Refine by
Applications
- Flow Meters for Water Transfer and Produced Water
- Flexible Pillow Tanks for Potable and Pluvial Water
- Flexible Pillow Tanks for Liquid Fertilizers
- Flexible Pillow Tanks for Slurry, Leachates and Brines
- Centrifugal Slurry Pump for Hard Rock Mining
- Centrifugal Slurry Pump for Mineral Mining
- Centrifugal Slurry Pump for Industrial Process
- Chemical dewatering for municipal wastewater plants
- Chemical dewatering for paper mills
Slurry Effluent Equipment & Supplies
30 equipment items found
Manufactured by:Flo-Corp based inMedina, OHIO (USA)
The FLO-CORP ChannelFlo™ OCRM Guided Wave Radar Open Channel Flow Meter features time domain reflectometry (TDR) technology and provides continuous level measurement in liquids, solids, and slurries, from clarifier effluent to large rivers. ...
Manufactured by:UK Flowtechnik Ltd based inNottingham, UNITED KINGDOM
With an epoxy coated Steel or Stainless Steel body and IP67 enclosure rating, 2 liner and 2 electrode material options, thick or thin, clean or dirty, it can be measured. Whether it is clean water, industrial effluent, slurries, acids or bases there is a material combination to ...
Manufactured by:ALAR Engineering Corporation based inMokena, ILLINOIS (USA)
ALAR’s Flex-O-Star® solid liquid separation system provides comprehensive wastewater treatment for water-based effluents, slurries, and problem wash waters. The design is universal and works with virtually any industrial liquid waste. The entire process of the Flex-O-Star® is automatic, which is built on a structural steel skid, pre-piped and ...
Manufactured by:Pollution Control (UK) Ltd based inPreston, UNITED KINGDOM
The SD Groundhog mechanical Separator produces an easily stackable solid plus a free flowing liquid. Effluent or slurry enters the Separator inlet chamber and is slowly brushed the full length of the perforated screen to remove most of the liquid before entering the second stage where the remaining solids are double pressed to ensure the maximum amount of liquid ...
Manufactured by:Flying W Plastics Inc. based inGlenville, WEST VIRGINIA (USA)
Applications include water transport, municipal sewage, domestic sewage, landfills, industrial process liquids, effluent, and slurries. All municipal and industrial pipe is manufactured from select PE4710 resins that meet or exceed the pressure ratings and physical properties of PE3608 and PE3408 resins. I.P.S. and D.I.P.S. pipe can be easily connected by fusion ...
Manufactured by:PHOENIX Process Equipment Co. based inLouisville, KENTUCKY (USA)
PHOENIX has designed systems for thickening and dewatering effluent slurries since 1984. Our auto/CHEM™ System Automation responds quickly to varying feed conditions for consistent dewatering performance and overflow water quality. Improving performance while reducing labor input, PHOENIX incorporates sensing, monitoring, and modulating equipment and ...
Manufactured by:PHOENIX Process Equipment Co. based inLouisville, KENTUCKY (USA)
The PHOENIX Model HG Separator combines hydrocyclone and dewatering screen technology to effectively recover discarded fine sand from wash plant effluents. The dewatering fines are conveyable, stackable and potentially marketable. The Model HG overflow is suitable for ponding, or thickening and then dewatering on PHOENIX belt filter presses. Fines effluent ...
Manufactured by:Cleartek Filters (P) Ltd based inCoimbatore, INDIA
Capacity: 100 M3/HR, Pressure : 24 Bar, Temperature : 200°C, Viscosity : 1,00,000 ...
Manufactured by:Cleartek Filters (P) Ltd based inCoimbatore, INDIA
Capacity: 100 M'/HR, Pressure : 24 Bar, Temperature : 200°C, Viscosity : 1,00,000 ...
Manufactured by:Fluid Technologies (Environmental) Ltd. (FTL) based inKingston upon Thames, UNITED KINGDOM
TurbEx™ three phase fluid bed Cooling Towers use an improved cooling variant of the technology originally developed for the TurboScrubber® gas scrubbing system which simultaneously absorbs toxic gases, removes very-fine sub-micron partıculates and can be used to recover heat by direct gas-liquid heat ...
Manufactured by:Carmeuse Americas based inPittsburgh, PENNSYLVANIA (USA)
In the MEL process, lime reagent, containing calcium hydroxide (Ca(OH)2) and magnesium hydroxide (Mg(OH)2), is used to react with the SO2. As with the LSFO process, the hydroxide slurry is added to the recycle tank to replenish reagent consumed under pH control of 6 to ...
Manufactured by:Amerigo Exports Pvt Limited based inAhmedabad, INDIA
A Progressive Cavity Pump is a type of a positive displacement pump which has a rotor rotating within a housing called a stator. The rotor is always metallic and the stator is made up of a rubber type of material. It looks somewhat like a screw thread – the fluid is between the cavities and the rotary motion of the rotor forces the fluid through from one end to the ...
Manufactured by:Fluid Technologies (Environmental) Ltd. (FTL) based inKingston upon Thames, UNITED KINGDOM
TURBOSCRUBBER FTL/Osprey's TurboScrubber breakthrough fluid bed technology, the unrivalled system for mass transfer, heat transfer and simultaneous fine particulate ...
Manufactured by:Osprey Corporation Ltd based inWhitstable, UNITED KINGDOM
Osprey/FTL’s fluidised bed TurboPak and Turboid technology at the heart of the TurboScrubber® design has shown exceptional ability to simultaneously absorb gaseous components, transfer heat and remove fine dust and soot particles across a wide range of industrial ...
Manufactured by:Sattler Ceno TOP-TEX GmbH based inGreven, GERMANY
SATTLER CENO has specialized in the manufacture of lagoons for the storage of slurry for more than two decades and since 2002 the company has been in possession of all relevant general approvals for manure, slurry and silage. Thanks to the outstanding quality of the material and to the cutting-edge manufacturing and welding technology, hundreds of lagoons manufactured by SATTLER CENO are ...
Manufactured by:Sujal Engineering based inAhmedabad, INDIA
Sujal Engineering is a leading manufacturer of SPP Series – Known as Polypropylene Pumps. Our polypropylene pumps are designed especially for high corrosive chemicals where metal are not recommended or its cost is high. This pumps are centrifugal corrosion resistant with horizontal radially split one piece volute casing design fitted with semi open impeller single entry single ...
Manufactured by:Flexicisternas - Reimpar Geoinstalaciones based inParadas (SEVILLA ), SPAIN
Our flexible pillow tanks used for liquid storage such as water storage, are made with the highest quality materials. The design and execution of the Flexicisternas are made with the help of automatic machines that join the material by termofusion. Our flexible pillow tanks for liquid storage are an excellent solution for different corporate areas. ...
Manufactured by:Schurco Slurry based inJacksonville, FLORIDA (USA)
Schurco P Series are designed to provide exceptional performance in high head mine dewatering as well as general dewatering applications. Single pumps can achieve heads over 50% higher than standard slurry pumps. These dewatering pumps are ideal for dirty water and light slurry (slurry specific gravities of roughly 1.05), and provide the end user with the ultimate in ...
Distributed by:farmatic tank systems based inNortorf, GERMANY
FARMATIC slurry tanks are offered in various individual sizes. They guarantee secure storage at low cost. Additionally, their longevity and easy expansion or disassembly make them the moste flexible choice when it comes to liquid storage for ...
Manufactured by:SLB based inSugar Land, TEXAS (USA)
Oil-based fluid treatment process enables reuse of expensive fluids; The RHE-USE system enables operators to reuse invert emulsion drilling fluids over multiple wells without relying on reclamation through high rates of dilution. The process treats oil-based drilling fluid, reducing solids below 1% while drilling. Before the introduction of the RHE-USE system, combating the buildup of ultrafine, ...