Refine by
Thermal Interface Material Equipment & Supplies
23 equipment items found
Manufactured by:Indian-Industries based inArlington, TEXAS (USA)
Thermal Interface Materials (TIM) help remove heat generated from the power source to the ambient environment. These thermally conductive products remove air gaps from the interface by conforming to the uneven mating surfaces, and as a result, reducing the component temperature and maximizing product ...
Manufactured by:Trumonytechs based inSuzhou, CHINA
Thermal conductivity tester: Besides the conventional test functions, Trumonytechs laboratory’s thermal conductivity tester features a wide thermal conductivity test range (0.1~45W/m*K) which can test most thermal conductive materials. With its advantages of good accuracy (test error ≤5%) and high test efficiency (average 15~20min test results) ,we significantly shorten the development ...
Manufactured by:Trumonytechs based inSuzhou, CHINA
We use a rotary evaporator to process the thermal conductive fillers and modify the fillers’ nature to highlight the uniqueness and excellence of the thermal interface materials further to enhance its competitiveness. Under the metal oxide powder processing technology, the thermal conductive fillers of ...
Manufactured by:Trumonytechs based inSuzhou, CHINA
Thermal conductive pads are mainly used to be installed between heat generating electronic components and heat sinks to provide an effective thermal interface environment. It improves the efficiency of heat dissipation between them. Within the thermal interface material industry, silicone ...
Manufactured by:Trumonytechs based inSuzhou, CHINA
Thermal conductive gel is a single-component silicone material in liquid state with high viscosity thermal conductivity, designed to provide heat transfer efficiency between different electronic components, a thermal interface material. It is mainly used to meet the demand of low pressure and ...
Manufactured by:Trumonytechs based inSuzhou, CHINA
Thermal conductive silicone grease is a paste-like compound, and is therefore also known as thermal conductive paste in the industry. It is designed to improve thermal conductivity between components by effectively filling the insulation gap and adding auxiliary fillers to improve heat transfer. Due to its excellent stability, thermal conductivity, temperature resistance, low oil separation and ...
Manufactured by:Trumonytechs based inSuzhou, CHINA
Thermal Conductive Structural Adhesive is an adhesive that can withstand large loads, is resistant to aging, fatigue and corrosion, has stable performance over its expected life, and is suitable for bonding structural parts that are subject to strong forces. The existing structural adhesives are mainly composed of three systems, namely polyurethane, epoxy and silicone systems. By adding thermal ...
Manufactured by:Trumonytechs based inSuzhou, CHINA
Potting Glue are very low viscosity gels that conduct heat, bond and seal. Liquid before curing, they flow well and can adequately fill small ...
Manufactured by:Shenzhen Union Tenda Technology Co., Ltd. based inGuanlan, Longhua, CHINA
LGS thermal graphite film is a new thermal interface material. It transfers heat along the two directions, shielding heat source and components meanwhile improving the performance of consumer electronics products. The thermal impedance of LGS is very small and can completely replace the high-performance ...
Manufactured by:Vincotech GmbH based inUnterhaching, GERMANY
It is used as a component that can handle high energy pulse. Engineered for mounting on a heat sink with pre-applied thermal interface material (“Phase Change Material”), the Q992-A provides an economic and easy assembly with excellent performance. This resistor is designed for applications with high energy ...
Manufactured by:Bodo Möller Chemie GmbH based inOffenbach am Main, GERMANY
HI-FLOW phase change materials are an excellent replacement for thermal paste and serve as a high-performance thermal interface material between a CPU or other heat generative components and a heat sink. At room temperature, the films are solid and liquify as the board heats up. ...
Manufactured by:Semikron Danfoss based inN?rnberg, GERMANY
In e-mobility applications reliability is the most important feature. Thanks to new thermal interface material with a 20% improvement in thermal resistance and AlCu-bonded diodes with higher current carrying capacity, the new SKiM-module can bring about an improvement of up to 23% with the same chip set and same lifetime or twice ...
Manufactured by:Shenzhen Union Tenda Technology Co., Ltd. based inGuanlan, Longhua, CHINA
High thermal conductive silicone pad is a high thermal conductivity Material. The raw material is from Japan Electric Denka (Denka) which made of high thermal conductivity spherical alumina powder and Dow Corning polymer, which is a cost-effective thermal filler.Natural micro-viscosity and ...
Manufactured by:Boyd Corporation based inPleasanton, CALIFORNIA (USA)
Boyd Fan Heat Sink Assemblies are pre-assembled complete thermal solutions for a variety of board level applications. Save time and space while increasing thermal performance with these compact solutions that are ready to install. Impinging air flow from the fan enables the cool intake air to contact more fin surface area, improving thermal ...
Manufactured by:CreeLED, Inc. based inDurham, NORTH CAROLINA (USA)
The XLamp® CHA LED family delivers an industry-leading combination of lumen density and efficacy in LES sizes as small as 3.3 mm. CHA family LEDs deliver 50% higher lumen density than the existing XLamp CMU family LEDs for significant improvements in beam angle and intensity. The XLamp CHA family LEDs are also compatible with the available ecosystem of holders and optics designed for ...
Manufactured by:CreeLED, Inc. based inDurham, NORTH CAROLINA (USA)
The XLamp® CHA LED family delivers an industry-leading combination of lumen density and efficacy in LES sizes as small as 3.3 mm. CHA family LEDs deliver 50% higher lumen density than the existing XLamp CMU family LEDs for significant improvements in beam angle and intensity. The XLamp CHA family LEDs are also compatible with the available ecosystem of holders and optics designed for ...
Manufactured by:Somnics, Inc. based inZhubei City, TAIWAN
The iF award-winning iNAP One sleep therapy system utilizes oral negative pressure technology to treat obstructive sleep apnea patients. The system includes an integrated console and a memory-fit oral interface. The iNAP One provides an intuitive user interface with a built-in rechargeable battery and an easy-to-clean saliva container, making it a perfect travel ...
Manufactured by:Somnics, Inc. based inZhubei City, TAIWAN
The iNAP Lite sleep therapy system utilizes oral negative pressure technology to treat obstructive sleep apnea patients. The iNAP Lite is designed to provide a comfortable sleep experience for OSA patients. During sleep, the iNAP Lite creates a gentle vacuum within the oral cavity to stabilize the tongue and soft tissues and free the airway. Unlike traditional CPAP machines, the iNAP Lite system ...
Manufactured by:ELANTAS based inWesel, GERMANY
In today’s digitized and highly technologized world, electronic products dominate our daily life. Regardless if it’s a smartphone, safety devices in cars or power tools– everything is driven by or controlled with electronic products, and we highly rely on them to make life comfortable and ...
Manufactured by:Boyd Corporation based inPleasanton, CALIFORNIA (USA)
Fans are the simplest and most cost-efficient method of increasing thermal performance. Adding a fan to a natural convection solution improves heat transfer by directing cooler air into, around and/or over primary thermal device, forcing heat and hot air out of an assembly. When ambient environment or natural convection cooling cannot sustain enough heat transfer for higher power applications, ...