Refine by
Seismic Modeling Equipment & Supplies
17 equipment items found
Manufactured by:Flo Loc Products International based inDana Point, CALIFORNIA (USA)
Manual arm/reset and trip with no SCADA control. This Basic Component provides dry-contacts of the Sensor position only. This unit requires a user provided power source (DCV or ACV). In NEMA 4X Fiberglass enclosure 16X14 (standard - options available). ...
Manufactured by:Flo Loc Products International based inDana Point, CALIFORNIA (USA)
Specifically developed for control valves. Provides simultaneous shutdown of one or more control valves in the event of an earthquake. Standard SCADA and manual arm/reset and trip control and status. Provides a signal to a latching solenoid in the pilot system of the valve In a NEMA 4X Fiberglass enclosure ...
Manufactured by:Flo Loc Products International based inDana Point, CALIFORNIA (USA)
FL201-1, 2, 3, 4, or more - Provides open / closed Panel and SCADA control based solely upon the position of the Seismic Sensor. The valves are fully opened or fully closed by arming or tripping the sensor. FL201-11, 12, 13, 14 or more - Provides Panel and SCADA control to open and close valves and stop at intermediary positions when the Seismic Sensor is Armed. Variations are ...
Manufactured by:Flo Loc Products International based inDana Point, CALIFORNIA (USA)
If the FLOPAK is in close proximity to the Seismic Controller, then the Power Supply can be combined in the same enclosure allowing for a more streamlined installation. ...
Manufactured by:Flo Loc Products International based inDana Point, CALIFORNIA (USA)
FLOSAFE Flow Monitoring Safety System, a FLOLOC Patented System, may be added to any FLOLOC Seismic Controller. FLOSAFE only shuts valves when a break in the pipeline is detected in the minutes after a serious seismic event. This eliminates the problem of an unnecessary shutdown. It requires a second signal from a flow meter or other source in the line to initiate a valve shutdown in a seismic ...
Manufactured by:PASI s.r.l. based inTorino, ITALY
The 3D Land Geophone Mod. 3DLG-2 is the ideal accessory to add to your seismic instrumentation and perform HVSR, MASW and Vibration Analysis. One vertical and two horizontal high-performing sensors - with 2Hz resonance frequency and properly coupled - are mounted in a robust waterproof case, delivered with adjustable feet and inter-changeable ...
Manufactured by:PASI s.r.l. based inTorino, ITALY
Gemini-2 represent PASI answer to the increasing request for HVSR acquisition: a single waterproof case with integrated a low frequency, high performing 3D-geophone assembly (two versions available, with real 2Hz sensors properly coupled) and a powerfull true 24 bit data acquisition board. Through Gemini USB interface and the related data acquisition software your PC will be transformed in a ...
by:TGS based inHouston, TEXAS (USA)
This new fully open-source format, and associated algorithms, have been specifically designed to support the storage and manipulation of multidimensional datasets, including seismic and wind modeling data. MDIO allows for innovative growth in a wide variety of applications, including seismic and renewable energy solutions, and the algorithms' ...
Distributed by:Geospace Survey Services Limited based inLittleover, UNITED KINGDOM
The refraction method uses seismic waves, introduced into the ground by a weight-drop source, to determine the compressional velocity of earth material. The seismic wave changes direction and speed, or refracted, as it propagates through the earth. When the refracted seismic wave impinges on an interface at a critical incident angle, the energy ...
Manufactured by:Xi`an Hoan Microwave Co., Ltd. based inXi`an, CHINA
The base isolation can effectively reduce the seismic response of the structure. The traditional goal of fortification is "small earthquake is not bad, medium earthquake can be repaired, big earthquake cannot fall", and the isolated buildings can achieve "small earthquakes, and moderate earthquakes are not bad or slight damage, large earthquake does not lose its function", so it's very effective ...
Manufactured by:Hitachi Zosen Corporation based inTokyo, JAPAN
In the fields of structural strength and vibration, we are engaged in the research and development of technologies that support safety and security (impact strength, fatigue strength, high temperature strength, vibration control, seismic resistance, strength prediction simulation) through numerical analysis technology such as non-linearity and experiment/measurement ...
Manufactured by:SensoGuard Ltd. based inShoham, ISRAEL
SensoGuard AIO XR ugs sensor is an autonomous wireless seismic sensor designed for long term installations of mission critical applications (HLS, Defense). The AIO XR ugs sensors includes internal non-rechargeable battery for 4 years of continuous operation. The AIO XR ugs sensor continuously monitors the area of interest and search for patterns of footsteps, vehicles and digging activity. ...
Manufactured by:SensoGuard Ltd. based inShoham, ISRAEL
SensoGuard AIO 2.0 ugs sensor is an autonomous wireless seismic sensor designed for mobile-tactical applications. The AIO 2.0 ugs sensors includes internal rechargeable battery for 10 months of continuous operation. The AIO 2.0 ugs sensor continuously monitors the area of interest and search for patterns of footsteps, vehicles and digging activity. Upon detection, it sends a wireless alert to ...
Manufactured by:LiTeM Life Testing Machines based inAncona, ITALY
The RTC 9001 controller range has been developed and assembled in Italy, using the best available technologies; essential to perform precise and reliable mechanical structural tests, allowing for the management of different types of actuators and motors. The RTC 9001 is a mono-axial controller (non-expandable); it can run static and cyclical tests both in displacement control, force control, aux ...
Manufactured by:LiTeM Life Testing Machines based inAncona, ITALY
The RTC 9002 controller range has been developed and assembled in Italy, using the best available technologies; essential to perform precise and reliable mechanical structural tests, allowing for the management of different types of actuators and motors. The RTC 9002 is a bi-axial controller (non-expandable); it can run static and cyclical tests both in displacement control, force control, aux ...
Manufactured by:M.A.E. Srl based inFrosolone (IS), ITALY
Kit for non-destructive structural investigations with seismic tomography for verification of quality preservation status of construction materials, ideal for: beams (wooden also), masonry walls, columns in stone material, masonry works with poor degree of material homogeneity, works of historical and cultural interest. This survey method is used to identify physical-geometrical anomalies inside ...
Distributed by:Geomatrix Ltd based inLeighton Buzzard, UNITED KINGDOM
The Model DHA-7 downhole hydrophone array is designed for high-resolution seismic borehole imaging. Unique proprietary polymer hydrophones (no ceramics) are in-line moulded to a fully integrated, triple-sealed multi-conductor cable. Non-shattering polymer material provides superior performance and durability under the rigors of borehole applications and a stable ...