Refine by
Solids Pumping System Equipment & Supplies
18 equipment items found
Manufactured by:Screwsucker - Pumping By APSCO based inKirkland, WASHINGTON (USA)
Clog resistant impeller and liner in wear resistant configuration. Impeller has large free passage of 4”. Fuel consumption is 50% lower than conventional dirty water pumps with the same free passage. Large pump capacity combined with a low engine power rating. The pump set primes very quickly even at large suction heights. The vacuum system can handle large quantities of air. Up to 59 cfm, ...
Manufactured by:Screwsucker - Pumping By APSCO based inKirkland, WASHINGTON (USA)
Clog resistant Impeller and liner in wear resistant configuration. Impeller has large free passage of 4'. Fuel consumption is 50% lower than conventional dirty water pumps with the same free passage. Large pump capacity combined with a low engine power rating. The pump set primes very quickly even at large suction heights. The vacuum system can handle large quantities of air. Up to 59 cfm, ...
Manufactured by:Power Technology, Inc based inAlexander, ARKANSAS (USA)
The Symphony series of lasers are high power diode pumped solid state laser systems (DPSS) that emit single frequency green laser light at 532nm. These systems are based on Power Technology’s patented iMAT laser technology providing diffraction limited beam quality, intrinsic single longitudinal mode output and industry ...
Manufactured by:Screwsucker - Pumping By APSCO based inKirkland, WASHINGTON (USA)
Discharge Flange: 6” 125 LB. ANSI. Capacity: (max @ 1800 RPM) 1900 GPM. Head: (max @ 1800 RPM) 136 ...
Manufactured by:Screwsucker - Pumping By APSCO based inKirkland, WASHINGTON (USA)
Discharge Flange: 6” 125 LBS. ANSI. Capacity: (max) 2000 GPM. Head: (max) 210 ...
Manufactured by:Lowara - a Xylem brand based inWashington, DISTRICT OF COLUMBIA (USA)
These pumps combine the advantages of an open impeller with those of the AISI 316 stainless steel construction, which is particularly suited for handling moderately aggressive liquids with suspended ...
Manufactured by:Lowara - a Xylem brand based inWashington, DISTRICT OF COLUMBIA (USA)
The Lowara SHO is a centrifugal pump with an open and recessed impeller design allowing free passage for solids. Maximum free passage is 40 mm. The main application is different types of washing machines and washing equipment where the water can contain solids and be slightly aggressive. SHO is made of fabricated stainless steel AISI 316. To enhance the wear resistance and prolong the life time, ...
Manufactured by:Moyno, Inc. based inSpringfield, OHIO (USA)
Moyno has created a food products processor that combines solids reduction and transfer pumping into one efficient unit. The patent pending Chopper Hopper is a unique and aggressive solids reduction pumping system that reduces whole produce - papayas, pineapples, pumpkins or any other fruits or vegetables - into ...
Manufactured by:Nova Rotors srl based inSossano (VI), ITALY
Shredder for industrial and ecological sector Nova Rotors Grinders – TG Series. A uniform and proper treatment of solids is essential, particularly in wastewater treatment applications and sludge management systems. It is also crucial in other industries to prevent harmful solids from entering the pumping ...
Manufactured by:JDI, Inc. / Washbay Solutions based inWilmington, NORTH CAROLINA (USA)
Robustly designed for range of industrial applications from oilfield pipe washing to large equipment washing to large hand tools, our Solids Settling Systems with Geo Bags are designed to help control costs associated with solids removal from wash bay sumps. They can be constructed in a range of sizes, configurations and materials, depending on ...
Manufactured by:Putzmeister Solid Pumps GmbH based inAichtal, GERMANY
By using the hydraulic drive the conveying quantities and the pressure for different applications can be adjusted optimally and very flexible. Conveying quantity and pressure are process-controlled also from the distance.The hydraulic aggregate CI works very quiet due to a vibration-cushioned frame. The oil tank is specially coated inside and therefore corrosion-resistant. For electro and diesel ...
Manufactured by:Mud Technology International, Inc. (MTI) based inAthens, TEXAS (USA)
7.5 HP Electric Trash Pump, 500+ gpm, pump head is completely submersible, flooded suction (does not have to be primed), sealed heavy duty bearings for maximum life, 480 volt / 3 phase power for maximum efficiency, 100' weatherproof cord, easily adaptable to most brands of mud systems. ...
Manufactured by:Mud Technology International, Inc. (MTI) based inAthens, TEXAS (USA)
10 HP Electric Trash Pump, 625+ gpm, pump head is completely submersible, flooded suction (does not have to be primed), sealed heavy duty bearings for maximum life, 480 volt / 3 phase power for maximum efficiency, 100' weatherproof cord, easily adaptable to most brands of mud systems. ...
Manufactured by:Mud Technology International, Inc. (MTI) based inAthens, TEXAS (USA)
15 HP Electric Trash Pump, 700+ gpm, pump head is completely submersible, flooded suction (does not have to be primed), sealed heavy duty bearings for maximum life, 480 volt / 3 phase power for maximum efficiency, 100' weatherproof cord, easily adaptable to most brands of mud systems. ...
Manufactured by:Mud Technology International, Inc. (MTI) based inAthens, TEXAS (USA)
20 HP Electric Trash Pump, 800+ gpm, pump head is completely submersible, flooded suction (does not have to be primed), sealed heavy duty bearings for maximum life, 480 volt / 3 phase power for maximum efficiency, 100' weatherproof cord, easily adaptable to most brands of mud systems. ...
Manufactured by:EDDY Pump based inEl Cajon, CALIFORNIA (USA)
Autonomous Floating Dredge, AD10k Unmanned Automated Floating Dredger. Powered by a 4, 6, 8, 10 or 12-Inch EDDY ...
Manufactured by:WSI International based inAnnapolis, MARYLAND (USA)
The R-75 DAF was originally designed for use in the mining and the oil & gas industry. Over the past couple of years, it's become apparent that it's robust heavy-duty frame and integrated components are perfect for emergency industrial pretreatment scenarios. We've deployed the R-75 to several customers that were out compliance on their discharge permits. The DAF is capable of running ...
Manufactured by:Custom Dredge Works Inc. based inTopeka, KANSAS (USA)
Ladder Pump Dredger: A ladder pump dredge has the pump located as the name states on the ladder. Locating the pump on the ladder allows for the pump to become submerged when the ladder is lowered. When the pump is submerged it becomes more efficient and allows for a higher percentage of ...