Refine by
Strip Diffuser Equipment & Supplies
12 equipment items found
Manufactured by:SCM Tecnologie based inSan Giorgio (MN), ITALY
The strip diffuser is designed to work with a high flow rate of blown air, in conditions where traditional disc and tubular diffusers cannot operate normally. By using strip diffusers, it is therefore possible to cover the same surface with a smaller number of units. Another strongpoint of the ...
Manufactured by:Jäger Umwelt-Technik GmbH based inHannover, GERMANY
Every diffuser, no matter how good, reaches the end-of-life at some point and must be replaced. It must be replaced at the latest, when the membranes fail mechanically. Up to now, regarding plate and strip diffuser, the entire diffuser was always removed from the basin. Replacing the membranes was not possible with plate and ...
Manufactured by:Aquaconsult Anlagenbau GmbH based inTraiskirchen, AUSTRIA
Large diffuser surface - compactly installed. AEROSTRIP Modules combine the high performance of the strip diffuser with the quick and easy assembly of the plate diffuser. The AEROSTRIP modules are available in lengths of 2 - 4 meters and a width of 1 meter. Compared to other systems (plates, tubes, strips), ...
Manufactured by:FLI Water Limited based inKempston, UNITED KINGDOM
Strip membrane diffusers The high-tensile micro-perforated polyurethane membrane guarantees maximum lifetime. The diffuser has a new air connection that needs no further sealants. The integrated sealing by O-ring allows the air tube to plug-in and tighten easily. The simple and reliable fixing avoids complex and expensive installation work. The ...
Manufactured by:Aqua Equip Technologies LLC (AET) based inTarpon Spring, TEXAS (USA)
The Jaeger-aeration retrievable strip diffuser rack systems provide a multi-level system redundancy and a fast and easy way to maintain diffusers without basin dewatering. The diffuser racks can be designed for any tank geometry (rectangular, round, toroidal) and mounted to basin walls as well as bridges or catwalks. Better ...
Manufactured by:Aqua Equip Technologies LLC (AET) based inTarpon Spring, TEXAS (USA)
Disc, tube and strip diffusers for fixed grid aeration systems available in EPDM, silicone and ...
Manufactured by:Hydroflux Industrial based inSydney, AUSTRALIA
The AEROSTRIP® Fine Bubble Membrane Diffuser is a strip diffuser, for use in continuous and intermittent biological processes. AEROSTRIP Diffusers by AquaConsult of Austria have been in operation since the early 1990’s and are providing significant benefits to numerous wastewater treatment plants with over 2000 ...
Manufactured by:Hydroflux Pty Ltd based inSydney, AUSTRALIA
The AEROSTRIP® Fine Bubble Membrane Diffuser is a strip diffuser, for use in continuous and intermittent biological processes. AEROSTRIP® Diffusers by AquaConsult of Austria have been in operation since the early 1990’s and are providing significant benefits to numerous wastewater treatment plants with over 2000 ...
Manufactured by:Aquatec-Maxcon Pty Ltd based inWulkuraka, AUSTRALIA
The AquaBlade Blue diffuser is the only entirely Australian manufactured membrane diffuser on the market. It has been proudly developed by Aquatec Maxcon. The AquaBlade Blue diffuser is in the form of a long curved blade rather than a disc or cylinder typical of other membrane diffusers. This unique profile allows the diffuser to achieve greater floor coverage at lower system cost with superior ...
Manufactured by:Aquaconsult Anlagenbau GmbH based inTraiskirchen, AUSTRIA
The AEROSTRIP Type Q is one of the most powerful diffusers on the market. It was designed as a fine-bubble diffuser with extremely low energy requirements and has been used in both municipal and industrial wastewater treatment plants worldwide since 2005. The basic body of the AEROSTRIPs is made of high-quality PVC. Polyurethane is used as the material for the diffuser membrane. Polyurethane has ...
Manufactured by:Kamps s.a. based inBattice, BELGIUM
The air diffusers are world wide known to have a good aeration efficiency. This bottom aeration technique has also mixing capacities for the activated sludge in biological tanks with great depths. Air diffusers can be installed in both urban and industrial waste water treatment ...
Manufactured by:Aquaconsult Anlagenbau GmbH based inTraiskirchen, AUSTRIA
The AEROSTRIPc is the high end product among the diffusers. It was designed as a fine-bubble diffuser with extremely low energy requirements and has been used in both municipal and industrial wastewater treatment plants worldwide since 1995. The diffuser body is made of high-alloy, corrosion-resistant stainless steel. This makes the AEROSTRIP Type T a durable and therefore particularly ...