Refine by
Sewer Coupling Equipment & Supplies
9 equipment items found
Manufactured by:Mission Rubber Company LLC based inCorona, CALIFORNIA (USA)
Flexible, unshielded sewer couplings connect similar and dissimilar pipe materials and sizes in Clay, Type O Clay, Cast Iron, TYPE O Cast Iron, Schedule 40 Plastic, Thinwall Plastic, Ductile Iron, Asbestos Cement, Concrete, Tubing or Copper pipe. For non-pressure, gravity flow applications only. ...
Manufactured by:Mission Rubber Company LLC based inCorona, CALIFORNIA (USA)
Designed for the repair, alteration and rehabilitation of large diameter gravity flow sanitary, DWV and storm sewer ...
Manufactured by:Mission Rubber Company LLC based inCorona, CALIFORNIA (USA)
Flexible “Calder Style” shielded sewer couplings connect Clay, Type O Clay, Type 1 Clay, Extra Heavy Cast Iron, CIT, Schedule 40 Plastic, Thinwall Plastic, Trailer/Drain (EPDM) or Steel pipe in sanitary systems. For non-pressure, gravity flow applications only. Recommended for underground installations. ...
Manufactured by:Mission Rubber Company LLC based inCorona, CALIFORNIA (USA)
Flexible, “Calder Style” unshielded sewer couplings connect Clay, Type O Clay, Type 1 Clay, Extra Heavy Cast Iron, CIT, Plastic, Schedule 40 Plastic, Thinwall Plastic, Trailer/Drain (EPDM) or Steel pipe in sanitary systems. For non-pressure, gravity flow applications only. ...
Manufactured by:JCM Industries, Inc. based inNash, TEXAS (USA)
A full circumferential clamp coupling to join and repair various types of sewer pipe, single and multi-band versions. Sizes 4″ – ...
Manufactured by:Amiblu Holding GmbH based inKlagenfurt am Wörthersee, AUSTRIA
Alternative coupling for sewer and stormwater applications with Hobas ...
Manufactured by:Naylor Industries Plc based inWombwell, UNITED KINGDOM
Our Standard Flexible Couplings comply with the requirements of WIS 4-41-01 and are specifically designed for jointing pipes in sewerage, drainage and similar non-pressure applications where resistance to shear loads is required. ...
Manufactured by:Pipefusion Services Inc. based inHuntsville, ONTARIO (CANADA)
Electrofusion is a method of joining HDPE and other plastic pipes with special fittings that have built-in resistive wire which is used to weld the joint together. The pipes to be joined are trimmed, cleaned, inserted into the electrofusion fitting (with a temporary clamp if required) and a voltage (typically 40V) is applied using a device called an electrofusion processor. The processor controls ...
Manufactured by:Joints Couplings (JC) based inEl Monte, CALIFORNIA (USA)
Calder Slip Couplings deliver professional-grade pipe connections specifically designed for sewer and drainage infrastructure. Starting at 4 inches (100 mm) in diameter and available in custom sizes, these widely accepted couplings connect pipes of different materials from 1.5" to 96" diameter while accommodating ground movement, pipe settlement, ...