Refine by
Applications
- Advanced FT-NIR Analysis for Food Industry
- FT-NIR Analaysis for alcoholic beverages industry
- Advanced FT-NIR Solutions for Pharmaceutical Development and Manufacturing Sector
- FT-NIR analaysis for chocolate & cocoa sector
- FT-NIR analaysis for fish & seafood sector
- FT-NIR analysis for coffee sector
- FT-NIR analysis for measuring meat products sector
- FT-NIR spectroscopy in rapid detection of paprika adulteration sector
- FT-NIR spectroscopy in sugarcane liquor industry
- FT-NIR analaysis for meat & poultry industry
- FT-NIR analaysis for non-alcoholic beverages sector
- FT-NIR analaysis for snack food industry
- FT-NIR analaysis for spices & raw ingredients sector
- Detecting melamine adulteration in milk powder sector
- FT-NIR analysis for pharmaceutical raw material identification sector
- FT-NIR analysis for verifying raw materials through plastic and paper packaging industry
- Advanced FT-NIR Analysis for Chemicals & Polymers Industry
- Near-Infrared Analysis for Edible Oil Sector
- Near-Infrared Analysis for Rice Sector
- Advanced FT-NIR Solutions for Tobacco Processors and Manufacturers Sector
- Advanced FT-NIR Analysis for Agricultural Industry
- Monitors, gas analyzers solutions for semiconductor / microelectronics sector
- Monitors, gas analyzers solutions for ISO 14644-1/2: 2015 insights & solutions
- Mass Spectrometry Tool for Maldi Imaging Industry
- Advanced FT-NIR Analysis for Feed & Forage Sector
- Comparing Hole Extraction Efficiencies in Perovskite Solar Cells using Photoluminescence Quantum Yield
- Electroluminescence and Photoluminescence Spectroscopy of a Phosphorescent Organic Light Emitting Diode (PhOLED)
- Energy Transfer in a Liquid Scintillator Investigated using Time-Resolved X-ray Excited Luminescence Spectroscopy
- Sn to Mn Energy Transfer Revealed using Time-Resolved Emission Spectroscopy (TRES)
- Fluorescence, Delayed Fluorescence and Phosphorescence Spectra of a TADF Emitter Measured using the FLS1000 with a VPL laser and Gated PMT Detector
- Photoluminescence Spectroscopy of Carbon Dots
- Ligand Binding Assays on the Basis of Fluorescence Anisotropy
- Measuring Picosecond Fluorescence Lifetimes Using the FLS1000 Equipped with a Hybrid Photodetector
- Tuning the Photoluminescence of Graphene Oxide
- Measuring Charge Carrier Lifetime in Perovskite Solar Cell Materials Using Time-Resolved Photoluminescence Spectroscopy
- Time-resolved Spectroscopy of Phosphorescent Oxygen Sensors in a Relevant in vitro Environment for Biomedical Applications
- Luminescence Thermometry with Upconversion Materials
- Determination of Chromaticity Coordinates and Bandgaps of III-V LEDs Using Electroluminescence Spectroscopy
- Time-Resolved Electroluminescence Spectroscopy of a White Light Emitting Diode
- Observing Phase Transitions in a Halide Perovskite Using Temperature Dependent Photoluminescence Spectroscopy
- Temperature-Dependent Quantum Yield of Fluorescence from Plant Leaves
- Measuring Charge Carrier Lifetime in Halide Perovskite Using Time-Resolved Photoluminescence Spectroscopy
- Study of Fluorescence Quenching Kinetics Using Stopped-Flow
- Kinetics of Persistent Luminescence Phosphors
- Temperature Dependence of Phosphors via Photo-and Thermo-Luminescence
- Charge Carrier Recombination Dynamics of Semiconductor Photocatalysts
- Time Resolved Fluorescence Techniques to FRET Based Immunoassay
- Lipid-Protein Interactions Revealed by Fluorescence Spectroscopy
- Medical solutions for stomatology sector
- Medical solutions for phlebology sector
- Medical solutions for proctology sector
- Gas monitoring and dust monitoring for the powerplants industry
- Gas monitoring and dust monitoring for the cement industry
- Gas monitoring and dust monitoring for the iron / steel industry
- Gas monitoring and dust monitoring for chemical industry
- Gas monitoring and dust monitoring for fertilizer industry
- Gas monitoring and dust monitoring for pulp and paper industry
- Gas monitoring and dust monitoring for the aluminium industry
- Gas monitoring and dust monitoring for the enviromental industry
- Gas monitoring and dust monitoring for the nickel industry
- Gas monitoring and dust monitoring for the LNG industry
- Gas monitoring and dust monitoring for the natural gas industry
- Gas monitoring and dust monitoring for the refinery industry
- Gas monitoring and dust monitoring for the nuclearpower industry
- Gas monitoring and dust monitoring for the clean gases
- Meteorological sensors for aviation weather sector
Solid State Laser Equipment & Supplies
143 equipment items found
Manufactured by:LASOS Lasertechnik GmbH based inJena, GERMANY
The LASOS DPSS-XP Laser Series represents a sophisticated line of diode-pumped solid-state lasers developed over two decades. This series offers a broad wavelength range from 473 nm to 640 nm, catering to a variety of application needs in fields such as microscopy, holography, bioanalytical research, and quantum technologies. ...
Manufactured by:CLZ Optical Co., Ltd based inChangchun, CHINA
A biconvex lens is a positive lens characterized by a longer focal length in the middle and shorter focal lengths at both ends. These lenses are used in a wide variety of applications such as camera lenses, projectors, telescopes and microscopes. Bi-convex lenses are often used to expand light beams. In this article, we discuss the properties, functions, and applications of biconvex lenses for ...
Manufactured by:Power Technology, Inc based inAlexander, ARKANSAS (USA)
The Symphony series of lasers are high power diode pumped solid state laser systems (DPSS) that emit single frequency green laser light at 532nm. These systems are based on Power Technology’s patented iMAT laser technology providing diffraction limited beam quality, intrinsic single ...
Manufactured by:SOL instruments Ltd based inAugsburg, GERMANY
DF series represents a new generation of diode-pumped solid-state (DPSS) lasers that are more efficient than their lamp-pumped analogs. Perfection of laser design allows to eliminate the water cooling system, to reduce the overall dimensions, weight and power consumption while maintaining excellent laser output ...
Manufactured by:Raymetrics S.A. based inAthens, GREECE
Raymetrics S.A. together with National Technical University (Greece), Cilas (France) and Laser Centre of Hannover, LZH (Germany) designed, developed, manufactured, and tested a specific Diode-Pumped Solid State (DPSS) laser at 1064nm suitable for future ground-based, space altimetry and LIDAR ...
Manufactured by:Changchun New Industries Optoelectronics Tech. Co., Ltd.　 based inChangchun, CHINA
CNI Laser manufactures compact diode-pumped solid-state (DPSS) single frequency laser/single longitudinal mode lasers/narrow linewidth laser with narrow linewidth (less than 10-6 nm) and long coherent length (greater than 100 m). The laser operates in single longitudinal mode and ...
Manufactured by:Changchun New Industries Optoelectronics Tech. Co., Ltd.　 based inChangchun, CHINA
High power lasers include CW DPSS, pulsed DPSS Q-switched and CW diode laser. They are widely used in medical, scientific research, material processing and industrial applications. Available with 532 nm, 556 nm, 589 nm, 660 nm, 808 nm, 880 nm, 980 nm, 1064 nm,1319 nm, etc... Average power of 532 nm green laser can be up to 200 W and 1064 nm infrared laser can be up to 500 W. ...
Manufactured by:Changchun New Industries Optoelectronics Tech. Co., Ltd.　 based inChangchun, CHINA
The noise issues of lasers are due to the competition of mode in laser resonant cavity, which lead to high frequency jitter of output power. Through special design for laser resonant cavity and other components, the laser amplitude noise can be reduce efficiently. CNI low noise laser can be widely applied to DNA sequency, cell sorting, spectrum analysis, interference measurement, laser ...
Manufactured by:Changchun New Industries Optoelectronics Tech. Co., Ltd.　 based inChangchun, CHINA
MxL-S series DPSS lasers with features of good sealing, high output power stability, good beam profile, ultra compact, wide operating temperature, long lifetime, easy operating, working under the pressure of 0.02 kPa, which are widely used in DNA sequencing, flow cytometry, cell sorting, optical instrument, spectrum analysis, interference, measurement, holography, laser printing, chip inspection, ...
Manufactured by:LaserStar Technologies Corporation based inOrlando, RHODE ISLAND (USA)
Now Available in 60 & 80 Watt Models. Easy to use, simple to maintain and incredibly powerful, the 992 Series iWeld Benchtop Jewelry Laser Welding System fits neatly into any work environment. iWeld is the highest peak powered laser welding machine in its class. This machine welds SILVER along with other complex ...
Manufactured by:LaserStar Technologies Corporation based inOrlando, RHODE ISLAND (USA)
LaserStar’s 7700 Series OEM Welding Laser Systems are ideal for a wide range of unique and custom integration applications to meet the various demands of metal joining, complex assembly, and repair applications for the industrial marketplace. Solution providers can benefit from a compact, portable, dual component design, making integration quick and easy for many Class 1 and Class 4 laser ...
Manufactured by:LaserStar Technologies Corporation based inOrlando, RHODE ISLAND (USA)
Easy to use, simple to maintain and incredibly powerful, the 992 Series iWeld Benchtop Jewelry Laser Welding System fits neatly into any work environment. iWeld is the highest peak powered laser welding machine in its class. This machine welds SILVER along with other complex alloys. ...
Showcase
Manufactured by:Galaxy Scientific Inc based inNashua, NEW HAMPSHIRE (USA)
The QuasIR™ 4000 FT-NIR spectrometer was designed from the ground up to offer the industry a new kind of NIR analysis solution – a solution that brings together the portability required to move NIR analysis closer to point-of-need, combined with unmatched spectroscopic performance for the fastest and most accurate results. It was engineered to ensure direct calibration transfer ...
Premium
Manufactured by:Galaxy Scientific Inc based inNashua, NEW HAMPSHIRE (USA)
The QuasIR 1000 is an FT-NIR spectrometer that brings together portability with unmatched spectroscopic performance. It features a transmission chamber that can hold various sizes of cuvettes and glass vials up to 10mm. Optional temperature control is offered; the sample compartment can be heated to 100°C or cooled to 20°C, for a wide range of applications. Liquid samples such as edible ...
Premium
Manufactured by:Galaxy Scientific Inc based inNashua, NEW HAMPSHIRE (USA)
The QuasIR 3000 FT-NIR spectrometer was designed from the ground up to offer the industry a new kind of NIR analysis solution – a solution that brings together the portability required to move NIR analysis closer to point-of-need, combined with unmatched spectroscopic performance for the fastest and most accurate results. ...
Premium
Manufactured by:Galaxy Scientific Inc based inNashua, NEW HAMPSHIRE (USA)
The QuasIR™ 2000 Portable Fiber Optic FT-NIR Spectrometer was designed from the ground up to offer the industry a new kind of NIR analysis solution – a solution that brings together the portability required to move NIR analysis closer to point-of-need, combined with unmatched spectroscopic performance for the fastest and most accurate results. It delivers a wide range of ...
Manufactured by:Laseroptek based inSeongnam-si, SOUTH KOREA
A thermal lens induced by temperature gradient should be taken into account whenever we design a solid-state laser resonator because it usually has significant aberrations and this can make it difficult to achieve uniform beam quality and stable output energy. LASEROPTEK’s proprietary thermal lens compensating technology prevent not the ...
Manufactured by:United Photonics Technology (UPT) Co., Ltd. based inMinHou, CHINA
Laser crystals are optical crystals – typically single crystals (monocrystalline optical materials) – which are used as gain media for solid-state lasers. In most cases, they are doped with either trivalent rare earth ions or transition metal ions. These ions enable the crystal to amplify light at the laser ...
Manufactured by:Molecular Technology GmbH based inBerlin, GERMANY
Cr+4:Y3Al5O12 or Cr+4:YAG - is a material that can be used as an active media for CW, pulsed or self mode-locked tunable NIR solid-state lasers with tunability range 1340 - 1580 nm as well as a media for Q-switching in lasers with operating wavelength at 950 - 1100 nm. It is particularly useful in practical applications because ...
Manufactured by:Laserline GmbH based inMülheim-Kärlich, GERMANY
The LDM Series is a compact, space-saving 19-inch diode laser designed for integration into various industrial settings. It features a multi-kilowatt power output, fiber-coupled OEM modules, and a design focused on compactness, reliability, and ease of integration. It operates at a high efficiency with ten times the socket output efficiency of lamp-pumped ...