Show results for
Refine by
Applications
- Chemiluminescense based analyzer for industrial sector
- Industrial monitoring solutions for the gas analysers areas
- Air Quality Monitoring Equipment for Sample Handling Industry
- Process analyzers & instruments for continuous emissions monitoring
- Particle Measurement Instruments for Non-Exhaust Vehicle Emissions
- Stack emissions monitoring
- Air pollution, emission and process monitoring systems for agriculture
- Asphalt production - monitoring solutions for process optimization & energy saving
- Stack gas emission monitoring for the energy industry
- Industrial monitoring solutions for the flue gas desulphurisation areas
- Industrial monitoring solutions for the de-NOx plants areas
- On-Line gas, particulate analyzers, flow monitors, data acquisition for combustion
- On-Line gas,particulate analyzers, flow monitors, data acquisition for cement plants
- On-Line gas,particulate analyzers, flow monitors, data acquisition for glass works
- On-Line gas,particulate analyzers, flow monitors, data acquisition for process control
- Process analyzers & instruments for NOx emissions
Stack Emissions Equipment Supplied In Germany
52 equipment items found
Premium
Manufactured by:MRU Messgerate fur Rauchgase und Umweltschutz GmbH based inNeckarsulm-Obereisesheim, GERMANY
Portable stack gas emission analyser for long time measurements of industrial ...
Manufactured by:Dekati Ltd. based inKangasala, FINLAND
To remove humidity from the sample. 120 cm, 120 + 60 ...
Premium
Manufactured by:ENVEA based inPoissy, FRANCE
The PCME STACKFLOW 400 is an advanced flue gas flow measurement system for continuous monitoring of releases from industrial sources complying with European monitoring standard EN 16911-2:2013 and ...
Premium
Manufactured by:ENVEA based inPoissy, FRANCE
The STACKFLOW 200 uses the well established Averaging Pitot sensor technology to provide continuous emission monitoring of Flow, Temperature and Pressure. Utilised as a standalone sensor or in combination with controllers for the monitoring of particulates, gases and flue gas as part of a larger monitoring ...
Premium
Manufactured by:J.U.M. Engineering GmbH based inKarlsfeld, GERMANY
The J.U.M 3-800 Portable Heated Total Hydrocarbon Analyzer is a heavy duty FID analyzer to continuously measure the total concentration of hydrocarbons within a gaseous sample. This can be ambient air, exhaust gases from a combustion process e.g. stack emissions, from any type of an industrial vent, from an internal combustion engine, or from any other ...
Premium
Manufactured by:ENVEA based inPoissy, FRANCE
Offers excellent performance for multigas measurements in dry sampling, including HCl, HF, NO, NO2, N2O, SO2, CO, CH4, TOC, CO2 and O2 in process applications or for stack emission compliance. Multi-Gas NDIR-GFC analyzer (Non-Dispersive Infrared Gas Filter Correlation) measuring up to ten gases simultaneously, including Nitrogen Oxide (NO), Nitrogen Dioxide ...
Premium
Manufactured by:J.U.M. Engineering GmbH based inKarlsfeld, GERMANY
All controls which allow to calibrate the FTIR or FID individually are built in. Sources can be ambient air, exhaust gases from a combustion process, stack emissions, from any type of an industrial vent, from an internal combustion engine, or from any other emission containing hydrocarbons. The Model 3-700 complements an FTIR analyzer with full ...
Premium
Manufactured by:J.U.M. Engineering GmbH based inKarlsfeld, GERMANY
The Model 109A is a Heated Non Methane Hydrocarbon FID Analyzer thousandfold used throughout industrial environmental and stack emissions applications as well in ambient air and indoor air concentration measurements. Manufactured since 1989 this analyzer this heated dual FID analyzer continuously and simultaneously measures the Methane, Total Hydrocarbon and Non ...
Premium
Manufactured by:J.U.M. Engineering GmbH based inKarlsfeld, GERMANY
It is being manufactured since 1974 and is thevery first heated THC analyzer ever built using a permanent back purge sample filter. It is still the mostly liked heated FID throughout the stack testing community and best known for its legendary ruggedness, forgiveness and long standing accuracy and sensitivity. The VE7 belongs to the very first total hydrocarbon analyzers being ...
Manufactured by:Codel - a Forbes Marshall company based inBakewell, UNITED KINGDOM
The GCEM4000 is a multi-channel flue gas analyser that uses Non-Dispersive Infrared Absorption (NDIR) technology. It provides high accuracy, low maintenance measurement of all the key combustion process emissions to atmosphere. It is capable of operating in very high dust loading conditions, up to several gm/m3 of dust. Its performance can be verified automatically or manually on demand by the ...
Manufactured by:Codel - a Forbes Marshall company based inBakewell, UNITED KINGDOM
The GCEM40 series is the latest generation of CODEL’s world renowned in-situ monitors. Our development, knowledge and practical experience have been utilised to produce this advanced technology gas analyser which gives complete flexibility of use on process or emissions applications whilst delivering superb accuracy and repeatability at a very competitive price. Designed for use primarily ...
Manufactured by:Codel - a Forbes Marshall company based inBakewell, UNITED KINGDOM
The GCEM40E hot extractive multi-channel gas analyser is CODEL’s industry-proven continuous emissions monitor for difficult applications. Designed exclusively for use on a wide range of applications where the flue gas temperature is abnormally high, low or saturated. Three decades of development, knowledge and practical experience have been utilised to produce this advanced technology gas ...
Premium
Manufactured by:J.U.M. Engineering GmbH based inKarlsfeld, GERMANY
Both pump modules can also be used as used as individual dual or high flow sample pump. In the all stainless version it withstands normal corrosive gasses as they are present in standard stack gas emission. The pump drive mechanism has been designed for a smooth and low vibration, silent and long lasting continuous mode of ...
Premium
Manufactured by:J.U.M. Engineering GmbH based inKarlsfeld, GERMANY
The 2812D is a very compact sample pump. It is made of 316 stainless steel to withstand the corrosive gasses as they can become present in a typical stack gas emission test. The drive mechanism is designed for a very smooth, low vibration, silent and continuous operation. The pump drive mechanism and motor have been designed for continuous, smooth and low ...
Premium
Manufactured by:J.U.M. Engineering GmbH based inKarlsfeld, GERMANY
The J.U.M Heated Total Hydrocarbon Analyzer Model 3-500 FID is our lowest cost alternative to continuously measure the total concentration of hydrocarbons within a gaseous sample. This can be ambient air, exhaust gases from a combustion process e.g. stack emissions, from any type of an industrial vent, from an internal combustion engine, or from any other ...
Manufactured by:HORIBA Europe GmbH based inLeichlingen, GERMANY
HORIBA Europe’s NOx Converter Checker CC-100E has been developed to test the e'ciency of NOx to NO converters, which are used in NOx gas analyzers for stack emission measurements or process gas ...
Premium
Manufactured by:J.U.M. Engineering GmbH based inKarlsfeld, GERMANY
The J.U.M Heated Total Hydrocarbon Analyzer Model 3-600 FID is another low cost alternative to continuously measure the total concentration of hydrocarbons within a gaseous sample. This can be ambient air, exhaust gases from a combustion process e.g. stack emissions, from any type of an industrial vent, from an internal combustion engine, or from any other ...
Manufactured by:AMETEK Process Instruments based inPittsburgh, PENNSYLVANIA (USA)
The 920 is a multi-gas analyzer specifically configured to monitor the stack emissions of multiple pollutants on a concentration basis. Combining hot-wet analysis with reliable ultraviolet-based measurements, the 920 delivers multi-range sulfur dioxide measurements, alongside simultaneous, independent measurements for nitric oxide and nitric ...
Manufactured by:Testa GmbH based inMunich, GERMANY
The 19” Flame-Ionisation-Detector (FID) 1230NMHC measures with its built-in NMHC-Cutter the methane concentration (methane only) and after switching to THC in a wide range of applications like stack gas emissions monitoring, ambient air monitoring, thermal reactor and combustor emissions monitoring and also vehicle exhaust gases. The ...
Premium
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
The Sonimix 2130 NOx converter tester has been designed to generate a stable NO2 concentration with a small reaction time. It is based on the sonic nozzles technology (ISO 6145-6 technology) and high stability pressure regulators. The NOx converter tester is often used together with a multi-steps gas divider also based on sonic nozzles and high precision pressure regulators. In order to validate ...