Refine by
Applications
- Filter solution for chlorine production - wet chlorine sector
- Filter solution for chlorine production - dry chlorine sector
- Filter solution for chlorine production - hydrogen stream sector
- Filter solution for NaOH stream duty sector
- Filter solution for phosphoric acid industry sector
- Filter for Gas Cleaning - Indirectly Heated Oven Fume Filtration System
- Portable and fixed gas analysers for remediation and groundwater
Solid Liquid Extraction Equipment & Supplies
27 equipment items found
Manufactured by:Begg Cousland Envirotec Limited based inGlasgow, UNITED KINGDOM
Rotating table type vacuum filters are used for handling of solids / liquid extraction, especially for the phosphate fertiliser industry. These complex filters have been made by Jiangsu New Hongda since 2000. In 2005 alone, there were 40 made for the domestic China market. A wide range of filter sizes is available, and the biggest size so far ...
Manufactured by:UD Technologies based inVadodara, INDIA
Rotary Vacuum Evaporator 5 liter is designed and developed for Solvent removal and concentrate for Heat Sensitive Materials. Rotary Extractor 5 liter is its variant in which Simultaneous Solid-Liquid Extraction and Concentration of Extract takes place. This reduces Valued Operation Time. Considering Research and development ...
Manufactured by:SMTlabtech based inNingbo, CHINA
12/24 hole SPE Vacuum Manifolds Solid phase extraction device Product introduction: Solid-Phase Extraction (SPE) is a sample pretreatment technology based on liquid-solid separation and extraction, which is developed from the combination of ...
Manufactured by:B&P Littleford based inSaginaw, MICHIGAN (USA)
In Liquid Solid Separation, or Liquid-Solid Extraction, a solvent (hydrophilic or hydrophobic, acidic, neutral or basic) is added to a solid forming a slurry. Insoluble material can be separated by gravity or vacuum filtration, and soluble material is "extracted" into the ...
Manufactured by:BRS Biotech based inMasala, FINLAND
BRS high-speed tubular centrifuges are designed for applications where a continuous process of separation is required, be it liquids and solids separation, extraction, concentration and clarification of substances with high viscosity, separation of solids with small volume fractions, caustic substances and other fields of ...
Distributed by:a1-envirosciences GmbH based inDüsseldorf, GERMANY
a1-envirosciences is proud to introduce the AquaFAST – a revolutionary automated Karl Fischer analysis system. The unique AquaFAST system, which can perform automated moisture analysis on solids by methanol extraction, liquids by direct injection, and oils either by injection or using an oil vaporiser utilising Karl Fischer titration. With ...
Manufactured by:IFLUIDTEC based in, CHINA
The Subcritical Water Extraction System (SWE) is an advanced extraction technology that operates at temperatures between 100 and 374 degrees Celsius, under pressures high enough to maintain water in its liquid state. This method leverages water's unique properties, such as its high dielectric constant and polarity, along with a significant ...
Manufactured by:GenPore a Division of General Polymeric Corporation based inReading, PENNSYLVANIA (USA)
As a leader in porous plastics, GenPore has developed a unique technology to manufacture liquid chromatography and solid phase extraction (SPE) frits at very competitive ...
Manufactured by:SepSolve Analytical - a company of the Schauenburg International Group based inHampton, UNITED KINGDOM
At SepSolve we offer a range of sample preparation robots to increase the productivity, reproducibility and flexibility of your GC–MS analysis. All PAL systems are subjected to a 24-hour reliability test before leaving the factory, so confident unattended analysis is ...
Manufactured by:Tournaire S.A. based inGrasse Cedex, FRANCE
Tournaire has developed a range of stationary or stirred batch extractors for the processing of an extremely varied range of raw materials: from the most fragile flowers to bulk or crushed materials, for the perfume industry, pharmaceuticals or the food processing ...
Manufactured by:ECH Elektrochemie Halle GmbH based inHalle (Saale), GERMANY
The AQUA 40.00 basic module is the essential device for microcoulometric water determination according to Karl-Fischer-Titration in liquid samples and ...
Manufactured by:Aurora Biomed Inc. based inVancouver, BRITISH COLUMBIA (CANADA)
VERSA Solid Phase Extraction (SPE) workstations fully automate SPE workflow from cartridge conditioning to sample derivatization on a single deck with innovative modules. With options to have both Positive Pressure and Vacuum Manifold, VERSA ensures efficient flow of samples and reagents through cartridges. The combination of ReagentDrop, Heater-Shaker, Gripper and Nitrogen Dryer result ...
Manufactured by:MedChemExpress LLC (MCE) based inMonmouth Junction, NEW JERSEY (USA)
Bayogenin is an alfalfa saponin, shows moderate potency of glycogen phosphorylase ...
Manufactured by:Dolphin Centrifuge based inWarren, MICHIGAN (USA)
An industrial centrifuge is a separation machine that uses centrifugal force to separate solids from liquids. A centrifuge exerts a centrifugal force that is thousands of times that of gravity. This force causes the immediate separation of solids from liquids. And, in the case of immiscible liquids with different densities, it separates the fluids as well. You can think of an industrial ...
Manufactured by:Aurora Biomed Inc. based inVancouver, BRITISH COLUMBIA (CANADA)
The 15-positioned modular deck configuration with options such as magnetic bead vortex, shaker-heater-magnet elevator and ReagentDrop allow optimization to an extremely wide variety of protocols. Optional independent Z-axis movement allow for working with samples of varying volumes. Combined with highly accurate liquid handling technology, the VERSA 1100 eliminates cross-contamination. ...
Manufactured by:Guangdong Grande Automatic Test Equipment Limited based inGuangdong, CHINA
It is mainly used in the degreasing [wax) process before sintering of stainless steel-based an d iron-based powder metallurgy injection molding (MIM) products. Directional airflow degreasing. enhanced degreasing effect, and more thorough ...
Manufactured by:Sinfines Factory based inL`Aldea, SPAIN
Designed for the separation and cleaning of sand and grit. A grit classifier is commonly used to separate sand, grit and solid debris and to extract liquids with an auger conveyor. During the extraction process, grit and dirt from organic residues can be removed through pulverisation with water during the transportation process ...
Manufactured by:MedChemExpress LLC (MCE) based inMonmouth Junction, NEW JERSEY (USA)
Cloethocarb is an active ...
Manufactured by:MedChemExpress LLC (MCE) based inMonmouth Junction, NEW JERSEY (USA)
Hexapeptide-3isa bioactive peptide with repair skin effect and has been reported used as a cosmetic ...
Manufactured by:QED Environmental Systems, Inc based inDexter, MICHIGAN (USA)
The product is separated through liquid flow by passing through a media pack allowing for product, water, solids separation oven a given time, maximum flow rate for the unit being no greater than 60Lt ...