Refine by
Applications
- Power Plant & Power Station Emissions Monitoring
- Chemical Industry Emissions Analysis
- Refineries & Refinery Emissions Monitoring & Analysis
- Iron & Steel Industry Emissions Monitoring & Analysis
- Incineration Industry Emissions Monitoring & Analysis
- Paper & Pulp Industry Emissions Monitoring
- Cement & Lime Industry Emissions Analysis & Monitoring
- Marine And Offshore Emissions Monitoring & Analysis
- Biomass Plant Emissions Monitoring (CEMS)
- Nitric Acid Production Emissions Analysis
- Chromatography gas analysis for air test
Stack Analysis Equipment & Supplies
38 equipment items found
Premium
Manufactured by:ENVEA based inPoissy, FRANCE
CAI PAS Sense analyzers use photoacoustic infrared technology to measure many of the most commonly measured IR-absorbing gases. Gas selectivity is achieved through the use of optical filters that provide both a means of detecting the gas of interest and compensating for interfering gases and water. Both bench-top and rack-mounted PAS configurations are ...
Manufactured by:Procal - Parker Hannifin Corp based inPeterborough, UNITED KINGDOM
Procal 2000 is an infra-red (IR), duct or stack-mounted analyser designed to provide in-stack analysis of up to six, gas-phase emission ...
Manufactured by:Apex Instruments, Inc. based inFuquay-Varina, NORTH CAROLINA (USA)
Medium porosity, 34 x 100 mm, round bottom, fits SFA-300, use additional O-ring (O-123V) Ceramic thimbles do not meet the EPA regulatory standard of 99.95 retention for Methods 5 and ...
by:CMC Solutions, LLC based inFarmington Hills, MICHIGAN (USA)
The SmartCEMS® Mobile CEMS is a complete mobile monitoring system on wheels and an integral part of a predictive emission monitoring system (PEMS) that provides continuous stack gas analysis for pollutants and diluents under U.S. EPA 40 CFR Part 60 and/or U.S. EPA 40 CFR Part 75 regulations. The Mobile CEMS will meet the requirements for use in reference ...
by:CMC Solutions, LLC based inFarmington Hills, MICHIGAN (USA)
The Shelter CEMS is without a zone rating such as ATEX II. The Shelter CEMS can be equipped to provide continuous stack gas analysis for pollutants and diluents under U.S. EPA 40 CFR Part 60 and/or U.S. EPA 40 CFR Part 75 regulations. The Shelter CEMS is equipped with analyzers for stack gas flow, concentration of NOx, SO2, CO, CO2, and O2. ...
by:CMC Solutions, LLC based inFarmington Hills, MICHIGAN (USA)
The Shelter CEMS is typically supplied either with or without a zone rating such as ATEX II. The Shelter CEMS can be equipped to provide continuous stack gas analysis for pollutants and diluents under U.S. EPA 40 CFR Part 60 and/or U.S. EPA 40 CFR Part 75 regulations. The Shelter CEMS is equipped with analyzers for stack gas flow, concentration ...
Manufactured by:Calcium Products, Inc. based inAmes, IOWA (USA)
Consistent and proper soil pH maximizes a plant’s utilization of nutrients, promoting good plant health. It’s important to know how much of your aglime is actually capable of changing soil pH, and how much of it is either too coarse to have any sort of efficient pH change, or too fine and therefore susceptible to drift loss. We want you to be aware of the variation in your ...
by:CMC Solutions, LLC based inFarmington Hills, MICHIGAN (USA)
The SmartCEMS® Remote Terminal Unit is a component of a predictive emission monitoring system (PEMS) that provides continuous stack gas analysis for pollutants and diluents under U.S. EPA 40 CFR Part 60 and/or U.S. EPA 40 CFR Part 75 regulations. The PEMS Analyzer will meet the requirements of Subpart E of Part 75 and/or and the standard under Part 60, PS-16. ...
Manufactured by:Apex Instruments, Inc. based inFuquay-Varina, NORTH CAROLINA (USA)
The GFA-2590K in-stack thimble holder kit includes a selection of the seven most commonly used nozzle inserts, ranging from 1/8-inch to 1/2-inch, and one housing. The entire kit is conveniently packaged in a foam-lined carrying case for protection. The thimble holder connects directly to the end of the probe with a 5/8-inch tube union. One metal taper clip is included in the ...
Manufactured by:Woori Environmental Technology Co, Ltd. based inSuwon-si, SOUTH KOREA
Most frequently used for demanding applications, the ULTRAMAT 6 must meet high standards with regard to reliability and measuring quality. This is guaranteed by modern electronics, ease of operation and a physical element that is adapted to the measuring ...
Manufactured by:Apex Instruments, Inc. based inFuquay-Varina, NORTH CAROLINA (USA)
Apex Instruments stocks a variety of fiber thimbles for in-stack particulate sampling. The thimbles are seamless, high purity filters, and available in two different fiber types: borosilicate glass and quartz. Borosilicate glass fiber thimbles are acid-washed to reduce the trace metal content to an absolute minimum. The quartz fiber thimbles are strengthened with alumina and are pre-fired at ...
Manufactured by:Apex Instruments, Inc. based inFuquay-Varina, NORTH CAROLINA (USA)
Apex Instruments stocks a variety of fiber thimbles for in-stack particulate sampling. The thimbles are seamless, high purity filters, and available in two different fiber types: borosilicate glass and quartz. Borosilicate glass fiber thimbles are acid-washed to reduce the trace metal content to an absolute minimum. The quartz fiber thimbles are strengthened with alumina and are pre-fired at ...
Manufactured by:Apex Instruments, Inc. based inFuquay-Varina, NORTH CAROLINA (USA)
Apex Instruments stocks a variety of fiber thimbles for in-stack particulate sampling. The thimbles are seamless, high purity filters, and available in two different fiber types: borosilicate glass and quartz. Borosilicate glass fiber thimbles are acid-washed to reduce the trace metal content to an absolute minimum. The quartz fiber thimbles are strengthened with alumina and are pre-fired at ...
Manufactured by:Imspex Diagnostics Ltd. based inAbercynon, UNITED KINGDOM
The unique integration of an IMS detector into an existing GC such as Agilent’s 490 Micro GC opens up new horizons for convenience, accuracy and innovation for detection of sub-ppm VOCs in gases. Joint projects can be undertaken to take advantage of the strongpoints of both partners’ instruments when legislative and customer requirements require. A case in point was combination of a ...
Manufactured by:Woori Environmental Technology Co, Ltd. based inSuwon-si, SOUTH KOREA
With its multi-component design with NDIR technology for the measurement of up to three IR active constituents and optional electrochemical cells for O2 and H2S measurement, the ULTRAMAT 23 is extremely innovative and space saving. ...
Manufactured by:Kewell Technology Co.,Ltd. based inHefei City, CHINA
Fuel Cell Stack Test System (FCTS-S) is engineered to provide a stable test platform for fuel cell stack. Ideal for stack performance evaluation and the R&D process of fuel cell ...
Manufactured by:CSE W Arthur Fisher based inAuckland , NEW ZEALAND
TX-100 is HORIBA’s in-situ laser-based HCl analyzer with a probe type optical system. The TX-100 is suitable for monitoring HCl concentrations in incineration plant flue gas streams and for the control of HCl removal processes. Probe type optical system, Both laser and receiver are installed at the same side of the stack, Just one flange installation is sufficient for the setup, Easy ...
Manufactured by:Granutools based inAwans, BELGIUM
The GranuDrum powder tester by Granutools is a specialized instrument designed to analyze the cohesion and flow properties of granular materials. Utilizing a rotating drum principle, it features a transparent drum cylinder that rotates with a powder sample, capturing images at various speeds through an integrated camera. Software processes these images to derive measurements like the cohesive ...
Manufactured by:Perma Pure LLC - a Halma Company based inLakewood, NEW JERSEY (USA)
The GASS-2040 conditions high-flow, high-moisture samples, eliminating acid mists or ammonia if present. It processes the toughest samples, with flows of up to 25 liters per minute and moisture contents in excess of 50%. The GASS-2040 can be mounted anywhere, including on the stack flange with an integral stack probe, which eliminates heated sample ...
Manufactured by:Comptus Inc. based inCampton, NEW HAMPSHIRE (USA)
C48 Eight Set Point Wind ...