Refine by
Steam Flare Equipment & Supplies
31 equipment items found
Manufactured by:Callidus Technologies - part of UOP, a Honeywell Company based inTulsa, OKLAHOMA (USA)
Upper steam flare tips incorporate a high-stability pilot and a flame retention system. With a high efficiency, low noise steam injection ring, the flare tip provides smokeless burning with lower noise than traditional steam injection systems. The upper steam injection is mechanically superior in ...
Distributed by:GBA Flare Systems based inBurnham, UNITED KINGDOM
The GBA GCT series flare tip is a robust and flexible design that is routinely used on refinery and chemical plant duty. It's principal means of steam injection is via the upper manifold. This uses a number of injector nozzles located on a manifold positioned around the tip circumference to inject steam at high pressure directly into the flame. ...
Manufactured by:Callidus Technologies - part of UOP, a Honeywell Company based inTulsa, OKLAHOMA (USA)
The internal steam flare and the internal steam super sonic flare represent significant improvements over traditional internal steam ...
by:EnviroPro, Inc. based inHouston, TEXAS (USA)
Internal steam flare tips use inner steam to inspirate more air into the combustion zone. The steam manifold and nozzles are located in a lower position on the flare tip. The steam/air mixture is directed up through the inside of the flare tip to exit and mix with waste gas for ...
Manufactured by:Earthcon Energy India Pvt Ltd based inPune, INDIA
Our steam-assisted flares are used in applications where heavier waste gases need to be disposed and high-pressure steam is readily available on site. Our proprietary flare designs offer exceptional smokeless performance, lower radiation levels, and less noise than typical air-assisted ...
Manufactured by:Europem N.V based inLier, BELGIUM
Since the 1980’s, key staff of Europem have been responsible for the design, fabrication, installation, commissioning and maintenance of numerous flare systems including some of the most stringent and demanding applications.Europem’s extensive experience in flare design has resulted in a comprehensive range of elevated and ground flare systems and ancillaries to cover the needs of all ...
Manufactured by:Tornado Combustion Technologies based inCalgary, ALBERTA (CANADA)
Tornado's steam-assisted flare stacks are designed to combust heavy hydrocarbons with no smoke emissions when there is a source of high-pressure steam available on ...
Manufactured by:Airoil Flaregas Pvt. Ltd. based inDist. Mehsana, INDIA
The Steam Assisted Smokeless flare tips are the most efficient flare tips utilizing external steam nozzles in addition to central steam nozzles and are suitable for sites where a general low noise flare tip is required. The Steam-Assisted Smokeless Flare tips are ...
Manufactured by:MRW Technologies, Inc. based inGlenpool, OKLAHOMA (USA)
Some facilities have steam readily available and can use it to achieve smokeless combustion for their flaring needs. MRW’s time-tested and efficient steam-assisted flare tip technologies are operating successfully at petroleum refineries, chemical & petrochemical facilities, and agricultural processing plants worldwide. ...
by:EnviroPro, Inc. based inHouston, TEXAS (USA)
Sometimes referred to as steam assisted pipe flares, upper steam flares have a steam manifold near the top of the flare tip. The manifold distributes steam to nozzles surrounding the outside diameter of the flare tip, just above the flare tip ...
Manufactured by:Callidus Technologies - part of UOP, a Honeywell Company based inTulsa, OKLAHOMA (USA)
UOP Callidus Totally Enclosed Ground Flare (TEGF) system was originally designed to eliminate light and noise from flaring waste gases. This flare has been used extensively in the combustion of waste gases from chemical plants, hydrocarbon loading terminals, FPSO floating production vessels, refineries, and any other application where low emission, efficient combustion is required every day. ...
Manufactured by:Callidus Technologies - part of UOP, a Honeywell Company based inTulsa, OKLAHOMA (USA)
The air assisted flare represents an effective alternative to traditional, steam-assisted smokeless flares. Significant advantages of the air-assisted design is a dramatic reduction in maintenance of the flare tip and lower operating costs.The continual flow of forced draft air cools the tip and prevents flame pull down in high ...
Manufactured by:Smitsvonk Holland B.V. - a member of the Durag Group based inZoetermeer, NETHERLANDS
Ignition of waste gas from pipe flares, air and steam assisted flares and ground flares For most flare systems the pilot burner can not be accessed for service. Maintenance or replacement is not possible while the flare is in operation.To safeguard operation, Smitsvonk's pilots provide reliable ...
Manufactured by:Williamson based inConcord, MASSACHUSETTS (USA)
The Williamson Smokeless Flare Monitor (FM) utilizes proven dual-wavelength technology to monitor the ratio of carbon to available oxygen deep within the hot flare flame. This ratio value correlates to combustion efficiency and is used to adjust the flow of air or steam to smokeless flares, thus assuring smoke-free operation and ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
To dispose of heavy waste gases, which have a greater tendency to smoke, in a smokeless manner, we provide three different design options, depending on customer requirements. Air Assisted Flares, which utilize forced air from blower(s) to provide assist air for combustion and promotes additional air entrain from the ambient due to the relatively high exit speed of the streams. ...
Manufactured by:Zeeco, Inc. based inBroken Arrow, OKLAHOMA (USA)
The world’s most in-demand flare for the world’s most punishing conditions. Zeeco’s UF series utility flare is ideal for onshore or offshore applications that do not require smokeless performance or where smokeless flaring can be managed without air or steam assist. Our UF flare series is one of ...
Manufactured by:Callidus Technologies - part of UOP, a Honeywell Company based inTulsa, OKLAHOMA (USA)
The Callidus Hemisflare tip design is a breakthrough in modern flare technology. Through the use of computational fluid dynamics (CFD) modeling and physical testing, a new method of flare gas combustion has been created. We’ve incorporated a Coanda design with enhanced ridges that has increased the flare gas and air mixing while enabling longer tip ...
Manufactured by:Sammi Machinary Co., Ltd based inMiryang-si Kyeongnam., SOUTH KOREA
Swing type line blind is one of the most popular line blinds that an operator can use to quickly and efficiently isolate a pipeline safely. SAMMI’s unique design provides non-stretching operation that can prevent pipe joint stress caused by stretching ...
Manufactured by:Combustion Research Associates based inNoida, INDIA
Assisted flares are designed to dispose of heavier hydrocarbon gases that have a greater propensity to smoke. Air Assisted flares use blowers to introduce combustion air into the gas stream as it exits the flare tip. A low-pressure blower blows combustion air into an additional riser forcing air into the flare tip, where this air ...
Manufactured by:Fives I.T.A.S. s.p.a. based inMonza, ITALY
Demountable flares are used when locating several flares in a limited available plot plan is critical, while limiting plant shut-down costs for maintenance. From design, engineering, fabrication, supervision and training, Fives offers up to 200 meters demountable flares systems. ...