is a string of closely spaced MEMS sensors that employs a chain of sensors and does not require an on-site operator. ...