Refine by
Soft Soil Sampling Equipment & Supplies
11 equipment items found
Premium
Manufactured by:Geonor AS based inØsterås, NORWAY
K- 200 54mm sampler, steel cylinder, The K-200 model is supplied with a steel sample cylinder. Sample length 500 to 800 ...
Premium
Manufactured by:Geonor AS based inØsterås, NORWAY
54mm sampler, plastic cylinder, K-100 Effective sample length for the K-100 model is 700 mm. The sampler can be used on drilling rigs without dismantling the rods and sampler between each sampling. The K-100 model is equipped with interchangeable edges. A thin-walled edge for undisturbed samples in silt and clay, and a coarse edge for sandy soils. Sample catcher can be used together with the ...
Premium
Manufactured by:Lone Star Drills. a Little Beaver Company based inLivingston, TEXAS (USA)
The LST1G+ geotechnical rig is ideal for soil sampling, geotechnical testing and well monitoring in limited-access areas. The unit’s 4-inch-diameter auger drills 6-inch boreholes to 100 feet. The setup includes a tower, cathead and pulley to facilitate standard penetration testing with a 140-pound manual safety hammer. Additionally, the drill’s 5,000-pound lifting capacity ensures ...
Premium
Manufactured by:Lone Star Drills. a Little Beaver Company based inLivingston, TEXAS (USA)
The LST1G+HD geotechnical drill rig offers enhanced power and capabilities compared to the LST1G+, including a planetary reduction gearbox for up to 1,100 foot-pounds of torque, increased pull/push-back force and a strengthened steel frame. The drill includes a tower, cathead, pulley and 140-pound manual safety hammer to facilitate standard penetration testing. A 25-horsepower Honda gas engine ...
Premium
Manufactured by:Lone Star Drills. a Little Beaver Company based inLivingston, TEXAS (USA)
The LST1A+ features an auger head drive in place of the water swivel found on the LST1 and LST1+, making it ideal for auger drilling and soil sampling. Its swivel base design swings the rotary aside for quick, easy access to the borehole. The unit is capable of drilling 6-inch boreholes up to 100 feet deep in normal soils using the standard auger and up to 50 feet with the hollow stem auger. An ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
The one-piece gouge auger set for soft soils is used for sampling to a depth of 1 metre. The set contains two gouge augers with different lengths but the same diameter, and produces undisturbed samples which makes it suitable for various types of profile ...
Manufactured by:Hoskin Scientific Limited based inBurnaby, BRITISH COLUMBIA (CANADA)
The stainless steel peat sampler is in fact a kind of gouge auger. The peat sampler is pushed into the soil manually. The sample containing part is a half cylinder. The peat sampler distinguishes itself from the standard gouge auger as its cone is massive. The sample containing section is sealed off by a plate (fin) that can pivot around the axle ...
Manufactured by:Bartz Technology Corporation based inCarpinteria, CALIFORNIA (USA)
VSI soil core sampler - We offer a complete set of soil coring equipment, manufactured according to long-term experience and field approved. The soil core sampling equipment is used to collect relatively undisturbed soil core samples for soil profile description, soil sampling, root biomass determination and other environmental investigations including soil chemical and physical ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
The stainless steel peat sampler is in fact a kind of gouge auger. You can easily push the peat sampler into the ground by hand. The sample containing part is a half cylinder. The peat sampler distinguishes itself from the standard gouge auger as its cone is ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
The liner sampler set for soft soils, with bayonet connection, allows undisturbed soil samples to be taken in a liner. This is executed by applying a stainless steel core sampler with sample tubes and cutting head. In soft soils the sampler is pushed into the ...
Manufactured by:CDS Analytical based inOxford, PENNSYLVANIA (USA)
The 8500A autosampler is a 110 position autosampler with dynamic headspace sampling function for EPA methods 524, 624 and 8260 (both water and soil), and built on our 3rd generation autosampler with a faster and smarter sample loading. A perfect match for the 8500C Purge & Trap concentrator with integrated software ...