Refine by
Applications
- Multiprobes for Surface Water
- Multiprobes for Harmful Algal Bloom
- Multiprobes for Coastal
- Multiprobes for Stormwater
- Multiprobes for Aquaculture
- Multiprobes for Sourcewater
- Multiprobes for Groundwater
- Multiprobes for Dye Tracing
- Multiprobes for Dredging
- Multiprobes for Multiprobes for Dredging
- Multiprobes for Wastewater
- Multiprobes for Oil & Gas
- Multiprobes for Early Warning
- Aviation Meteorology
- Transport Meteorology
- Channel Networks solutions for Seepage Water
- Water Monitoring Technology for Flood Warning Areas
- Meteorological sensors for traffic weather sector
- Meteorological sensors for aviation weather sector
- Channel Networks - Fix Installation Measurements for no shutting down the flow areas
- Channel Networks - Fix Installation Measurements for Flow Measurement In Pipe That Could Not Be Shut Down
- Channel networks solutions for replacement of measurement with inverted syphon sector
- Channel Networks - Fix Installation Measurements for hybrid flow measurement in main collector sector
- Water and Waste Water Measurement Instruments for Water
- Water and Waste Water Measurement Instruments for Wastewater
- Soil moisture monitoring solution for meteorology industry
- Gas Analysers for Heat Treatment
- Gas Analysers for Inert Gas Blanketing
- Mass Spectrometry Imaging System for Proteomics
- Maldi MSI in Drug Development
- Maldi MSI in Microbiology
- Mass Spectrometry Imaging System for Environmental Science
- Maldi MSI in Forensic Science
- Measuring the ocean surface solutions for ports & coastal industry
- Sensor-based solutions for food processing industry
- Sensor-based solutions for material recycling industry
- Sensor-based solutions for mining industry
- Hydronix Sensors for Measuring Moisture in Grain, Nuts and Pulses
- Hydronix Sensors for Measuring Moisture in Parboiled Rice Production
- Hydronix Sensors for Moisture Measurement in Animal Feed Manufacture
- Hydronix Sensors for Measuring Moisture in Sugar Beet Pulp for Animal Feed Production
- Hydronix Sensors for Concentration Measurement in Powder Production
- Hydronix Sensors for Measuring Moisture in Sugar (Brix Measurement)
- Hydronix Sensors for Recycled Asphalt Pavement (RAP)
- Hydronix Sensors for Foundry - Green Sand
- Hydronix Sensors for Glass - Sand
- Hydronix Sensors for Pulverised Fuel Ash (Blast Furnace Slag)
- Hydronix Sensors for Roof Tiles
- Hydronix Sensors for Sand Lime Bricks
- Hydronix Sensors for Pet Food / Kibble
- Hydronix Sensors for Almonds
- Hydronix Sensors for Beans & Pulses
- Hydronix Sensors for Coffee
- Hydronix Sensors for Nuts
- Hydronix Sensors for Seeds
- Hydronix Sensors for Soya
- Hydronix Sensors for Hops
- Hydronix Sensors for Calandria
- Hydronix Sensors for Sugar Manufacturing
- Hydronix Sensors for Biomass Materials
- Hydronix Sensors for Biological Waste
- Hydronix Sensors for Wood Pellets
- Hydronix Sensors for Coal
- Hydronix Sensors for Pulped Paper
- Hydronix Sensors for Oils
- Advanced cable handling solutions for defense industry
- Advanced cable handling solutions for environmental industry
- Advanced cable handling solutions for industrial industry
- Advanced cable handling solutions for offshore industry
- Advanced cable handling solutions for marine science industry
- Focal Molography Solution for Bioprocess
- Focal Molography Solution for Drug Screening
- Focal Molography Solution for Cell and Gene Therapy
- Moisture measurement in bulk solid processes and food manufacturing industry
- qCell T Series for Cell Analysis
Surface Sensor Equipment & Supplies
392 equipment items found
Manufactured by:Electronic Development Labs, Inc. (EDL) based inDanville, VIRGINIA (USA)
EDL’s SS Surface Sensor is the number one choice for dependable, reliable, and accurate surface temperature measurements across industries. It is a longtime favorite of the gas, pipe fusion, and utilities industries. Hand-crafted and made in America, the SS is produced from the finest materials available. This sensor is ...
Manufactured by:Spectros Medical Devices Inc. based inHouston, TEXAS (USA)
The 1cm surface sensor is for a similar surface application and is ideal when a smaller skin paddle is available. The 1cm sensor size is also a good option when used during more complex head and neck ...
Manufactured by:Spectros Medical Devices Inc. based inHouston, TEXAS (USA)
The surface sensor is used most commonly to monitor free tissue flaps. It is easy to place and quick to monitor the surface of tissue. Using VLS the T-Stat sensors measure in the capillary bed for a near absolute ...
Manufactured by:Electronic Development Labs, Inc. (EDL) based inDanville, VIRGINIA (USA)
EDL’s Teflon Tip Surface Sensors are similar to standard Surface Sensors and are designed to measure all flat surfaces without any damage. These sensors deliver fast response times as well as high accuracy. Teflon Surface Sensors are ideal for use on ...
Manufactured by:Electronic Development Labs, Inc. (EDL) based inDanville, VIRGINIA (USA)
EDL's Roller Band Surface Sensors are designed to work on flat and moving surfaces. The three wheels give you more control and smoother tracking on high speed surfaces, and assure proper surface contact on the band for fast accurate temperature readings. The bands are constructed from thick full-hard Stainless ...
Manufactured by:Reichert Technologies Life Sciences based inDepew, NEW YORK (USA)
Reichert, Inc. offers a comprehensive line-up of Surface Plasmon Resonance (SPR) systems, designed for advanced biomolecular interaction analysis. The 2-channel Reichert 2SPR system is recognized for its high sensitivity and detection capabilities, making it suitable for research in leading universities and biotech startups. This system offers a cost-efficient solution by being up to 30% more ...
Manufactured by:PV-Engineering GmbH based inIserlohn, GERMANY
The extension cable for the external Pt100 surface temperature sensor can be used if the standard cable (10m) are too short for the respective ...
Manufactured by:M.A.E. Srl based inFrosolone (IS), ITALY
3 components Seismonitor is designed for seismological, engineering and scientific studies where a passive, low noise, short period triaxial sensor is required. Seismonitor contains three triaxially oriented, GS-1 low frequency seismometers installed in a single deployment ...
Manufactured by:4B Africa based inJohannesburg, SOUTH AFRICA
VIBMIL is a vibration sensor designed for continuous monitoring of vibration levels in industrial environments. It is current loop powered accelerometer and delivers accurate vibration RMS velocity using a 4-20 mA output. Built with a stainless-steel enclosure, including a 3/4” NPT thread for conduit connection. The VIBMIL can be supplied with optional inbuilt NTC or PT100 temperature ...
Manufactured by:McMenon Engineering Services Limited based inSalterbeck, UNITED KINGDOM
There are times when it is of questionable value to penetrate the pipeline for a temperature measurement. A surface mounting sensor can be provided to measure the temperature of the outside of the pipeline. With reasonable lagging the accuracy of these sensors is virtually identical to a Thermowell ...
Manufactured by:LSI-Lastem srl based inSettala Premenugo, ITALY
Plate-made sensor for surface temperature measurements, ideal for measuring the surface temperature of solar panels. The compact size allows it to be installed even in small spaces. It can be easily fixed using sylicon, adhesive band or thermoconductive paste. ...
Manufactured by:Senstech AG based inFehraltorf, SWITZERLAND
The Surface Strain Sensor PR-011-0800 is a versatile device capable of indirectly measuring large forces on loaded plant components by directly measuring the deformation of the metal part it is welded into. This sensor utilizes a holder that firmly attaches it to the monitored part, enabling precise measurements of surface ...
Manufactured by:Shanghai Feilong Meters & Electronics Co., Ltd. based inShanghai, CHINA
Name: Feilong surface temperature sensor, probe diameter: 4mm, probe length: 75mm, probe material: SS304, type: K, temperature range: 0-800C, handle length: 120mm, certificates: ...
Manufactured by:Plexus Controls Inc. based inKanata, ONTARIO (CANADA)
The Intelligent Wireless System (IWS) nodes comprise of a range of distributed wireless products from Plexus Controls providing advanced supervisory, control and data acquisition (SCADA) functionality for commercial and industrial applications. With 'out the box' auto mesh wireless functionality, IWS nodes can be easily installed at a remote location and connected to standard sensors, supporting ...
Manufactured by:Kistler based in, SWITZERLAND
These robust strain sensors are particularly suitable for measuring dynamic and quasistatic forces on stationary or moving machine parts (indirect, force-proportional strain measurement). The strain in the basic structure is transfered on the sensor via the two contact surfaces resulting in a change in distance. The sensor ...
Manufactured by:Thought Technology Ltd. based inMontreal, QUEBEC (CANADA)
Temperature sensor measures skin surface temperature between 10°C – 45°C (50°F - 115°F ). It is supplied with a self adhering band for easy finger ...
Manufactured by:Sommer Messtechnik based inKoblach, AUSTRIA
Infrared sensor SIR to measure the snow surface temperature. The compact infrared sensor SIR provides for the exact and non-contact measurement of the temperature of the snow surface. ...
Manufactured by:4B Group based inLeeds, UNITED KINGDOM
VIBMIL is a vibration sensor designed for continuous monitoring of vibration levels in industrial environments. It is current loop powered accelerometer and delivers accurate vibration RMS velocity using a 4-20 mA output. Built with a stainless-steel enclosure, including a 3/4” NPT thread for conduit connection. The VIBMIL can be supplied with optional inbuilt NTC or PT100 temperature ...
Manufactured by:4B Africa based inJohannesburg, SOUTH AFRICA
The Milli-Temp Lug series can be used on any application where bearing and surface temperature monitoring is needed. The Milli Temp is a loop powered analogue sensor with a 4-20 mA linear output that is scaled across a temperature range for continuous temperature monitoring. The lug style adaptor bolts directly onto a bearing housing, motor, gearbox, or machine ...
Manufactured by:Teconer Oy based inHelsinki, FINLAND
Surface temperature sensor RTS411 can be used as a stand-alone unit in addition to integrating it into the Road condition monitoring system. The version RTS411SA includes the temperature sensor, enclosure with Bluetooth unit and a mobile phone for user interface in the vehicle and for data transmission to selected servers. ...