Refine by
Applications
- Air pollution, emission and process monitoring systems for food & pharma
- Air pollution, emission and process monitoring systems for metals
- Air pollution, emission and process monitoring systems for agriculture
- Air pollution, emission and process monitoring systems for chemicals
- Air pollution, emission and process monitoring systems for minerals
- Cereals moisture measurement for dryer efficiency
- Wastewater treatment solution for the municipal industries
- Wastewater treatment solution for the industrial industries
- Asphalt production - monitoring solutions for process optimization & energy saving
- Decanter Centrifuges for Sludge Dewatering Applications
- Decanter Centrifuges for Wastewater Treatment Applications
- Decanter Centrifuges for Food and Beverage Processing Applications
- Decanter Centrifuges for Brewery and Winery Applications
- Decanter Centrifuges for Renewable Energies Applications
Screw Container Equipment & Supplies
94 equipment items found
Manufactured by:HABA Nordic based inTampere, FINLAND
Equipment: leveling screw D 250 ,motor 1,5 kW, 400 V, 28 r/min,, demountable body , CL-bridges and -hooks, HL-hook (1570 mm), top hung door drain, P-seal, rear roller or rollers corner, bottom PL 3, sides PL 3, sides, inlets 16 A, Electrification multi-polar opposite side of the tank, full tank indicator, the inductive limit, surface treatment: Sand blasting to Sa 2.5, two-component paint, dry ...
Manufactured by:SmartTEH Ltd based inUlbroka, LATVIA
Ash / Screw containers are used to collect, temporarily store and transport hot and cold ash, slag, wood chips, and other material, where continuous automatic feeding takes place. The container is equipped with an ash levelling system with a screw conveyor, screw spreads evenly throughout the ash ...
Manufactured by:JESSBERGER GmbH based inOttobrunn, GERMANY
Flow rates 80, 200 or 300 l/min. Discharge pressure 6 and 12 bar. Pump tube lengths 1,000, 1,200 and 1,400 mm (special lengths available). Suction tube diameter 89 mm (JP-700.80), 105 mm (JP-700.200) and 130 mm (JP-700.300). Hose connection DN 40, DN 50–65, DN ...
Manufactured by:Ma-Com based inStolac, BOSNIA & HERZEGOVINA
In-vitro diagnostic medical device. Produced and packaged in clean room class ISO 8 (controlled microbiological conditions). The container is made of polypropylene. Screw on lid, green or red. 100 ml, graduated. Used for safe storage and transport of urine and other samples. ...
Distributed by:BASCO, Inc based inUniversity Park, ILLINOIS (USA)
This Life Latch® container comes with the patented ""V"" Groove seal for products that need to breathe, for extra-fine chemicals, or can hold high-viscosity liquids - U.N. certification for solids only. Available with blue and red ...
Manufactured by:Ma-Com based inStolac, BOSNIA & HERZEGOVINA
DIMENSIONS : 70 x 47 x 60 MM, The container is made of polypropylene, Color of container is transparent, and the lid is red or green, screw on lid and screw on container, 100 ml, graduated, It is use for safe transport of urine and others ...
Manufactured by:BioGnost d.o.o. based inZagreb, CROATIA
Plastic container with a screw cap for sampling and transporting histology and cytology samples. Ideal for liquid specimen collection, transportation and storage in harsh conditions. Effectively prevents formalin leakage and evaporation. Complies with transportation ...
Manufactured by:Createch Machine and Design based inLakeland, FLORIDA (USA)
Complete with single seed, direct drive motor, Lead screw operation for perfect Tapping every time, Use independently or with other units to form special machines, Can be mounted vertically or Horizontal, 1-SLH Lead Screw Assemblies available with Tru-Grip or Quick Change ...
Premium
Manufactured by:IMKO Micromodultechnik GmbH based inEttlingen, GERMANY
SONO-Ex MIX Mini: mixer probe with wear-resistant ceramic window. The stainless steel housing of the probe and the ceramic window make the SONO-Ex MIX Mini a wear-resistant mixer probe for daily use. The probe is firmly connected to the electronics housing in which the TRIME TDR transmitter is located. This generates a high-frequency TDR pulse with 1 GHz. The TDR pulse travels along the waveguide ...
Premium
Manufactured by:ENVEA based inPoissy, FRANCE
Sensor for continuous moisture measurement in dry bulk solids. Sensors for continuous moisture measurement and installation on conveyor belts, screw feeder or hoppers. This extended moisture range sensor covers a wide range of applications. The sensor penetrates the product for most reliable measurements. High frequency based sensor for high resolution and accuracy. ...
Manufactured by:LP Italiana SPA based inMilano, ITALY
Patented container (European Patent Appl. EP 10425062.6) with 4 separate compartments of 35 ml each. This allows the subdivision of the original sample into 4 completely separate samples. All this is carried out in complete safety for both the operator and the donor to be tested. The container is very simple to use. Fill the container with the ...
Manufactured by:Heinz Herenz Medizinalbedarf GmbH based inHamburg, GERMANY
Test tube with pink screw cap containing 1ml of liquid Amies medium or sampling and preservation of aerobic, anaerobic and other fastidious bacteria within 48 hours. PU = 100 pcs/box, 600 ...
Premium
Manufactured by:ENVEA based inPoissy, FRANCE
Microwave sensor for continuous moisture measurement in dry bulk solids. Sensors for continuous moisture measurement and installation on conveyor belts, screw feeder or hoppers. Two types of sensor-technology to cover a wide range of applications. Both sensors penetrate the product for most reliable measurements. ...
Manufactured by:RCF Bolt & Nut Co. (Tipton) Limited based inWednesbury, UNITED KINGDOM
Socket CSK screws – or socket countersunk screws, contain a hexagonal socket designed for use with Allen keys to achieve a flush finish. If you’re looking for socket CSK screws, RCF Bolt & Nut are experts that are here to help! We offer a range of screws, bolts, and other fastener options across ...
Manufactured by:Tama Aernova SpA based inPredaia, ITALY
The flexible screw conveyor is a specific system to transports and load powder. It is a transport system with a worm screw and containment tube of the material transported, with a ...
Manufactured by:Quality Environmental Containers, Inc. (QEC) based inBeaver, WEST VIRGINIA (USA)
120mL Screw Cap Container: Optically clear non-fluorescent polystyrene. 38mm leak-proof screw cap. Sterile until opened for use. Meets EPA requirements for Bac-T sampling. Available with or without Sodium Thiosulfate tablet. Paper tab tamper-evident ...
Manufactured by:Dodatek s.r.l. based inMonopoli, Bari, ITALY
The stainless-steel rotary capper is a machine designed for the automatic closing of containers with screw or pressure caps and is supplied with a cap ...
Manufactured by:Shukla Medical based inSt. Petersburg, FLORIDA (USA)
The SHUKLA Lag Screw is auniversally compatible extraction systemfor femoral lag screws. It contains a universal set of drivers that engage with exterior lag screw geometry. Interchangeable inner shafts engage with any thread dimension. Driver and shaft assemblies connect efficiently using a quick-connect T-Handle. ...
Manufactured by:Heinz Herenz Medizinalbedarf GmbH based inHamburg, GERMANY
Test tube with red screw cap containing 1ml of liquid transport medium developed for the collection, transportation and survival of viruses, chlamydia, mycoplasma and ureaplasma. PU = 100 pcs/box, 600 ...
Manufactured by:Heinz Herenz Medizinalbedarf GmbH based inHamburg, GERMANY
Test tube with red screw cap containing 1ml of liquid transport medium developed for the collection, transportation and survival of viruses, chlamydia, mycoplasma and ureaplasma. PU = 100 pcs/box, 600 ...