Refine by
Tidal Power Equipment & Supplies
23 equipment items found
Manufactured by:SIMEC Atlantis Energy based inLondon, UNITED KINGDOM
The AR1500 is a Lockheed Martin designed, 1.5MW horizontal axis turbine complete with active pitch and yaw capability. The nacelle weighs approximately 150 tonnes in air and has a design life of 25 years. The rotor diameter is 18 meters and all key operational systems have triple redundancy built in to maximise reliability offshore. ...
by:Canadian Maritime Engineering Ltd. (CME) based inDartmouth, NOVA SCOTIA (CANADA)
Replace sluce gate, support seals, and idler sheaves for in service Tidal Generator. Annapolis Tidal Power operates the worlds first commercial Tidal power electric generating station which has been in service since 1984. Upgrades to structural components and hoisting systems and ...
Manufactured by:Tidal Electric Inc. based in, CONNECTICUT (USA)
Offshore tidal power generation (“tidal lagoons”) is a new approach to tidal power conversion that resolves the environmental and economic problems of the familiar “tidal barrage” technology. Tidal lagoons use a rubble mound impoundment structure and ...
Manufactured by:Water Powered Technologies Ltd based inCornwall, UNITED KINGDOM
21st century Tidal Lagoon utilising zero energy Venturo Pumps and Solar arrays for affordable and sustainable low-carbon energy generation. Current tidal lagoon designs capture energy directly from the tidal range via the lagoon’s turbine housing, limiting power generation windows to incoming and outgoing ...
Manufactured by:Tocardo B.V. based inWieringerwerf, NETHERLANDS
Tocardo brings innovative Dutch water technology to a whole new level with the T-2 tidal turbine. The T-2 turbine series comes next in line as a scaled up version of Tocardo’s most proven turbine, the T-1 series. Tocardo T-2 tidal turbines offer a step up in power generation capabilities on a commercial basis which benefit more industrial ...
Manufactured by:Kralovopolska kovarna s.r.o. based inBrno, CZECH REPUBLIC
We supply parts for customers throughout the Europe with highest quality request. Most of them are used in mechanical and high-speed gearboxes for HYDRO power, WIND and TIDAL power, THERMAL power, MINERAL and CEMENT processing , OFF-SHORE, RUBBER and CHEMICAL industry, STEEL and METALLURGY, OPEN-PIT and MINING industry, OIL and ...
Manufactured by:Kralovopolska kovarna s.r.o. based inBrno, CZECH REPUBLIC
We supply parts for customers throughout Europe with a focus on meeting high quality requests with highest quality request. Our parts are primarily used in HYDRO power, THERMAL power, NUCLEAR power, STEAM turbine components, INSIDE / GEOTHERMAL power plants, CRITICAL applications and WIND and TIDAL ...
Manufactured by:HydroQuest SAS based inMeylan, FRANCE
With an overall potential of around 100 GW, the development of marine tidal energy represents both an environmental and commercial opportunity. The Oceanquest turbine has demonstrated its performance for use in the world’s most powerful tidal sites. HydroQuest will thus confirm its position as a world leader in tidal energy ...
Manufactured by:Orbital Marine Power based inOrkney, UNITED KINGDOM
The SR2000 2MW is the largest and most powerful tidal turbine in the world. It has been designed to minimise the whole lifecycle cost of electricity production from tidal energy. Designed to DNV (Det Norske Veritas) standards with a 20 year design life, it incorporates components with proven reliability from the wind, gas and oil industries. ...
Manufactured by:SIMEC Atlantis Energy based inLondon, UNITED KINGDOM
Tidal stream energy presents one of the most exciting emerging forms of renewable energy. Tidal streams, unlike many other forms of renewable energy, are a consistent source of kinetic energy caused by regular tidal cycles influenced by the phases of the moon. Intermittency is a problem for wind, wave and solar power as the sun ...
Manufactured by:ESM Energie- und Schwingungstechnik Mitsch GmbH based inHeppenheim, GERMANY
ESM supports the industry with bushings developed to meet the specific requirements of each application. Those products are typically used to support gearboxes as part of the three-point suspension of the ...
Manufactured by:Nidec Industrial Solutions based inCinisello Balsamo, ITALY
An electrical pitch system essentially consists of the pitch drives, the inverter and the pitch control. In addition, there are the accumulators and ultra-caps as a back-up system so that a turbine can be safely driven out of the wind even in the event of a grid failure. In terms of power control, pitch systems are crucial for turbine performance because they turn the rotor blades as optimally as ...
by:Guinard Energies Nouvelles based inBrest, FRANCE
Developed by Guinard Energies and its partners, this container of regulation, conversion and storage includes all the organs dedicated to the operation and supervision of your hybrid production plant composed of one to several P154 turbines. Capable of hosting an auxiliary production source (photovoltaic, wind, fuel cell, ...) and a battery of several kWh, this device will allow you to ...
Manufactured by:Nova Innovation Ltd based inEdinburgh, UNITED KINGDOM
Tidal energy is clean, predictable and reliable. Nova turbines sit on the seabed and have no visual impact on the landscape. They offer a cost-competitive alternative to fossil fuels. ...
by:Guinard Energies Nouvelles based inBrest, FRANCE
Developed by Guinard Energies, this regulation and conversion converter, coupled with a Poseide 66 tidal turbine, makes it possible to get the most out of the potential of your tidal turbine and to manage energy fluences. Capable of hosting an auxiliary production source ( photovoltaic, small wind turbines) as well as a battery storage facility, the C66 Hybrid 2.6 Converter will answer all ...
Manufactured by:Tuapeka Turbines based in, NEW ZEALAND
There is a need in developing countries for a simple inexpensive means of harnessing the seasonal low head energy flow of rivers. The linear turbine which consists of a cascade of vanes moving in a horizontal loop across the river flow, is ideally suited to this application since, due to low flow loadings and simple design, it can be constructed from locally available material and by local ...
Manufactured by:PM Generators Ltd. based inSanta Monica, CALIFORNIA (USA)
Our permanent magnet generators have been used in a wide variety of hydroelectric applications. From penstocks to tidal projects, the company’s generators have stood the test of time by providing reliability and affordability in an industry where it is vital. We currently provide permanent magnet alternators for up to 100 KW ...
Manufactured by:Verdant Power, Inc. based inNew York, NEW YORK (USA)
Verdant Power’s Tidal Turbine System is a turnkey water-to-wire system utilizing horizontal-axis turbines to convert the kinetic energy of fast-moving (> 1.0 m/s) water currents into clean renewable electricity. Multiple turbines are deployed on mounts in a field array fully underwater and not visible from the ...
by:Vattenfall AB based inSolna, SWEDEN
Ocean energy is a renewable energy source, in which electricity can be generated from tidal streams, waves or differences in salinity. Over 70 per cent of the Earth is covered by water. The ocean is subject to the impact of wind, tides and ocean currents and thus carries with it large quantities of energy. This means that the 'fuel' is inexhaustible and free. The different forms of ocean energy ...
Manufactured by:S&C Electric Company based inChicago, ILLINOIS (USA)
PureWave DSTATCOM is a fast-compensating reactive power source that can reduce voltage variations and voltage instability in the transmission system, and can assist in quick recovery after contingency events. S&C’s PureWave DSTATCOM Distributed Static Compensator is a fast-compensating reactive power source that’s applied on the transmission or distribution system to reduce ...