Refine by
Applications
- Gas Analysers and Sampling System for Combustion Control & Flue Gas
- Gas Analysers and Sampling System for Power Plants
- Gas Analysers and Sampling System for Nitrogen, Hydrogen, Oxygen Generators
- Gas Analysers and Sampling System for Technical Gas
- Gas Analysers and Sampling System for Drying Processes
- Gas Analysers and Sampling System for Heat Treatments
- Gas Analysers and Sampling System for Iron & Steel Industry
- Lithium Iron Battery Solutions for Residential and Industrial Energy Storage Systems
- Sustainable energy solutions for e-bike/e-scooters areas
- Sustainable energy solutions for drones areas
- Sustainable energy solutions for power storage sector
Solid Electrolyte Equipment & Supplies
124 equipment items found
Manufactured by:Solid Power based inLouisville, COLORADO (USA)
Solid Power’s all-solid-state batteries remove the flammable liquid electrolyte and polymer separator layer in a traditional lithium-ion battery and replace it with a solid layer. This thin, solid layer acts as a barrier to keep the anode and cathode from touching one another, which would short the battery. ...
Manufactured by:Zhengzhou Winsen Electronics Technology Co., Ltd. based inZhengzhou, CHINA
Chemical Sensor MG-811 adopts solid electrolyte battery principle to detect carbon dioxide. When the sensor is placed in the CO2 environment, the electrode reaction occurs between the battery positive and negative electrode, and electromotive force is generated between the sensor sensitive electrode and reference electrode. ...
Manufactured by:AMG Lithium GmbH based inFrankfurt/Main, GERMANY
AMG Lithium GmbH specializes in the development and production of sulfidic solid electrolytes, which are pivotal for advancing the capabilities of all-solid-state lithium-ion batteries. These electrolytes present enhanced safety and performance, with potential improvements in energy density, lifecycle, and charging efficiency ...
Manufactured by:Ampcera Inc. based inMilpitas, CALIFORNIA (USA)
Commercially available Ampcera™ solid-state electrolyte materials include sulfides (e.g. engineered Argyrodite, LGPS, LSPS, etc.), garnet-structure oxides (e.g. engineered LLZO), and more. ...
Manufactured by:Henan Fosen Electronics Technology based inZhengzhou, CHINA
FS00306 is a sensor used to monitor carbon dioxide concentrations. Based on the principle of solid electrolyte, it fundamentally solves the problem of infrared carbon dioxide sensors being easily affected by water vapor interference, and has characteristics such as high stability and strong environmental adaptability. It is particularly suitable for special ...
Manufactured by:Henan Fosen Electronics Technology based inZhengzhou, CHINA
FS00303 is a type of sensor used to monitor carbon dioxide concentration. It is based on the principle of solid electrolyte, which fundamentally solves the problem of water vapor interference in infrared carbon dioxide sensors. It has high stability and strong environmental adaptability, making it particularly suitable for special environments such as ...
Manufactured by:Pittas Dragnis Ltd based inThesi Bota, GREECE
Solid round conductor electrolytic copper (Cu-E). Used in earthing systems (foundation - ...
Premium
Manufactured by:Hangzhou Chunlai Technology CO., Ltd. based inHangzhou, CHINA
HM-100(IV) adopts advanced Solid State Zirconia Electrolyte Measurement Technology. The core sensor employs structure design of high-temperature resistance (max temperature of 900?) that can work stably in high-temperature environment for a term. The product owns features of high temperature resistance, high measuring accuracy, strong corrosion resistance, fast ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
Depending on your cell size and design you can add either a B&W Tek Raman Video Micro-Sampling System (532 nm), or the B&W Tek Raman Probe Holder. Get ready to track age-induced structural changes, electrolyte decomposition, and solid electrolyte interphase (SEI) formation with your EC-Raman Battery Solution. It is easy to get started, ...
Premium
Manufactured by:Synspec BV based inGroningen, NETHERLANDS
Synspec supplies the HYDRO50R product line of High Purity Hydrogen Generator modules for FID and CARRIER GAS for GC, to fit almost any type of application which needs H2 production close to the consumer. Based on the field proven Solid Polymer Electrolyte (PEM) cell technology, pure Hydrogen is produced at low pressure from electricity and high quality distilled ...
Premium
Manufactured by:Hangzhou Chunlai Technology CO., Ltd. based inHangzhou, CHINA
HM-100(III) Heat Tracing Hygronom adopts advanced Dry & Wet Oxygen Technology. It is equipped with solid state electrolytic ceramic sensing system and the core sensor adopts high temperature resistance design (maximum temperature can reach 900?). It can work in high temperature for a long term. The product owns advantages of high temperature resistance, high ...
Premium
Manufactured by:Synspec BV based inGroningen, NETHERLANDS
The FID Station is composed of a High purity Hydrogen generator and an Ultra Zero Air generator with on board Air compressor. Based on the field proven Solid Polymer Electrolyte (PEM) cell technology, pure Hydrogen is produced at low pressure from electricity and high quality deionized water. It is available 24/7 with constant purity >99.999%. Output pressure ...
Premium
Manufactured by:MRU Messgerate fur Rauchgase und Umweltschutz GmbH based inNeckarsulm-Obereisesheim, GERMANY
Using heated ZrO2 sensor for wet O2 analysis up to 600°C flue gas temperature. With optional special heated solid electrolyte sensor for combustibles measurement ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
Robust digital pH sensor for operation on TriBox controllers and HS100 DIN G2 rail module. Digital communication provides safe and trouble-free signal transmission from the sensor to the controller. The high-quality gel pH electrode has a hole diaphragm and is insensitive to dirt, making the sensor ideal for wastewater ...
Premium
Manufactured by:MRU Messgerate fur Rauchgase und Umweltschutz GmbH based inNeckarsulm-Obereisesheim, GERMANY
The O2 and COe monitor is dedicated for continuous combustion optimisation at: various industrial furnaces/ovens/boilers, with hazard of explosive atmosphere, petroleum refinery plants, petrochemical plants, gas separation, blast furnace, coke oven or ther syngas plants. ...
by:Korea Digital Co., Ltd. based inGuro-gu, SOUTH KOREA
Model: KCD-ON310. Mearsuring method: Solid electrolytes (Zirconia). Measurement range: 0.1~25.0 Vol.%. Output signal: RS485, 0~10Vdc, 4~20mA. Power supply: 24V DC. Dimensions: ?53mm x H53mm. Connection terminal & Cable's external dimensions is ...
Manufactured by:NGK Spark Plug Europe Gmbh based inRatingen, GERMANY
This oxygen sensor is comprised of a zirconium-dioxide-based solid electrolyte. The output signal is generated by oxygen ions, which pass through the element. The zirconium dioxide lambda sensor is distinguished by the following ...
Manufactured by:Euro-Gas Management Services Ltd. based inChurston Ferrers, UNITED KINGDOM
The latest in Hydrogen electrochemical technology utilises solid electrolyte, which offers a number of benefits over acid electrolyte. The sensors are available as single micro, raw, nano or standard 3-pin sensors, in combination with analogue and 4-20mA transmitters or as complete PVC or aluminium housed solutions. The Hydrogen SS sensor is a ...
Manufactured by:Bluewater Lab Pte. Ltd. based inSingapore, SINGAPORE
The ASP2210 pH sensor is designed with advanced features including a ring type PTFE reference liquid boundary, double liquid junction, solid electrolyte, and a specialized glass sensitive film. These components work together to enhance the sensor's reaction speed and resistance to pollution. The sensor's performance is comparable to similar high-performing ...
Distributed by:Fuel Cell Store based inCollege Station,, TEXAS (USA)
Proton exchange membranes are also known as cation exchange membranes in the market. These PFSA membranes performs as a separator and solid electrolyte (without the need of a liquid acid) in a variety of electrochemical cells that require the membrane to selectively transport protons or other various cations across the cell junction (or between anode and cathode ...