Refine by
Seismic Testing System Equipment & Supplies
14 equipment items found
Manufactured by:Unholtz-Dickie Corporation based inWallingford, CONNECTICUT (USA)
Unholtz-Dickie offers the world’s first all air-cooled, electrodynamic long-stroke testers for telecommunications, earthquake simulation, and transportation applications. Up to 2,300 lbs (1,040 kg) of payload can be supported on a 48x48 inch (1.2 x 1.2 m) footprint on either the slip plate of the horizontal LS12H thruster or the bearing-guided head expander of the vertical LS12V unit. Both ...
Manufactured by:Geomil Equipment B.V. based inMC Moordrecht, NETHERLANDS
The Geomil Seismic Cone Penetration Testing (SCPT) is a valuable geotechnical tool to facilitate the determination of low strain in‐situ compression (P) and shear (S) wave velocities. The accurate determination of P‐wave and S‐wave arrival times from the recorded time series is of paramount importance to the evaluation of reliable seismic wave velocities. These velocities are directly related to ...
Manufactured by:Olson Instruments, Inc. based inWheat Ridge, COLORADO (USA)
Olson's Best Selling Nondestructive Testing System to Test Newly Placed Shaft Foundations. The Crosshole Sonic Logging system is the most accurate and reliable technique for assessing the integrity of deep foundation elements constructed on-site from concrete or grout. The system is designed for Quality Assurance (QA) testing of newly placed critical drilled shaft foundations and auger cast ...
Manufactured by:Olson Instruments, Inc. based inWheat Ridge, COLORADO (USA)
Crosshole and Downhole Seismic (CS/DS) investigations provide information on dynamic soil and rock ...
Manufactured by:Olson Instruments, Inc. based inWheat Ridge, COLORADO (USA)
The Slab Impulse Response method is excellent for evaluating the condition of slab subgrade support. The Slab Impulse Response (SIR) system is designed to identify subgrade voids below slabs-on-grade less than two feet thick. In addition, the Slab IR test method can be used on other concrete structures to quickly locate areas with delaminations or voids in the concrete, if the damage is ...
Manufactured by:Olson Instruments, Inc. based inWheat Ridge, COLORADO (USA)
Impact Echo Scanning (IES) investigations are performed on large structural members with smooth concrete where shallow voids, honeycomb, cracking or delaminations are of primary concern. The Impact Echo Scanning (IES) system is designed for large area investigations of shallow voids, debonding/delamination, cracking, or honeycomb often found between an overlay on a bridge deck or ...
Manufactured by:Olson Instruments, Inc. based inWheat Ridge, COLORADO (USA)
Impact Echo (IE) investigations are performed to assess the condition or thickness of slabs, beams, columns, walls, pavements, runways, tunnels, and ...
Manufactured by:Olson Instruments, Inc. based inWheat Ridge, COLORADO (USA)
Ultrasonic Pulse Velocity (UPV) investigations are performed to assess the condition of structural members if access to both sides is available. Sonic Pulse Velocity (SPV) is performed on mass concrete over 10 ft (3 m) thick. The Ultrasonic Pulse Velocity (UPV) systems are designed to identify and map voids, honeycomb, cracks, delaminations, and other damage in concrete, wood, masonry, stone, ...
Manufactured by:Olson Instruments, Inc. based inWheat Ridge, COLORADO (USA)
Parallel Seismic is more accurate, more versatile than other nondestructive surface techniques for determination of unknown foundation depths. Parallel Seismic (PS) systems are designed to determine the length and integrity of foundations when the top is not accessible or when the pile is too long and slender to test with echo ...
Manufactured by:Olson Instruments, Inc. based inWheat Ridge, COLORADO (USA)
Sonic Echo-Impulse Response is used for low strain integrity testing of piles and determination of deep foundation length. The Sonic Echo-Impulse Response test method (also known as the Pile Integrity Test, or PIT) is designed to determine the length and integrity of foundations when the top or part of the upper side of the foundation is accessible. This method can be used on both new and ...
Manufactured by:LiTeM Life Testing Machines based inAncona, ITALY
The RTC 9002 controller range has been developed and assembled in Italy, using the best available technologies; essential to perform precise and reliable mechanical structural tests, allowing for the management of different types of actuators and motors. The RTC 9002 is a bi-axial controller (non-expandable); it can run static and cyclical tests both in displacement control, force control, aux ...
Manufactured by:AVIC-Tech (Xiamen) Electronics Co., Ltd. based inHaicang District, CHINA
ANP Series 1E UPS for nuclear plants, as a piece of equipment relevant to nuclear safety, is applied to provide reliable energy for instrument control, monitor and other active devices installed to guarantee the safety of nuclear plants. Although without MCU and DSP, its hard core employs pure hardware control circuit to ensure that nuclear power be employed under safety-critical conditions. With ...
Manufactured by:SolGeo Srl based inSeriate, ITALY
All-in One system is a rugged and reliable equipment with various dedicated piezoelectric sensors and probes. All-in One is characterized by an A/D board multichannel and selectable sampling rates from 10KHz to 6.25MHz (up to 12.5MHz single channel). All acquired signals are displayed, computed and memorized directly on tablet pre-installed software. Connection between All-in One system and ...
Manufactured by:Olson Instruments, Inc. based inWheat Ridge, COLORADO (USA)
The ultimate in a professional, field ruggedized battery powered Nondestructive Testing & Seismic Geophysical Testing Platform...with several optional add-on test method capabilities! The Freedom Data PC (FDPC) multiple system platform provides the user with unmatched flexibility for stress-wave based NDT ...