Refine by
Applications
- On-Line gas, particulate analyzers, flow monitors, data acquisition for combustion
- On-Line gas,particulate analyzers, flow monitors, data acquisition for cement plants
- On-Line gas,particulate analyzers, flow monitors, data acquisition for glass works
- On-Line gas,particulate analyzers, flow monitors, data acquisition for process control
Stack Sampling System Equipment & Supplies
22 equipment items found
Premium
Manufactured by:ENVEA based inPoissy, FRANCE
The dry extractive SEC system dries the gas sample at the sampling point, eliminating the necessity of an expensive heated sampling line. It uses an exclusive high performance permeation technique, designed to meet almost all gas sample conditions. Ideal for highly soluble and corrosive gases. Optional built-in temperature & velocity sensors or STACKFLOW 200 flow meter on the same ...
Premium
Manufactured by:ENVEA based inPoissy, FRANCE
Gas Sampling system for use in combination with low concentration analyzers (Ambient Air ...
Manufactured by:Genius5-Instruments GmbH based inKottingbrunn, AUSTRIA
Genius5 AiO system developed to support EU Commission implementing decision 2017/1442 and plant operators. Commission implementing decision (EU) 2017/1442 defines very low limit valus for the emission of mercury. Incinerators >= 300 MW have to measure contineously, incinerators <= 300 MW have to measure 4 times a year using EN 13211. The legal limit values for mercury are reduced to 1 - 2 ...
Manufactured by:HI-Q Environmental Products Company, Inc. based inSan Diego, CALIFORNIA (USA)
HI-Q is ready to help with your stack sampling requirements: State and Federal nuclear regulatory agencies require a stack discharge sampling program as part of the licensing process. Radionuclides discharged to the air in the form of particulate and volatile compounds must be assayed. Therefore, nuclear facilities are required to follow standard protocol for sampling their effluent. Possible ...
Manufactured by:Polltech Instruments Pvt. Ltd. based inMumbai, INDIA
The Manual Stack Monitoring Kit is used to take accurate representative samples of particulate matter and various gaseous pollutants such as SO2, NOX etc. emitted from industrial stacks. It facilitates sampling of the stack emissions in accordance with the methodologies developed by US EPA and as specified by CPCB. Classical stack monitoring kit with advanced digital features. Based on US EPA ...
Manufactured by:HI-Q Environmental Products Company, Inc. based inSan Diego, CALIFORNIA (USA)
HI-Q Environmental Products Company's product line includes complete stack sampling systems, consisting of a specified type of probe, in-line filter holder, the transport line, sampling pump and flow controller. We recommend, design, and supply complete systems. HI-Q Environmental Products Company is able to make ...
Manufactured by:RADēCO LLC based inPlainfield, CONNECTICUT (USA)
It can be used with filters and cartridges in the collection of airborne contaminates, or as a regulated, positive displacement vacuum supply for continuous air monitors and stack sampling ...
Manufactured by:TCR-Tecora based inCogliate (MB), ITALY
The Isoterm thermoregulation devices are available in three different configurations that provide 1, 2 or 4 outputs. Through the electronic PID regulators it is possible to measure and control the heated temperature in a precise and effective way. The connections are unified to allow the widest versatility of use. In the 2 and 3 output models it is possible to insert alarm thresholds that ...
Manufactured by:Metlab Miljö AB based inEnköping, SWEDEN
The EVA Light Gas Probe is a heated glass probe with a filter holder for a 47 mm plane filter. The probe construction comply with the requirements of most international standards methods for flue gas samplings, i.e. acid gases (HCl, HF, SO2, SO3), ammonia, mercury and other metals and also for organic micro-pollutants (such as dioxins, PAH ...
Manufactured by:National Environmental Systems (NES) based inAttleboro, MASSACHUSETTS (USA)
National Environmental Systems has built upon our experience with integrated systems to work with clients requiring assistance with designing and building Air Monitoring Stations. Portable systems are available for monitoring air at construction sites. Other systems may be housed in mobile trailers or fixed-point enclosures. The requirements for air monitoring may include specifications for ...
Manufactured by:Metlab Miljö AB based inEnköping, SWEDEN
Suction pyrometers are used for accurate temperature measurements in high temperature flue gases such as fire rooms. The principle is both to reduce the heat transfer by radiation and to increase the heat transfer by convection to the temperature sensor. The suction tube must have a length that allows for traversements in the measurement plane. The flow of cold water must be high enough to ...
Manufactured by:Metlab Miljö AB based inEnköping, SWEDEN
The STL Gas Sampler is used for manual wet chemical determination of gaseous pollutants such as HCl, HF, SO2, SO3, NH3, Hg and other metals according to European standard methods. The complete sampling system consists of 1) a heated gas sampling probe (EVA Light Gas Probe), 2) one or several parallel absorption bottle sampling trains and 3) one or several control units CU-1-10 (or ...
Manufactured by:Metlab Miljö AB based inEnköping, SWEDEN
METLAB offer several alternative equipments for sampling of dioxins (PCDD/PCDF) and other organic micro-pollutants – all fulfilling the requirements in the European Standard EN-1948. The most frequent delivered equipment is the EVA Light Dioxin sampler. Also available are the older Nordic Dioxin Sampler and EVA Dioxin Sampler and also METLAB’s Cooled Probe Dioxin ...
Manufactured by:TCR-Tecora based inCogliate (MB), ITALY
The dividable monotube probes can be used in that application where isn’t possible or not convenient to use an integrated probe. Are developed in conformity with the “Determination of dust concentration at low concentrations” according to the EN 13284-1. The Method in the In-stack filter sampling line describe a particular entry nozzle with combined filter holder, that is ...
Manufactured by:Flo-Corp based inMedina, OHIO (USA)
The FLO-CORP CalFlo CFAM Thermal Mass Air Flow Meter is well suited for small pipes up to 3/4” in diameter. The ideal solution for gas applications, from vent gas to nitrogen blanket flow. ...
Manufactured by:Metlab Miljö AB based inEnköping, SWEDEN
The STL Gas Sampler is used for manual wet chemical determination of gaseous pollutants such as HCl, HF, SO2, SO3, NH3, Hg and other metals according to European standard methods. The complete sampling system consists of 1) a heated gas sampling probe (EVA Light Gas Probe), 2) one or several parallel absorption bottle sampling trains and 3) one or several control units CU-1-10 (or ...
by:CMC Solutions, LLC based inFarmington Hills, MICHIGAN (USA)
The SmartCEMS® Sample Line is a component of a predictive emission monitoring system (PEMS) that provides for continuous stack gas sampling for pollutants and diluents under U.S. EPA 40 CFR Part 60 and/or U.S. EPA 40 CFR Part 75 regulations. The Sample Line will meet the requirements for ...
Manufactured by:VF, a.s. based inCerná Hora, CZECH REPUBLIC
The VOPV-10 high-volume air sampler is intended for air sampling of very high volumes allowing for follow-up contamination measurement. It is typically utilised for the sampling and evaluation of radioactive aerosols, particulates, etc. in the contaminated ...
Manufactured by:Nutech Instruments Inc. based inPlano, TEXAS (USA)
Tedlar bags are recommended in many US EPA methods including TCLP and methods TO-3 (VOCs), TO-12 (NMOC), TO-14A (VOCs), TO-15 (VOCs), ASTM D-5504 (reduced sulfur compounds) and a variety of atmospheric gas ...
Distributed by:a1-cbiss based inBirkenhead, UNITED KINGDOM
Based on the MIR-9000, this in-situ multi-gas CEM system is a compact extractive monitoring system, providing fast response, close coupled measurements. CEM Systems are required to satisfy environmental led legislation within industrial ...