Refine by
Sequential Sampling Equipment Supplied In Spain
18 equipment items found
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
The Professional IC Vario system with Metrohm's intelligent inline sample preconcentration, sequential suppression, and conductivity detection enables fully automatic determination of anions or cations in solutions with low ion ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
The Professional IC Vario system with Metrohm's intelligent inline sample preconcentration, sequential suppression and conductivity detection enables fully automatic determination of anions and cations in solutions with low ion ...
Premium
Manufactured by:ENVEA based inPoissy, FRANCE
Designed to automatically sample particulates on filters using a TSP, PM10, PM2.5 or PM1 inlet. PM162M is a sequential automatic sampling device for particulate matter in the ambient air. The particles are sampled at constant flow rate (1 m3/h or 2.3 m3/h) and collected on filters for gravimetric weighing and possible ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
Fully integrated solution for water content determination with volumetric Karl Fischer titration. OMNIS KF Titration is the high-end volumetric Karl Fischer titrator based on the modular OMNIS platform. With OMNIS KF Titration, determining water in samples has never been more convenient, safer, and ...
Manufactured by:Aerosol Devices, a Division of Handix Scientific based inFort Collins, COLORADO (USA)
The Series 110A Sequential Spot Sampler instrument enables affordable, time-resolved characterization of particulate chemical composition at multiple locations. It provides an uninterrupted collection of particulate matter (PM) as concentrated dry deposits into small sample wells. ...
Manufactured by:AMS Analitica based inPesaro, ITALY
The sampling sequential system is the reply to continuous requests for an easier to use tool without any locating and installation issue. The system concerns a derivate in anodized aluminum reducing dust passage friction to the minimum guarantying maximum sampling ...
Manufactured by:Aqualabo based inChampigny-sur-Marne, FRANCE
Ref: 70VI0501A. Wavelenghts range: 320 – 1100 nm. Spectrophotometer endowed with 86 pre-recorded methods including COD, nitrogen, nitrates, etc. in the visible range. The UVILINE stands out with high resolution and exceptional precision due to the reference beam, ideal for water quality analysis using its pre-recorded methods and accessories. Aqualabo’s Uviline spectrophotometers ...
Manufactured by:Markes based inBridgend, UNITED KINGDOM
The MTS-32 Multi-tube sequential sampler is a compact, robust, and portable sampler, designed for unattended sampling of air onto a series of sorbent tubes. Ambient air is pulled sequentially through a series of up to 32 industry-standard thermal desorption tubes by a low-flow sampling pump. Each tube is sampled ...
Manufactured by:Crowcon Detection Instruments Ltd based inMilton Park, UNITED KINGDOM
The multi-point system uses the same sampling arrangement as the single point system, but can monitor up to 16 separate sample lines on a sequential basis. The multi-point system provides a cost effective and low maintenance solution for monitoring gas hazards in buildings, pumping stations, storage areas etc. Each sample line is ...
Manufactured by:AMS Analitica based inPesaro, ITALY
The system has a 12 sorbent tubes supports, available for different tubes sizes and the flow range, allow the user to choice the applications with standard sorbent tubes (chemical desorption) and thermal desorption tubes in the 6,4x89 mm standard dimensions. A special option is dedicated to Formaldehyde DNPH sampling procedure, with the inlet and sampling line based with a inner copper tube, to ...
Manufactured by:AMS Analitica based inPesaro, ITALY
The AirCube HE sampler is able to satisfy the requirements foreseen by the EN-12341 and EN-14907 norms for PM10 and PM2.5 aerial-dispersed particles sampling, under the flow conditions foreseen of 38 liters per minute and is able of carrying out emissions samples both in the manual and in automatic mode thanks to the possibility of connection with the isokinetic parameter meter IsoFlow ...
Manufactured by:Aerosol Devices, a Division of Handix Scientific based inFort Collins, COLORADO (USA)
The Series 110A Liquid Spot Sampler instrument collects a concentrated suspension of particles into a small liquid-filled vial. The vial is designed with inlet and outlet ports so the user can configure it for on-line batch sampling of the particle suspension directly into a chemical or biological analyzer. A non-ported sample vial is also included. ...
Manufactured by:Met One Instruments Powered by Acoem based inGrants Pass, OREGON (USA)
The SASS and SuperSASS Speciation Samplers from Met One Instruments Powered by Acoem are designed to comply with and exceed EPA Speciation requirements. Two models provide a choice for compliance monitoring: SASS, a 5 channel sampling system; and SuperSASS, an 8 channel, multiple event sampling system. The SASS conforms to original EPA requirements and SuperSASS adds benefits suggested by ...
Manufactured by:AMS Analitica based inPesaro, ITALY
The era of samplings with long interminable settings can be considered over with the new AirCube COM2 TH portable sampler. With just a few operations in the user-friendly preparation menu the sampler is immediately ready for a new sampling process. ...
Manufactured by:AMS Analitica based inPesaro, ITALY
The high-volume sampler considered as “reference sampler” is the same used in EPA directive (see section 40 Part 50.11) for the same application. With regard to medium-volume samplers, the recommended impactor is - in this case as well - the one directly referred to in section A of the above mentioned EPA directive (Annex A). These PM10 and PM2,5 impactors obtained the certification ...
Manufactured by:Aerosol Devices, a Division of Handix Scientific based inFort Collins, COLORADO (USA)
The Series 110A Universal Spot Sampler provides maximum flexibility for aerosol research requiring a variety of analytical approaches. The common growth tube platform accommodates easy exchange between Liquid Spot and Sequential Spot Collector modules. ...
Manufactured by:AMS Analitica based inPesaro, ITALY
The GasCheck Basic sorbent tubes sampling devices, should be connected with a portable AirCube sampling pump, in both models COM2-TH and Gas-Pro. Each GasCheck basic, consist of 6 sorbent tube sampling support for standar chemical sorbent tubes or thermal desorption 6,35 mm OD sorbent ...
Manufactured by:AMS Analitica based inPesaro, ITALY
Easy to use, the Dustcheck DPM-1 PM sampler fit with all sampling needs. Based with a powerful aspirating diaphragm pump (the EPA version has built in a single head diaphragm pump) that allows the system to perform sampling in a constant flow option to compensate any pressure drop coming from overload samples. The new microprocessor capabilities allow the user to select and store in the memory up ...