Refine by
Servo Valve Equipment & Supplies
86 equipment items found
Manufactured by:EMG Automation GmbH based inWenden, GERMANY
Servo valves are the most important components in any electrohydraulic control system. Our rotary valve design with gap height control ensures minimum friction loss, high repetition accuracy and a large power range for single-stage valves. Based on our extensive experience with industrial applications and control hydraulics, we ...
Manufactured by:Parker Hannifin Corp based inCleveland, OHIO (USA)
These valves are a series of three- or four-way electrohydraulic servovalves (EHSVs) commonly used to control position, velocity, and force in a variety of hydraulic system, fuel system, and engine control applications. Driving aerospace hydraulic actuators or motors in closed-loop servosystems, the EHSVs provide flows to 10 GPM at 1000 psi drop across the valve. The first stage is driven by an ...
Distributed by:A&S Hydraulic based inChengDu, CHINA
The G631 series flow control servovalves are throttle valves for 3- and preferably 4-way applications. They are a medium performance, two-stage design that covers the range of rated flows from 1.0 to 20 gpm at 1,000 psi valve drop. The output stage is a closed center, four-way sliding spool. The pilot stage is a symmetrical doublenozzle and flapper, driven by a double air gap, dry torque motor. ...
Manufactured by:Technical Ltd based inVignate (MI), ITALY
The universal SV3 Series pneumatic servovalve make it possible to automate a line under pressure. This is achieved by employing either a pneumatic signal or manual action to activate the Three-way distributor which switches over the internal connections. The following configurations are available: automatic, with manual reset, bistable and manual. ...
Manufactured by:Chant Engineering Co. Inc. based inNew Britain, PENNSYLVANIA (USA)
Chant Model 9342-01 is a F-15K Servo Valve Test Stand designed to test 3 and 4-way electro-hydraulic and proportional valves. This unit allows operators to test in fully automatic, semi-automatic and manual modes. ...
Manufactured by:Chant Engineering Co. Inc. based inNew Britain, PENNSYLVANIA (USA)
Chant Model 840101 is a Hydraulic Servo Valve Torque Motor Test Stand designed to test the servo valve torque motor assemblies on aircraft servo valves, which is a sub-assembly of the servo valve. ...
Manufactured by:A. u. K. Müller GmbH & Co. KG based inDüsseldorf, GERMANY
2/2-way solenoid valve of nominal diameter DN 7, with integrated dirt strainer, for use with cold and heated potable water and physically and chemically similar media. The valve is servo-controlled and normally closed ...
Manufactured by:Eaton Corporation based inCleveland, OHIO (USA)
Built on the proven KB Servo Proportional Valve technology, Eaton’s next generation AxisPro™ proportional valve provides multiple levels of performance to meet the demands of a wide range of applications. These four-way solenoid operated proportional valves offer high dynamic performance which enables them to be used ...
Manufactured by:A. u. K. Müller GmbH & Co. KG based inDüsseldorf, GERMANY
2/2-way solenoid valve of nominal diameter DN 5 for use with cold and heated potable water as well as physically and chemically similar media. The valve is servo-controlled and normally closed ...
Manufactured by:A. u. K. Müller GmbH & Co. KG based inDüsseldorf, GERMANY
2/2-way solenoid valve of nominal diameter DN 5 for use with cold and heated potable water as well as physically and chemically similar media. The valve is servo-controlled and normally closed ...
Premium
Manufactured by:Continental Controls Corporation (CCC) based inSan Diego, CALIFORNIA (USA)
TheALV10 is an intelligent electronic Liquid Fuel valve designed to meet the needs of all Gas Turbine applications. It’s speed and stability allow it to be used for either Power Generation or Mechanical Drive applications that range in size from 250KW to 35MW. The ALV10 is a unique design with an onboard computer and internal flow meter. The valve will ...
Manufactured by:Jansens Aircraft Systems Controls Inc. (JASC) based inTempe, ARIZONA (USA)
The Inlet Guide Vane Actuator (IGVA) has a direct acting, 3-way clevis-type, servo valve used for actuation with an LVDT to provide position feedback. The servo valve fueldraulically drives the actuator rod. The Inlet Guide Vane Actuator is mounted on an aircraft Auxillary Power Unit (APU) and used to control the position of a ...
Manufactured by:Hy-Pro Filtration based inAnderson, INDIANA (USA)
PF2 in-line or manifold mount pressure housing max recommended operating 4000 psi / 207 bar. Ideal for protecting servo valves and other low flow sensitive components. Available in bypass or non-bypass ...
Manufactured by:Gresham Gas Sampling based inCamberley, UNITED KINGDOM
Accurate load limiting of servo controlled asymmetric actuators has been problematic since the servo valve was invented over 50 years ago. Conventional relief valves, whether limiting the individual actuator chamber pressures or the difference between them (cross port), cannot be set to limit the actuator load because the output ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
The Model 13120 Hydraulic Controller (servo valve) is specifically designed for any control system applications that require high performance hydraulic control or continuous servo valve actuation. The Dynaguide* Hydraulic Controller accepts electrical or pneumatic signal inputs from primary sensors. ...
Manufactured by:Zinga Industries Inc based inReedsburg, WISCONSIN (USA)
Zinga pressure filters provide in-line system protection for sensitive system components like servo valves, pressure filters can be found in agriculture equipment, road machinery, utility and construction systems and industrial ...
Manufactured by:Zinga Industries Inc based inReedsburg, WISCONSIN (USA)
Zinga pressure filters provide in-line system protection for sensitive system components like servo valves, pressure filters can be found in agriculture equipment, road machinery, utility and construction systems and industrial ...
Manufactured by:EMG Automation GmbH based inWenden, GERMANY
The HST system is supplied by the central hydraulic system or a hydraulic power pack (HA). The main component of the hydraulic control system is the EMG servo valve ...
Manufactured by:Hy-Pro Filtration based inAnderson, INDIANA (USA)
All hydraulic and lube systems have a critical contamination tolerance level that is often defined by but not limited to, the most sensitive system component such as servo valves or high-speed journal bearings. Defining the ISO fluid cleanliness code upper limit is a function of component sensitivity, safety, system criticality and ultimately getting the most out ...
Manufactured by:Zinga Industries Inc based inReedsburg, WISCONSIN (USA)
Zinga pressure filters provide in-line system protection for sensitive system components like servo valves, pressure Spin-on filters are used as process and safety filters to protect individual pumps, valves or the entire hydraulic circuit from contamination as measured per ISO 4406. ...